Patchwork Remove warnings of Mahogany(_fam10)

login
register
about
Submitter Bao, Zheng
Date 2010-03-22 06:24:52
Message ID <DD1CC71B621B004FA76856E5129D6B17038E4130@sbjgexmb1.amd.com>
Download mbox | patch
Permalink /patch/1119/
State Superseded
Headers show

Comments

Bao, Zheng - 2010-03-22 06:24:52
Remove the building warnings.

Signed-off-by: Zheng Bao <zheng.bao@amd.com>

  * pull it up before training the slot.
@@ -65,42 +69,16 @@
 	pci_write_config16(sm_dev, 0xA8, word);
 }
 
-/********************************************************
-* mahogany uses SB700 GPIO8 to detect IDE_DMA66.
-* IDE_DMA66 is routed to GPIO 8. So we read Gpio 8 to
-* get the cable type, 40 pin or 80 pin?
-********************************************************/
-static void get_ide_dma66()
-{
-	u8 byte;
-	/*u32 sm_dev, ide_dev; */
-	device_t sm_dev, ide_dev;
-
-	sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
-
-	byte = pci_read_config8(sm_dev, 0xA9);
-	byte |= (1 << 4);	/* Set Gpio8 as input */
-	pci_write_config8(sm_dev, 0xA9, byte);
-
-	ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1));
-	byte = pci_read_config8(ide_dev, 0x56);
-	byte &= ~(7 << 0);
-	if ((1 << 4) & pci_read_config8(sm_dev, 0xAA))
-		byte |= 2 << 0;	/* mode 2 */
-	else
-		byte |= 5 << 0;	/* mode 5 */
-	pci_write_config8(ide_dev, 0x56, byte);
-}
-
 /*************************************************
 * enable the dedicated function in mahogany board.
 * This function called early than rs780_enable.
 *************************************************/
-void mahogany_enable(device_t dev)
+static void mahogany_enable(device_t dev)
 {
-	struct mainboard_config *mainboard =
+	/* leave it here for future. */
+	/*struct mainboard_config *mainboard =
 	    (struct mainboard_config *)dev->chip_info;
-
+	*/
 	printk_info("Mainboard MAHOGANY Enable. dev=0x%p\n", dev);
 
 #if (CONFIG_GFXUMA == 1)
@@ -144,17 +122,16 @@
 #endif
 
 	set_pcie_dereset();
-	/* get_ide_dma66(); */
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
+void add_mainboard_resources(struct lb_memory *mem)
 {
 	/* UMA is removed from system memory in the northbridge code,
but
 	 * in some circumstances we want the memory mentioned as
reserved.
  	 */
 #if (CONFIG_GFXUMA == 1)
-	printk_info("uma_memory_start=0x%x, uma_memory_size=0x%x \n",
-	uma_memory_base, uma_memory_size);
+	printk_info("uma_memory_start=0x%llx, uma_memory_size=0x%llx
\n",
+		    uma_memory_base, uma_memory_size);
 	lb_add_memory_range(mem, LB_MEM_RESERVED,
 		uma_memory_base, uma_memory_size);
 #endif

Patch

Index: src/mainboard/amd/mahogany/mptable.c
===================================================================
--- src/mainboard/amd/mahogany/mptable.c	(revision 5265)
+++ src/mainboard/amd/mahogany/mptable.c	(working copy)
@@ -39,6 +39,8 @@ 
 
 extern void get_bus_conf(void);
 
+void *smp_write_config_table(void *v);
+
 void *smp_write_config_table(void *v)
 {
 	static const char sig[4] = "PCMP";
Index: src/mainboard/amd/mahogany/acpi_tables.c
===================================================================
--- src/mainboard/amd/mahogany/acpi_tables.c	(revision 5265)
+++ src/mainboard/amd/mahogany/acpi_tables.c	(working copy)
@@ -101,6 +101,7 @@ 
 
 extern void get_bus_conf(void);
 
+#if CONFIG_ACPI_SSDTX_NUM >= 1
 static void update_ssdtx(void *ssdtx, int i)
 {
 	uint8_t *PCI;
@@ -122,6 +123,7 @@ 
 	/* FIXME: need to update the GSI id in the ssdtx too */
 
 }
+#endif
 
 unsigned long acpi_fill_ssdt_generator(unsigned long current, const
char *oem_table_id) {
 	k8acpi_write_vars();
Index: src/mainboard/amd/mahogany/mainboard.c
===================================================================
--- src/mainboard/amd/mahogany/mainboard.c	(revision 5265)
+++ src/mainboard/amd/mahogany/mainboard.c	(working copy)
@@ -35,6 +35,10 @@ 
 
 uint64_t uma_memory_base, uma_memory_size;
 
+void set_pcie_dereset(void);
+void set_pcie_reset(void);
+void add_mainboard_resources(struct lb_memory *mem);
+
 /*
  * Mahogany uses GPIO 6 as PCIe slot reset, GPIO4 as GFX slot reset. We
need to
  * pull it up before training the slot.
@@ -65,42 +69,16 @@ 
 	pci_write_config16(sm_dev, 0xA8, word);
 }
 
