Patchwork overzealous CONFIG_-prefixes

login
register
about
Submitter Patrick Georgi
Date 2009-08-26 17:18:08
Message ID <1251307088.12206.4.camel@tetris>
Download mbox | patch
Permalink /patch/198/
State Accepted
Headers show

Comments

Patrick Georgi - 2009-08-26 17:18:08
Hi,

attached patch removes a couple of CONFIG_ prefixes that shouldn't have
happened.


Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Carl-Daniel Hailfinger - 2009-08-26 17:24:36
On 26.08.2009 19:18, Patrick Georgi wrote:
> attached patch removes a couple of CONFIG_ prefixes that shouldn't have
> happened.
>
> Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
>   
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

Regards,
Carl-Daniel

Patch

Index: src/southbridge/amd/sb600/sb600_early_setup.c
===================================================================
--- src/southbridge/amd/sb600/sb600_early_setup.c	(Revision 4582)
+++ src/southbridge/amd/sb600/sb600_early_setup.c	(Arbeitskopie)
@@ -430,7 +430,7 @@ 
 
 	/*CIM set this register; but I didn't find its description in RPR.
 	On DBM690T platform, I didn't find different between set and skip this register.
-	But on Filbert platform, the CONFIG_DEBUG message from serial port on Peanut board can't be displayed
+	But on Filbert platform, the DEBUG message from serial port on Peanut board can't be displayed
 	after the bit0 of this register is set.
 	pci_write_config8(dev, 0x04, 0x21);
 	*/
Index: src/northbridge/amd/amdfam10/amdfam10_acpi.c
===================================================================
--- src/northbridge/amd/amdfam10/amdfam10_acpi.c	(Revision 4582)
+++ src/northbridge/amd/amdfam10/amdfam10_acpi.c	(Arbeitskopie)
@@ -190,7 +190,7 @@ 
 	u8 *CBST;
 	u8 *CBBX;
 	u8 *CBS2;
-	u8 *CONFIG_CBB2;
+	u8 *CBB2;
 
 
 	int i;
@@ -208,7 +208,7 @@ 
 	HCDN = ssdt+0x57a; //+5 will be next HCDN
 	CBBX = ssdt+0x61f; //
 	CBST = ssdt+0x626;
-	CONFIG_CBB2 = ssdt+0x62d; //
+	CBB2 = ssdt+0x62d; //
 	CBS2 = ssdt+0x634;
 
 	for(i=0;i<HC_NUMS;i++) {
@@ -260,10 +260,10 @@ 
 
 	if((CONFIG_CBB == 0xff) && (sysconf.nodes>32)) {
 		 *CBS2 = 0x0f;
-		 *CONFIG_CBB2 = (u8)(CONFIG_CBB-1);
+		 *CBB2 = (u8)(CONFIG_CBB-1);
 	} else {
 		*CBS2 = 0x00;
-		*CONFIG_CBB2 = 0x00;
+		*CBB2 = 0x00;
 	}
 
 }
Index: src/northbridge/ibm/cpc710/cpc710_pci.c
===================================================================
--- src/northbridge/ibm/cpc710/cpc710_pci.c	(Revision 4582)
+++ src/northbridge/ibm/cpc710/cpc710_pci.c	(Arbeitskopie)
@@ -45,7 +45,7 @@ 
 	setCPC710_PCI32(CPC710_PCIL0_MSIZE,  CPC710_PCI32_MEM_SIZE);
 	setCPC710_PCI32(CPC710_PCIL0_IOSIZE, CPC710_PCI32_IO_SIZE);
 	setCPC710_PCI32(CPC710_PCIL0_SMBAR,  CPC710_PCI32_MEM_BASE);
-	setCPC710_PCI32(CPC710_PCIL0_SIBAR,  CPC710_PCI32CONFIG_IO_BASE);
+	setCPC710_PCI32(CPC710_PCIL0_SIBAR,  CPC710_PCI32_IO_BASE);
 	setCPC710_PCI32(CPC710_PCIL0_CTLRW,  0x00000000);
 	setCPC710_PCI32(CPC710_PCIL0_PSSIZE, 0x00000080);
 	setCPC710_PCI32(CPC710_PCIL0_BARPS,  0x00000000);
@@ -94,7 +94,7 @@ 
 	setCPC710_PCI64(CPC710_PCIL0_MSIZE,  CPC710_PCI64_MEM_SIZE);
 	setCPC710_PCI64(CPC710_PCIL0_IOSIZE, CPC710_PCI64_IO_SIZE);
 	setCPC710_PCI64(CPC710_PCIL0_SMBAR,  CPC710_PCI64_MEM_BASE);
-	setCPC710_PCI64(CPC710_PCIL0_SIBAR,  CPC710_PCI64CONFIG_IO_BASE);
+	setCPC710_PCI64(CPC710_PCIL0_SIBAR,  CPC710_PCI64_IO_BASE);
 	setCPC710_PCI64(CPC710_PCIL0_CTLRW,  0x02000000);
 	setCPC710_PCI64(CPC710_PCIL0_PSSIZE, 0x00000080);
 
Index: src/northbridge/ibm/cpc710/cpc710_pci.h
===================================================================
--- src/northbridge/ibm/cpc710/cpc710_pci.h	(Revision 4582)
+++ src/northbridge/ibm/cpc710/cpc710_pci.h	(Arbeitskopie)
@@ -28,13 +28,13 @@ 
 #define CPC710_PCI32_MEM_SIZE		0xf8000000
 #define CPC710_PCI32_MEM_BASE		0xc0000000
 #define CPC710_PCI32_IO_SIZE		0xf8000000
-#define CPC710_PCI32CONFIG_IO_BASE		0x80000000
+#define CPC710_PCI32_IO_BASE		0x80000000
 
 //#define CPC710_PCI64_CONFIG		0xff400000
 //#define CPC710_PCI64_MEM_SIZE		0xf8000000
 //#define CPC710_PCI64_MEM_BASE		0xc8000000
 //#define CPC710_PCI64_IO_SIZE		0xf8000000
-//#define CPC710_PCI64CONFIG_IO_BASE		0x88000000
+//#define CPC710_PCI64_IO_BASE		0x88000000
 
 #define CPC710_PCIL0_PSEA		0xf6110
 #define CPC710_PCIL0_PCIDG		0xf6120
Index: src/drivers/i2c/adm1026/adm1026.c
===================================================================
--- src/drivers/i2c/adm1026/adm1026.c	(Revision 4582)
+++ src/drivers/i2c/adm1026/adm1026.c	(Arbeitskopie)
@@ -17,7 +17,7 @@ 
 #define CFG1_THERM_HOT   0x10
 #define CFT1_DAC_AFC     0x20
 #define CFG1_PWM_AFC     0x40
-#define CFG1CONFIG_RESET       0x80
+#define CFG1_RESET       0x80
 #define ADM1026_REG_CONFIG2 0x01
 #define ADM1026_REG_CONFIG3 0x07
 
@@ -40,7 +40,7 @@ 
         int result;
         result = smbus_read_byte(dev, ADM1026_REG_CONFIG1);
 
-        result = (result | CFG1_MONITOR) & ~(CFG1_INT_CLEAR | CFG1CONFIG_RESET);
+        result = (result | CFG1_MONITOR) & ~(CFG1_INT_CLEAR | CFG1_RESET);
         result = smbus_write_byte(dev, ADM1026_REG_CONFIG1, result);
 
         result = smbus_read_byte(dev, ADM1026_REG_CONFIG1);