===================================================================
@@ -3,5 +3,7 @@
unsigned long compute_ip_checksum(void *addr, unsigned long length);
unsigned long add_ip_checksums(unsigned long offset, unsigned long sum, unsigned long new);
+void str2ip(const char *str, unsigned char *ip);
+void str2mac(const char *str, unsigned char *mac);
#endif /* IP_CHECKSUM_H */
===================================================================
@@ -0,0 +1,26 @@
+#ifndef _NE2K_H__
+#define _NE2K_H__
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+void ne2k_append_data(unsigned char *d, int len, unsigned int base);
+int ne2k_init(unsigned int eth_nic_base);
+void ne2k_transmit(unsigned int eth_nic_base);
+
+#endif /* _NE2K_H */
===================================================================
@@ -1,5 +1,4 @@
menu "Console options"
-
# TODO: Rename to SERIAL_CONSOLE once Kconfig transition is complete.
config CONSOLE_SERIAL8250
bool "Serial port console output"
@@ -130,6 +129,48 @@
help
If not selected, the last adapter found will be used.
+config CONSOLE_NE2K
+ bool "Network console over NE2000 compatible Ethernet adapter"
+ default y
+ help
+ Send coreboot debug output to a Ethernet console, it works
+ same way as Linux netconsole, packets are received to UDP
+ port 6666 on IP/MAC specified with options bellow.
+
+config CONSOLE_NE2K_DST_MAC
+ depends on CONSOLE_NE2K
+ string "Destination MAC address of remote system"
+ default "00:13:d4:76:a2:ac"
+ help
+ Type in either MAC address of logging system or MAC address
+ of the router.
+
+config CONSOLE_NE2K_DST_IP
+ depends on CONSOLE_NE2K
+ string "Destination IP of logging system"
+ default "10.0.1.27"
+ help
+ This is IP adress of the system running for example
+ netcat command to dump the packets.
+
+config CONSOLE_NE2K_SRC_IP
+ depends on CONSOLE_NE2K
+ string "IP adress of Coreboot system"
+ default "10.0.1.253"
+ help
+ This is the IP of the Coreboot system
+
+config CONSOLE_NE2K_IO_PORT
+ depends on CONSOLE_NE2K
+ hex "NE2000 adapter fixed IO port address"
+ default 0xe00
+ help
+ This is the IO port address for the IO port
+ on the card, please select some non-conflicting region,
+ 32 bytes of IO spaces will be used (and align on 32 bytes
+ boundary)
+
+
choice
prompt "Maximum console log level"
default MAXIMUM_CONSOLE_LOGLEVEL_8
===================================================================
@@ -0,0 +1,37 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ * Copyright (C) 2010 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <console/ne2k.h>
+
+static void ne2k_tx_byte(unsigned char data)
+{
+ ne2k_append_data(&data, 1, CONFIG_CONSOLE_NE2K_IO_PORT);
+}
+
+static void ne2k_tx_flush(void)
+{
+ ne2k_transmit(CONFIG_CONSOLE_NE2K_IO_PORT);
+}
+
+static const struct console_driver ne2k_console __console = {
+ .tx_byte = ne2k_tx_byte,
+ .tx_flush = ne2k_tx_flush,
+};
===================================================================
@@ -7,11 +7,14 @@
#include <arch/hlt.h>
#include <arch/io.h>
+#if CONFIG_CONSOLE_NE2K
+#include <console/ne2k.h>
+#endif
+
#ifndef __PRE_RAM__
#include <string.h>
#include <pc80/mc146818rtc.h>
-
/* initialize the console */
void console_init(void)
{
@@ -99,6 +102,10 @@
void console_init(void)
{
+
+#if CONFIG_CONSOLE_NE2K
+ ne2k_init(CONFIG_CONSOLE_NE2K_IO_PORT);
+#endif
static const char console_test[] =
"\n\ncoreboot-"
COREBOOT_VERSION
===================================================================
@@ -15,6 +15,7 @@
driver-$(CONFIG_CONSOLE_BTEXT) += btext_console.o
driver-$(CONFIG_CONSOLE_BTEXT) += font-8x16.o
driver-$(CONFIG_CONSOLE_LOGBUF) += logbuf_console.o
+driver-$(CONFIG_CONSOLE_NE2K) += ne2k_console.o
$(obj)/console/console.o : $(obj)/build.h
$(obj)/console/console.initobj.o : $(obj)/build.h
===================================================================
@@ -0,0 +1,315 @@
+/*
+ETHERBOOT - BOOTP/TFTP Bootstrap Program
+
+Author: Martin Renters
+ Date: May/94
+
+ This code is based heavily on David Greenman's if_ed.c driver
+
+ Copyright (C) 1993-1994, David Greenman, Martin Renters.
