Patchwork warning days - m57sli/mcp55

>
>
> This fixes a number of warnings when building m57sli (and other boards with mcp55).
>
> This patch is boot tested on m57sli.
>
> What appears to be a shortening of the delay in
>
>   src/southbridge/nvidia/mcp55/mcp55_early_setup_car.c
>
> is functionally exactly the same as before; the delayx function takes a uint8_t
> argument, so the old value (1000 - 0x3E8) was truncated to 232 (0xE8). 
>
> Signed-off-by: Ward Vandewege <ward@gnu.org>
>
>   

>  
> Index: src/southbridge/nvidia/mcp55/mcp55_early_setup_car.c
> ===================================================================
> --- src/southbridge/nvidia/mcp55/mcp55_early_setup_car.c	(revision 5411)
> +++ src/southbridge/nvidia/mcp55/mcp55_early_setup_car.c	(working copy)
> @@ -177,7 +177,7 @@
>  	pci_write_config32(dev, 0xe4, dword);
>  
>  //	need to wait 100ms
> -	delayx(1000);
> +	delayx(232);
>  }
>   
it sounds a lot to do 0x8000 outb to wait 100us, but who knows...
I think it would be better to change the input type to something else
than uint8_t, supposedly "unsigned" as most other udelay functions.

Alternatively you could try if this works:

uint32_t tgio_ctrl;
@@ -170,14 +164,14 @@
outl(tgio_ctrl, anactrl_io_base + 0xcc);

// wait 100us
- delayx(1);
+ udelay(100);

dword = pci_read_config32(dev, 0xe4);
dword &= ~(0x3f0); // enable
pci_write_config32(dev, 0xe4, dword);

// need to wait 100ms
- delayx(1000);
+ udelay(100 * 1000);
}

static void mcp55_early_setup(unsigned mcp55_num, unsigned *busn,
unsigned *devn, unsigned *io_base, unsigned *pci_e_x)





>  
> Index: src/mainboard/gigabyte/m57sli/fanctl.c
> ===================================================================
> --- src/mainboard/gigabyte/m57sli/fanctl.c	(revision 5411)
> +++ src/mainboard/gigabyte/m57sli/fanctl.c	(working copy)
> @@ -71,6 +71,7 @@
>  /*
>   * Called from superio.c
>   */
> +extern void init_ec(uint16_t base);
>  void init_ec(uint16_t base)
>  {
>  	int i;
>   

init_ec() is the API between the superio drivers and the mainboard
drivers...

If this is a single hack, it's fine as it is.. If we're going to have an
API here, we should create a src/include/superio.h or some such

>  
> Index: src/northbridge/amd/amdk8/exit_from_self.c
> ===================================================================
> --- src/northbridge/amd/amdk8/exit_from_self.c	(revision 5411)
> +++ src/northbridge/amd/amdk8/exit_from_self.c	(working copy)
> @@ -17,6 +17,8 @@
>   * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
>   */
>  
> +extern void exit_from_self(int controllers, const struct mem_controller *ctrl,
> +        struct sys_info *sysinfo);
>  void exit_from_self(int controllers, const struct mem_controller *ctrl,
>  		    struct sys_info *sysinfo)
>  {
>   
since this is a C file that is included in exactly one file,
"raminit_f.c" you could as well just mark the function "static".

btw, for function prototypes the extern in not really needed. I keep
removing them from the tree, but if people think we should have them,
I'll try to be consistent and stop deleting them :-)

Stefan

Acked-by: Stefan Reinauer <stepan@coresystems.de>