===================================================================
@@ -13,8 +13,6 @@
#include <cpu/x86/msr.h>
#include <cpu/x86/cache.h>
-/* put this here for now, we are not sure where it belongs */
-
struct gliutable
{
unsigned long desc_name;
@@ -23,29 +21,29 @@
};
struct gliutable gliu0table[] = {
- {.desc_name=GLIU0_P2D_BM_0, .desc_type= BM,.hi= MSR_MC + 0x0,.lo= 0x0FFF80}, /* 0-7FFFF to MC */
- {.desc_name=GLIU0_P2D_BM_1, .desc_type= BM,.hi= MSR_MC + 0x0,.lo=(0x80 << 20) + 0x0FFFE0}, /* 80000-9ffff to Mc */
- {.desc_name=GLIU0_P2D_SC_0, .desc_type= SC_SHADOW,.hi= MSR_MC + 0x0,.lo= 0x03}, /* C0000-Fffff split to MC and PCI (sub decode) A0000-Bffff handled by SoftVideo */
- {.desc_name=GLIU0_P2D_R_0, .desc_type= R_SYSMEM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly. */
- {.desc_name=GLIU0_P2D_BMO_1, .desc_type= BMO_DMM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly. */
- {.desc_name=GLIU0_P2D_BMO_0, .desc_type= BMO_SMM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly. */
- {.desc_name=GLIU0_GLD_MSR_COH,.desc_type= OTHER,.hi= 0x0,.lo= GL0_CPU},
- {.desc_name=GL_END, .desc_type= GL_END,.hi= 0x0,.lo= 0x0},
+ {.desc_name=GLIU0_P2D_BM_0, .desc_type= BM,.hi= MSR_MC + 0x0,.lo= 0x0FFF80}, /* 0-7FFFF to MC */
+ {.desc_name=GLIU0_P2D_BM_1, .desc_type= BM,.hi= MSR_MC + 0x0,.lo=(0x80 << 20) + 0x0FFFE0}, /* 80000-9ffff to Mc */
+ {.desc_name=GLIU0_P2D_SC_0, .desc_type= SC_SHADOW,.hi= MSR_MC + 0x0,.lo= 0x03}, /* C0000-Fffff split to MC and PCI (sub decode) A0000-Bffff handled by SoftVideo */
+ {.desc_name=GLIU0_P2D_R_0, .desc_type= R_SYSMEM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly. */
+ {.desc_name=GLIU0_P2D_BMO_1, .desc_type= BMO_DMM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly. */
+ {.desc_name=GLIU0_P2D_BMO_0, .desc_type= BMO_SMM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly. */
+ {.desc_name=GLIU0_GLD_MSR_COH, .desc_type= OTHER,.hi= 0x0,.lo= GL0_CPU},
+ {.desc_name=GL_END, .desc_type= GL_END,.hi= 0x0,.lo= 0x0},
};
struct gliutable gliu1table[] = {
- {.desc_name=GLIU1_P2D_BM_0,.desc_type= BM,.hi= MSR_GL0 + 0x0,.lo= 0x0FFF80}, /* 0-7FFFF to MC */
- {.desc_name=GLIU1_P2D_BM_1,.desc_type= BM,.hi= MSR_GL0 + 0x0,.lo= (0x80 << 20) +0x0FFFE0}, /* 80000-9ffff to Mc */
- {.desc_name=GLIU1_P2D_SC_0,.desc_type= SC_SHADOW,.hi= MSR_GL0 + 0x0,.lo= 0x03}, /* C0000-Fffff split to MC and PCI (sub decode) */
- {.desc_name=GLIU1_P2D_R_0,.desc_type= R_SYSMEM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly. */
- {.desc_name=GLIU1_P2D_BM_4,.desc_type= BM_DMM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly. */
- {.desc_name=GLIU1_P2D_BM_3,.desc_type= BM_SMM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly. */
- {.desc_name=GLIU1_GLD_MSR_COH,.desc_type= OTHER,.hi= 0x0,.lo= GL1_GLIU0},
- {.desc_name=GLIU1_IOD_SC_0,.desc_type= SCIO,.hi= (GL1_GLCP << 29) + 0x0,.lo= 0x033000F0}, /* FooGlue FPU 0xF0 */
- {.desc_name=GL_END,.desc_type= GL_END,.hi= 0x0,.lo= 0x0},
+ {.desc_name=GLIU1_P2D_BM_0, .desc_type= BM,.hi= MSR_GL0 + 0x0,.lo= 0x0FFF80}, /* 0-7FFFF to MC */
+ {.desc_name=GLIU1_P2D_BM_1, .desc_type= BM,.hi= MSR_GL0 + 0x0,.lo= (0x80 << 20) + 0x0FFFE0},/* 80000-9ffff to Mc */
+ {.desc_name=GLIU1_P2D_SC_0, .desc_type= SC_SHADOW,.hi= MSR_GL0 + 0x0,.lo= 0x03}, /* C0000-Fffff split to MC and PCI (sub decode) */
+ {.desc_name=GLIU1_P2D_R_0, .desc_type= R_SYSMEM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly. */
+ {.desc_name=GLIU1_P2D_BM_4, .desc_type= BM_DMM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly. */
+ {.desc_name=GLIU1_P2D_BM_3, .desc_type= BM_SMM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly. */
+ {.desc_name=GLIU1_GLD_MSR_COH, .desc_type= OTHER,.hi= 0x0,.lo= GL1_GLIU0},
+ {.desc_name=GLIU1_IOD_SC_0, .desc_type= SCIO,.hi= (GL1_GLCP << 29) + 0x0,.lo= 0x033000F0}, /* FooGlue FPU 0xF0 */
+ {.desc_name=GL_END, .desc_type= GL_END,.hi= 0x0,.lo= 0x0},
};