+ This software may be used, modified, copied, distributed, and sold, in
+ both source and binary form provided that the above copyright and these
+ terms are retained. Under no circumstances are the authors responsible for
+ the proper functioning of this software, nor do the authors assume any
+ responsibility for damages incurred with its use.
+
+Multicast support added by Timothy Legge (timlegge@users.sourceforge.net) 09/28/2003
+Relocation support added by Ken Yap (ken_yap@users.sourceforge.net) 28/12/02
+3c503 support added by Bill Paul (wpaul@ctr.columbia.edu) on 11/15/94
+SMC8416 support added by Bill Paul (wpaul@ctr.columbia.edu) on 12/25/94
+3c503 PIO support added by Jim Hague (jim.hague@acm.org) on 2/17/98
+RX overrun by Klaus Espenlaub (espenlaub@informatik.uni-ulm.de) on 3/10/99
+ parts taken from the Linux 8390 driver (by Donald Becker and Paul Gortmaker)
+SMC8416 PIO support added by Andrew Bettison (andrewb@zip.com.au) on 4/3/02
+ based on the Linux 8390 driver (by Donald Becker and Paul Gortmaker)
+
+(C) Rudolf Marek <r.marek@assembler.cz> Simplify for RTL8029, Add coreboot glue logic
+
+*/
+
+#define ETH_ALEN 6 /* Size of Ethernet address */
+#define ETH_HLEN 14 /* Size of ethernet header */
+#define ETH_ZLEN 60 /* Minimum packet */
+#define ETH_FRAME_LEN 1514 /* Maximum packet */
+#define ETH_DATA_ALIGN 2 /* Amount needed to align the data after an ethernet header */
+#define ETH_MAX_MTU (ETH_FRAME_LEN-ETH_HLEN)
+
+#include "ns8390.h"
+#include <ip_checksum.h>
+#include <console/ne2k.h>
+#include <arch/io.h>
+
+#define MEM_SIZE MEM_32768
+#define TX_START 64
+#define RX_START (64 + D8390_TXBUF_SIZE)
+
+static unsigned int get_count(unsigned int eth_nic_base) {
+ unsigned int ret;
+ outb(D8390_COMMAND_RD2 + D8390_COMMAND_PS1,
+ eth_nic_base + D8390_P0_COMMAND);
+
+ ret = inb(eth_nic_base + 8 + 0) | (inb(eth_nic_base + 8 + 1) << 8);
+
+ outb(D8390_COMMAND_RD2 + D8390_COMMAND_PS0,
+ eth_nic_base + D8390_P0_COMMAND);
+ return ret;
+}
+
+static void set_count(unsigned int eth_nic_base, unsigned int what) {
+
+ outb(D8390_COMMAND_RD2 + D8390_COMMAND_PS1,
+ eth_nic_base + D8390_P0_COMMAND);
+
+ outb(what & 0xff,eth_nic_base + 8);
+ outb((what >> 8) & 0xff,eth_nic_base + 8 + 1);
+
+ outb(D8390_COMMAND_RD2 + D8390_COMMAND_PS0,
+ eth_nic_base + D8390_P0_COMMAND);
+
+}
+
+
+static void eth_pio_write(unsigned char *src, unsigned int dst, unsigned int cnt,
+ unsigned int eth_nic_base) {
+
+ outb(D8390_COMMAND_RD2 | D8390_COMMAND_STA, eth_nic_base + D8390_P0_COMMAND);
+
+ outb(D8390_ISR_RDC, eth_nic_base + D8390_P0_ISR);
+
+ outb(cnt, eth_nic_base + D8390_P0_RBCR0);
+
+ outb(cnt >> 8, eth_nic_base + D8390_P0_RBCR1);
+
+ outb(dst, eth_nic_base + D8390_P0_RSAR0);
+
+ outb(dst >> 8, eth_nic_base + D8390_P0_RSAR1);
+
+ outb(D8390_COMMAND_RD1 | D8390_COMMAND_STA, eth_nic_base + D8390_P0_COMMAND);
