===================================================================
@@ -352,7 +352,9 @@
}
/**
- * w83627: Enable MEMW# and set ROM size to max.
+ * Enable MEMW# and set ROM size to max.
+ * Supported chips:
+ * W83L517D, W83697HF/F/HG, W83697SF/UF/UG
*/
static void w836xx_memw_enable(uint16_t port)
{
@@ -1715,6 +1717,7 @@
{0x8086, 0x24D3, 0x1043, 0x80A6, 0x8086, 0x2578, 0x1043, 0x80F6,
NULL, NULL, NULL, "ASUS", "P4C800-E
Deluxe", 0, OK, intel_ich_gpio21_raise},
{0x8086, 0x2570, 0x1043, 0x80F2, 0x105A, 0x3373, 0x1043, 0x80F5,
NULL, NULL, NULL, "ASUS", "P4P800-E
Deluxe", 0, OK, intel_ich_gpio21_raise},
{0x8086, 0x2570, 0x1043, 0x80A5, 0x105A, 0x24D3, 0x1043, 0x80A6,
Tested and works. Thanks to Carl-Daniel Hailfinger for simplifying the chipset enable for this board! NULL, NULL, NULL, "ASUS", "P4SD-LA", 0, NT, intel_ich_gpio32_raise}, + {0x1039, 0x0661, 0x1043, 0x8113, 0x1039, 0x0003, 0, 0, "^P4S800-MX$", NULL, NULL, "ASUS", "P4S800-MX", 512, OK, w836xx_memw_enable_2e}, {0x10B9, 0x1541, 0, 0, 0x10B9, 0x1533, 0, 0, "^P5A$", "asus", "p5a", "ASUS", "P5A", 0, OK, board_asus_p5a}, {0x10DE, 0x0030, 0x1043, 0x818a, 0x8086, 0x100E, 0x1043, 0x80EE, NULL, NULL, NULL, "ASUS", "P5ND2-SLI Deluxe", 0, OK, nvidia_mcp_gpio10_raise}, {0x8086, 0x24dd, 0x1043, 0x80a6, 0x8086, 0x2570, 0x1043, 0x8157, NULL, NULL, NULL, "ASUS", "P5PE-VM", 0, OK, intel_ich_gpio21_raise}, Signed-off-by: David Borg <borg.db@gmail.com> On 28 July 2010 03:06, David Borg <borg.db@gmail.com> wrote: > > Updated the patch to remove anything related to chip (un)locking, as there is no way to unlock the superio except by a cold reset. > > Logs for the different flashrom runs and the outputs of lspci -nnvvvxxx and superiotool -deV are also attached. > > w836xx_memw_enable will work for this board, however i'd still like to see the function corrected for completeness sake. I haven't yet found a datasheet for a superio in the w83627 family where the function is correct, and the supported superio's all work with sio_mask(port, 0x24, 0x28, 0x38); Perhaps it should be fixed in a separate patch? > > Regards, > David > > On 1 July 2010 11:50, David Borg <borg.db@gmail.com> wrote: >> >> Patch to add support for the Asus P4S800-MX motherboard and SIS 963 >> chipset. Invalidates previous patch: [PATCH] add support for SIS963 >> >> If anyone has the output of superiotool -deV for the following working >> boards, please forward them, so I can merge the functions >> w836xx_unlock_memw_enable_2e and w836xx_memw_enable_2e, and maybe fix >> the function w836xx_memw_enable which I believe has a typo, such that >> sio_mask(port, 0x24, 0x28, 0x28); >> becomes : sio_mask(port, 0x24, 0x28, 0x38); >> >> Motherboards: >> Albatron - PM266A Pro >> ASUS - A7V8X-MX SE >> EPoX - EP-8K5A2 >> Shuttle - AK31 >> Tyan - S2498 (Tomcat K7M) >> Termtek - TK-3370 (Rev:2.5B) >> MSI - MS-6590 (KT4 Ultra) >> MSI - MS-6712 (KT4V) >> MSI - MS-7005 (651M-L) >> >> Signed-off-by: David Borg <borg.db@gmail.com> >> >> Regards, >> David > > > > -- > David Borg -- David Borg