-/********************************************************
-* mahogany uses SB700 GPIO8 to detect IDE_DMA66.
-* IDE_DMA66 is routed to GPIO 8. So we read Gpio 8 to
-* get the cable type, 40 pin or 80 pin?
-********************************************************/
-static void get_ide_dma66()
-{
-	u8 byte;
-	/*u32 sm_dev, ide_dev; */
-	device_t sm_dev, ide_dev;
-
-	sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
-
-	byte = pci_read_config8(sm_dev, 0xA9);
-	byte |= (1 << 4);	/* Set Gpio8 as input */
-	pci_write_config8(sm_dev, 0xA9, byte);
-
-	ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1));
-	byte = pci_read_config8(ide_dev, 0x56);
-	byte &= ~(7 << 0);
-	if ((1 << 4) & pci_read_config8(sm_dev, 0xAA))
-		byte |= 2 << 0;	/* mode 2 */
-	else
-		byte |= 5 << 0;	/* mode 5 */
-	pci_write_config8(ide_dev, 0x56, byte);
-}
-
 /*************************************************
 * enable the dedicated function in mahogany board.
 * This function called early than rs780_enable.
 *************************************************/
-void mahogany_enable(device_t dev)
+static void mahogany_enable(device_t dev)
 {
-	struct mainboard_config *mainboard =
+	/* leave it here for future. */
+	/*struct mainboard_config *mainboard =
 	    (struct mainboard_config *)dev->chip_info;
-
+	*/
 	printk_info("Mainboard MAHOGANY Enable. dev=0x%p\n", dev);
 
 #if (CONFIG_GFXUMA == 1)
@@ -144,17 +122,16 @@ 
 #endif
 
 	set_pcie_dereset();
-	/* get_ide_dma66(); */
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
+void add_mainboard_resources(struct lb_memory *mem)
 {
 	/* UMA is removed from system memory in the northbridge code,
but
 	 * in some circumstances we want the memory mentioned as
reserved.
  	 */
 #if (CONFIG_GFXUMA == 1)
-	printk_info("uma_memory_start=0x%x, uma_memory_size=0x%x \n",
-	uma_memory_base, uma_memory_size);
+	printk_info("uma_memory_start=0x%llx, uma_memory_size=0x%llx
\n",
+		    uma_memory_base, uma_memory_size);
 	lb_add_memory_range(mem, LB_MEM_RESERVED,
 		uma_memory_base, uma_memory_size);
 #endif
Index: src/mainboard/amd/mahogany/get_bus_conf.c
===================================================================
--- src/mainboard/amd/mahogany/get_bus_conf.c	(revision 5265)
+++ src/mainboard/amd/mahogany/get_bus_conf.c	(working copy)
@@ -63,6 +63,8 @@ 
 
 static u32 get_bus_conf_done = 0;
 
+void get_bus_conf(void);
+
 void get_bus_conf(void)
 {
 	u32 apicid_base;
Index: src/mainboard/amd/mahogany_fam10/acpi_tables.c
===================================================================
--- src/mainboard/amd/mahogany_fam10/acpi_tables.c	(revision 5265)
+++ src/mainboard/amd/mahogany_fam10/acpi_tables.c	(working copy)
@@ -92,7 +92,8 @@ 
 extern void get_bus_conf(void);
 extern void update_ssdt(void *ssdt);
 
-
+/* not tested yet. */
+#if 0				/* #if 0 //CONFIG_ACPI_SSDTX_NUM >= 1 */
 static void update_ssdtx(void *ssdtx, int i)
 {
 	u8 *PCI;
@@ -115,6 +116,7 @@ 
 	/* FIXME: need to update the GSI id in the ssdtx too */
 
 }
+#endif
 
 unsigned long write_acpi_tables(unsigned long start)
 {
@@ -129,11 +131,7 @@ 
 	acpi_facs_t *facs;
 	acpi_header_t *dsdt;
 	acpi_header_t *ssdt;
-	acpi_header_t *ssdtx;
-	u8 *p;
 
-	int i;
-
 	get_bus_conf(); //it will get sblk, pci1234, hcdn, and sbdn
 
 	/* Align ACPI tables to 16 bytes */
Index: src/mainboard/amd/mahogany_fam10/devicetree.cb
===================================================================
--- src/mainboard/amd/mahogany_fam10/devicetree.cb	(revision 5265)
+++ src/mainboard/amd/mahogany_fam10/devicetree.cb	(working copy)
@@ -143,5 +143,3 @@ 
 #	 end
 
 end
-
-
Index: src/mainboard/amd/mahogany_fam10/mptable.c
===================================================================
--- src/mainboard/amd/mahogany_fam10/mptable.c	(revision 5265)
+++ src/mainboard/amd/mahogany_fam10/mptable.c	(working copy)
@@ -39,6 +39,8 @@ 
 
 extern void get_bus_conf(void);
 
+void *smp_write_config_table(void *v);
+
 void *smp_write_config_table(void *v)
 {
 	static const char sig[4] = "PCMP";
Index: src/mainboard/amd/mahogany_fam10/mainboard.c
===================================================================
--- src/mainboard/amd/mahogany_fam10/mainboard.c	(revision 5265)
+++ src/mainboard/amd/mahogany_fam10/mainboard.c	(working copy)
@@ -35,6 +35,10 @@ 
 
 uint64_t uma_memory_base, uma_memory_size;
 
+void set_pcie_dereset(void);
+void set_pcie_reset(void);
+void add_mainboard_resources(struct lb_memory *mem);
+
 /*
  * Mahogany uses GPIO 6 as PCIe slot reset, GPIO4 as GFX slot reset. We
need to