+
+ while (cnt--) {
+ outb(*(src++), eth_nic_base + NE_ASIC_OFFSET + NE_DATA);
+ }
+
+#warning "Add timeout"
+ /* wait for operation finish */
+ while ((inb(eth_nic_base + D8390_P0_ISR) & D8390_ISR_RDC) != D8390_ISR_RDC)
+ ;
+}
+
+void ne2k_append_data(unsigned char *d, int len, unsigned int base) {
+ eth_pio_write(d, (TX_START << 8) + 42 + get_count(base), len, base);
+ set_count(base, get_count(base)+len);
+}
+
+
+static void ns8390_tx_header(unsigned int eth_nic_base, int pktlen) {
+ unsigned short chksum;
+
+ unsigned char hdr[] = {
+ /*
+ * ETHERNET HDR
+ */
+
+ // destination macaddr
+ 0x02, 0x00, 0x00, 0x00, 0x00, 0x01,
+ /* source mac */
+ 0x02, 0x00, 0x00, 0xC0, 0xFF, 0xEE,
+ /* ethtype (IP) */
+ 0x08, 0x00,
+ /*
+ * IP HDR
+ */
+ 0x45, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00,
+ /* TTL, proto (UDP), chksum_hi, chksum_lo, IP0, IP1, IP2, IP3, */
+ 0x40, 0x11, 0x0, 0x0, 0x7f, 0x0, 0x0, 0x1,
+ /* IP0, IP1, IP2, IP3 */
+ 0xff, 0xff, 0xff, 0xff,
+ /*
+ * UDP HDR
+ */
+ /* SRC PORT DST PORT (2bytes each), ulen, uchksum (must be zero or correct */
+ 0x1a, 0x0b, 0x1a, 0x0a, 0x00, 0x9, 0x00, 0x00,
+ };
+
+ str2mac(CONFIG_CONSOLE_NE2K_DST_MAC, &hdr[0]);
+ str2ip(CONFIG_CONSOLE_NE2K_DST_IP, &hdr[30]);
+ str2ip(CONFIG_CONSOLE_NE2K_SRC_IP, &hdr[26]);
+
+ /* zero checksum */
+ hdr[24] = 0;
+ hdr[25] = 0;
+
+ /* update IP packet len */
+ hdr[16] = ((28 + pktlen) >> 8) & 0xff;
+ hdr[17] = (28 + pktlen) & 0xff;
+
+ /* update UDP len */
+ hdr[38] = (8 + pktlen) >> 8;
+ hdr[39] = 8 + pktlen;
+
+ chksum = compute_ip_checksum(&hdr[14], 20);
+
+ hdr[25] = chksum >> 8;
+ hdr[24] = chksum;
+
+ eth_pio_write(hdr, (TX_START << 8), sizeof(hdr), eth_nic_base);
+}
+
+void ne2k_transmit(unsigned int eth_nic_base) {
+ unsigned int pktsize;
+ unsigned int len = get_count(eth_nic_base);
+ int cnt = 10000;
+
+ // so place whole header inside chip buffer
+ ns8390_tx_header(eth_nic_base, len);
+
+ // commit sending now
+ outb(D8390_COMMAND_PS0 | D8390_COMMAND_RD2 | D8390_COMMAND_STA, eth_nic_base + D8390_P0_COMMAND);
+
+ outb(TX_START, eth_nic_base + D8390_P0_TPSR);
+
+ pktsize = 42 + len;
+ if (pktsize < 64)
+ pktsize = 64;
+
+ outb(pktsize, eth_nic_base + D8390_P0_TBCR0);
+ outb(pktsize >> 8, eth_nic_base + D8390_P0_TBCR1);
+
+ outb(D8390_ISR_PTX, eth_nic_base + D8390_P0_ISR);
+
+ outb(D8390_COMMAND_PS0 | D8390_COMMAND_TXP | D8390_COMMAND_RD2 | D8390_COMMAND_STA, eth_nic_base + D8390_P0_COMMAND);
+
+ /* wait for operation finish */
+ while ((inb(eth_nic_base + D8390_P0_ISR) & D8390_ISR_PTX) != D8390_ISR_PTX) {
+ //intk(BIOS_DEBUG, "TX\n");
+ if (cnt == 0) {
+ //printk(BIOS_DEBUG, "TX timeout\n");
+ break;
+ }
+ cnt --;
+ }
+
+ set_count(eth_nic_base, 0);
+}
+
+#ifdef __PRE_RAM__
+
+#include <arch/romcc_io.h>
+
+static void ns8390_reset(unsigned int eth_nic_base)
+{
+ int i;
+
+ outb(D8390_COMMAND_PS0 | D8390_COMMAND_RD2 |
+ D8390_COMMAND_STP, eth_nic_base + D8390_P0_COMMAND);
+
+ outb(0x48, eth_nic_base + D8390_P0_DCR);
+ outb(0, eth_nic_base + D8390_P0_RBCR0);
+ outb(0, eth_nic_base + D8390_P0_RBCR1);
+ outb(0x20, eth_nic_base + D8390_P0_RCR);
+ outb(2, eth_nic_base + D8390_P0_TCR);
+ outb(TX_START, eth_nic_base + D8390_P0_TPSR);
+ outb(RX_START, eth_nic_base + D8390_P0_PSTART);
+ outb(MEM_SIZE, eth_nic_base + D8390_P0_PSTOP);
+ outb(MEM_SIZE - 1, eth_nic_base + D8390_P0_BOUND);
+ outb(0xFF, eth_nic_base + D8390_P0_ISR);
+ outb(0, eth_nic_base + D8390_P0_IMR);
+
+ outb(D8390_COMMAND_PS1 |
+ D8390_COMMAND_RD2 | D8390_COMMAND_STP,
+ eth_nic_base + D8390_P0_COMMAND);
+
+ for (i = 0; i < ETH_ALEN; i++)
+ outb(0x0C, eth_nic_base + D8390_P1_PAR0 + i);
+
+ for (i = 0; i < ETH_ALEN; i++)
+ outb(0xFF, eth_nic_base + D8390_P1_MAR0 + i);
+
+ outb(RX_START, eth_nic_base + D8390_P1_CURR);
+ outb(D8390_COMMAND_PS0 |
+ D8390_COMMAND_RD2 | D8390_COMMAND_STA,
+ eth_nic_base + D8390_P0_COMMAND);
+ outb(0xFF, eth_nic_base + D8390_P0_ISR);
+ outb(0, eth_nic_base + D8390_P0_TCR);
+ outb(4, eth_nic_base + D8390_P0_RCR);
+ set_count(eth_nic_base, 0);
+}
+
+
+int ne2k_init(unsigned int eth_nic_base) {
+
+ device_t dev;
+ unsigned char c;
+
+ /* Power management controller */
+ dev = pci_locate_device(PCI_ID(0x10ec,
+ 0x8029), 0);
+
+ if (dev == PCI_DEV_INVALID)
+ return 0;
+
+ pci_write_config32(dev, 0x10, eth_nic_base | 1 );
+ pci_write_config8(dev, 0x4, 0x1);
+
+
+ c = inb(eth_nic_base + NE_ASIC_OFFSET + NE_RESET);
+ outb(c, eth_nic_base + NE_ASIC_OFFSET + NE_RESET);
+
+ (void) inb(0x84);
+
+ outb(D8390_COMMAND_STP | D8390_COMMAND_RD2, eth_nic_base + D8390_P0_COMMAND);
+ outb(D8390_RCR_MON, eth_nic_base + D8390_P0_RCR);
+
+ outb(D8390_DCR_FT1 | D8390_DCR_LS, eth_nic_base + D8390_P0_DCR);
+ outb(MEM_8192, eth_nic_base + D8390_P0_PSTART);
+ outb(MEM_16384, eth_nic_base + D8390_P0_PSTOP);
+
+ ns8390_reset(eth_nic_base);
+ return 1;
+}
+
+#else
+
+#include <delay.h>
+#include <stdlib.h>
+#include <string.h>
+#include <arch/io.h>
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+
+static void read_resources(struct device *dev)
+{
+ struct resource *res;
+
+ /* Fix the I/O Resources of the USB2.0 Interface */
+ res = new_resource(dev, PCI_BASE_ADDRESS_0);
+ res->base = CONFIG_CONSOLE_NE2K_IO_PORT;
+ res->size = 32;
+ res->align = 5;
+ res->gran = 5;
+ res->limit = res->base + res->size - 1;
+ res->flags = IORESOURCE_IO | IORESOURCE_FIXED | IORESOURCE_STORED |
+ IORESOURCE_ASSIGNED;
+ return;
+}
+
+
+static struct device_operations si_sata_ops = {
+ .read_resources = read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = 0,
+ .scan_bus = 0,
+};
+
+static const struct pci_driver si_sata_driver __pci_driver = {
+ .ops = &si_sata_ops,
+ .vendor = 0x10ec,
+ .device = 0x8029,
+};
+
+#endif
===================================================================
@@ -21,10 +21,14 @@
initobj-y += memcmp.o
initobj-y += cbfs.o
initobj-y += lzma.o
+initobj-$(CONFIG_CONSOLE_NE2K) += ne2k.o
+initobj-$(CONFIG_CONSOLE_NE2K) += compute_ip_checksum.o
+
#initobj-y += lzmadecode.o
obj-$(CONFIG_USBDEBUG_DIRECT) += usbdebug_direct.o
obj-$(CONFIG_COMPRESSED_PAYLOAD_LZMA) += lzma.o
+driver-$(CONFIG_CONSOLE_NE2K) += ne2k.o
obj-$(CONFIG_BOOTSPLASH) += jpeg.o
===================================================================
@@ -0,0 +1,110 @@
+/**************************************************************************
+ETHERBOOT - BOOTP/TFTP Bootstrap Program
+
+Author: Martin Renters
+ Date: Jun/94
+
+**************************************************************************/
+
+//FILE_LICENCE ( BSD2 );
+
+#define VENDOR_NONE 0
+#define VENDOR_WD 1
+#define VENDOR_NOVELL 2
+#define VENDOR_3COM 3
+
+#define FLAG_PIO 0x01
+#define FLAG_16BIT 0x02
+#define FLAG_790 0x04
+
+#define MEM_8192 32
+#define MEM_16384 64
+#define MEM_32768 128
+
+#define ISA_MAX_ADDR 0x400
+
+/**************************************************************************
+NE1000/2000 definitions
+**************************************************************************/
+#define NE_ASIC_OFFSET 0x10
+#define NE_RESET 0x0F /* Used to reset card */
+#define NE_DATA 0x00 /* Used to read/write NIC mem */
+
+#define COMPEX_RL2000_TRIES 200
+
+/**************************************************************************
+8390 Register Definitions
+**************************************************************************/
+#define D8390_P0_COMMAND 0x00
+#define D8390_P0_PSTART 0x01
+#define D8390_P0_PSTOP 0x02
+#define D8390_P0_BOUND 0x03
+#define D8390_P0_TSR 0x04
+#define D8390_P0_TPSR 0x04
+#define D8390_P0_TBCR0 0x05
+#define D8390_P0_TBCR1 0x06
+#define D8390_P0_ISR 0x07
+#define D8390_P0_RSAR0 0x08
+#define D8390_P0_RSAR1 0x09
+#define D8390_P0_RBCR0 0x0A
+#define D8390_P0_RBCR1 0x0B
+#define D8390_P0_RSR 0x0C
+#define D8390_P0_RCR 0x0C
+#define D8390_P0_TCR 0x0D
+#define D8390_P0_DCR 0x0E
+#define D8390_P0_IMR 0x0F
+#define D8390_P1_COMMAND 0x00
+#define D8390_P1_PAR0 0x01
+#define D8390_P1_PAR1 0x02
+#define D8390_P1_PAR2 0x03
+#define D8390_P1_PAR3 0x04
+#define D8390_P1_PAR4 0x05
+#define D8390_P1_PAR5 0x06
+#define D8390_P1_CURR 0x07
+#define D8390_P1_MAR0 0x08
+
+#define D8390_COMMAND_PS0 0x0 /* Page 0 select */
+#define D8390_COMMAND_PS1 0x40 /* Page 1 select */
+#define D8390_COMMAND_PS2 0x80 /* Page 2 select */
+#define D8390_COMMAND_RD2 0x20 /* Remote DMA control */
+#define D8390_COMMAND_RD1 0x10
+#define D8390_COMMAND_RD0 0x08
+#define D8390_COMMAND_TXP 0x04 /* transmit packet */
+#define D8390_COMMAND_STA 0x02 /* start */
+#define D8390_COMMAND_STP 0x01 /* stop */
+
+#define D8390_RCR_MON 0x20 /* monitor mode */
+
+#define D8390_DCR_FT1 0x40
+#define D8390_DCR_LS 0x08 /* Loopback select */
+#define D8390_DCR_WTS 0x01 /* Word transfer select */
+
+#define D8390_ISR_PRX 0x01 /* successful recv */
+#define D8390_ISR_PTX 0x02 /* successful xmit */
+#define D8390_ISR_RXE 0x04 /* receive error */
+#define D8390_ISR_TXE 0x08 /* transmit error */
+#define D8390_ISR_OVW 0x10 /* Overflow */
+#define D8390_ISR_CNT 0x20 /* Counter overflow */
+#define D8390_ISR_RDC 0x40 /* Remote DMA complete */
+#define D8390_ISR_RST 0x80 /* reset */
+
+#define D8390_RSTAT_PRX 0x01 /* successful recv */
+#define D8390_RSTAT_CRC 0x02 /* CRC error */
+#define D8390_RSTAT_FAE 0x04 /* Frame alignment error */
+#define D8390_RSTAT_OVER 0x08 /* FIFO overrun */
+
+#define D8390_TXBUF_SIZE 6
+#define D8390_RXBUF_END 32
+#define D8390_PAGE_SIZE 256
+
+struct ringbuffer {
+ unsigned char status;
+ unsigned char next;
+ unsigned short len;
+};
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
+
===================================================================
@@ -51,3 +51,45 @@
}
return (~checksum) & 0xFFFF;
}
+
+void str2ip(const char *str, unsigned char *ip)
+{
+ unsigned char c, i = 0;
+ unsigned char acc = 0;
+
+ do {
+ c = str[i];
+ if ((c >= '0') && (c <= '9')) {
+ acc *= 10;
+ acc += (c - '0');
+ } else {
+ *ip++ = acc;
+ acc = 0;
+ }
+ i++;
+ } while (c != '\0');
+}
+
+void str2mac(const char *str, unsigned char *mac)
+{
+ unsigned char c, i = 0;
+ unsigned char acc = 0;
+
+ do {
+ c = str[i];
+ if ((c >= '0') && (c <= '9')) {
+ acc *= 16;
+ acc += (c - '0');
+ } else if ((c >= 'a') && (c <= 'f')) {
+ acc *= 16;
+ acc += ((c - 'a') + 10) ;
+ } else if ((c >= 'A') && (c <= 'F')) {
+ acc *= 16;
+ acc += ((c - 'A') + 10) ;
+ } else {
+ *mac++ = acc;
+ acc = 0;
+ }
+ i++;
+ } while (c != '\0');
+}
===================================================================
@@ -21,8 +21,17 @@
#include <console/vtxprintf.h>
#include <uart8250.h>
+#if CONFIG_CONSOLE_NE2K
+#include <console/ne2k.h>
+#endif
+
static void console_tx_byte(unsigned char byte)
{
+#if CONFIG_CONSOLE_NE2K
+#ifdef __PRE_RAM__
+ ne2k_append_data(&byte, 1, CONFIG_CONSOLE_NE2K_IO_PORT);
+#endif
+#endif
if (byte == '\n')
uart8250_tx_byte(CONFIG_TTYS0_BASE, '\r');
@@ -41,6 +50,8 @@
va_start(args, fmt);
i = vtxprintf(console_tx_byte, fmt, args);
va_end(args);
-
+#if CONFIG_CONSOLE_NE2K
+ ne2k_transmit(CONFIG_CONSOLE_NE2K_IO_PORT);
+#endif
return i;
}
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, I hope here is a final version. I added the missing header files and did some random fixes (typos, Kconfig more descriptive, GPL in header file) Signed-off-by: Rudolf Marek <r.marek@assembler.cz> This patch adds support for console over Ethernet. Thanks, Rudolf -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkwGz9YACgkQ3J9wPJqZRNWwhACdE33j3MkMrJiZemlI2Jke5k8E U2IAn3DO8fAzX5wwCzkiSpyxaTmY/5bO =sdL0 -----END PGP SIGNATURE-----