-struct gliutable *gliutables[] = {gliu0table, gliu1table, 0};
+struct gliutable *gliutables[] = { gliu0table, gliu1table, 0 };
struct msrinit
{
@@ -53,7 +51,7 @@
msr_t msr;
};
-struct msrinit ClockGatingDefault [] = {
+struct msrinit ClockGatingDefault[] = {
{GLIU0_GLD_MSR_PM, {.hi=0x00,.lo=0x0005}},
/* MC must stay off in SDR mode. It is turned on in CPUBug??? lotus #77.142 */
{MC_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}},
@@ -64,7 +62,7 @@
{GLCP_GLD_MSR_PM, {.hi=0x00,.lo=0x0015}},
{GLPCI_GLD_MSR_PM, {.hi=0x00,.lo=0x0015}},
{FG_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}}, /* Always on */
- {0xffffffff, {0xffffffff, 0xffffffff}},
+ {0xFFFFFFFF, {0xFFFFFFFF, 0xFFFFFFFF}},
};
/* All On */
@@ -78,7 +76,7 @@
{GLCP_GLD_MSR_PM, {.hi=0x00,.lo=0x0FFFFFFFF}},
{GLPCI_GLD_MSR_PM, {.hi=0x00,.lo=0x0FFFFFFFF}},
{FG_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}},
- {0xffffffff, {0xffffffff, 0xffffffff}},
+ {0xFFFFFFFF, {0xFFFFFFFF, 0xFFFFFFFF}},
};
/* Performance */
@@ -87,11 +85,11 @@
{GP_GLD_MSR_PM, {.hi=0x00,.lo=0x0001}},
{DF_GLD_MSR_PM, {.hi=0x00,.lo=0x0155}},
{GLCP_GLD_MSR_PM, {.hi=0x00,.lo=0x0015}},
- {0xffffffff, {0xffffffff, 0xffffffff}},
+ {0xFFFFFFFF, {0xFFFFFFFF, 0xFFFFFFFF}},
};
/* SET GeodeLink PRIORITY */
-struct msrinit GeodeLinkPriorityTable [] = {
+struct msrinit GeodeLinkPriorityTable[] = {
{CPU_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0220}}, /* CPU Priority. */
{DF_GLD_MSR_MASTER_CONF, {.hi=0x00,.lo=0x0000}}, /* DF Priority. */
{VG_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0720}}, /* VG Primary and Secondary Priority. */
@@ -99,7 +97,7 @@
{GLPCI_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0027}}, /* GLPCI Priority + PID */
{GLCP_GLD_MSR_CONF, {.hi=0x00,.lo=0x0001}}, /* GLCP Priority + PID */
{FG_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0622}}, /* FG PID */
- {0x0FFFFFFFF, {0x0FFFFFFFF, 0x0FFFFFFFF}}, /* END */
+ {0xFFFFFFFF, {0xFFFFFFFF, 0xFFFFFFFF}}, /* END */
};
/* do we have dmi or not? assume NO per AMD */
@@ -129,33 +127,30 @@
}
}
-/* NOTE: transcribed from assembly code. There is the usual redundant assembly nonsense in here.
- * CLEAN ME UP
- */
-/* yes, this duplicates later code, but it seems that is how they want it done. */
static void SysmemInit(struct gliutable *gl)
{
msr_t msr;
int sizembytes, sizebytes;
/* Figure out how much RAM is in the machine and alocate all to the
- * system. We will adjust for SMM and DMM now and Frame Buffer later.
+ * system. We will adjust for SMM now and Frame Buffer later.
*/
sizembytes = sizeram();
- printk(BIOS_DEBUG, "%s: enable for %dm bytes\n", __func__, sizembytes);
+ printk(BIOS_DEBUG, "%s: enable for %dMBytes\n", __func__, sizembytes);
sizebytes = sizembytes << 20;
- sizebytes -= SMM_SIZE*1024 +1;
+ sizebytes -= ((SMM_SIZE * 1024) + 1);
if (havedmi)
sizebytes -= DMM_SIZE * 1024 + 1;
+ /* 20 bit address The bottom 12 bits go into bits 20-31 in msr.lo
+ The top 8 bits go into 0-7 of msr.hi. */
sizebytes -= 1;
msr.hi = (gl->hi & 0xFFFFFF00) | (sizebytes >> 24);
- /* set up sizebytes to fit into msr.lo */
- sizebytes <<= 8; /* what? well, we want bits 23:12 in bits 31:20. */
- sizebytes &= 0xfff00000;
- sizebytes |= 0x100;
+ sizebytes <<= 8; /* move bits 23:12 in bits 31:20. */
+ sizebytes &= 0xFFF00000;
+ sizebytes |= 0x100; /* start at 1MB */
msr.lo = sizebytes;
wrmsr(gl->desc_name, msr); /* MSR - see table above */
msr = rdmsr(gl->desc_name);
@@ -216,10 +211,10 @@
static void SMMGL0Init(struct gliutable *gl)
{
msr_t msr;
- int sizebytes = sizeram()<<20;
+ int sizebytes = sizeram() << 20;
long offset;
- sizebytes -= SMM_SIZE*1024;
+ sizebytes -= (SMM_SIZE * 1024);
if (havedmi)
sizebytes -= DMM_SIZE * 1024;
@@ -231,10 +226,10 @@
offset >>= 12;
msr.hi = offset << 8;
- msr.hi |= SMM_OFFSET>>24;
+ msr.hi |= SMM_OFFSET >> 24;
msr.lo = SMM_OFFSET << 8;
- msr.lo |= ((~(SMM_SIZE*1024)+1)>>12)&0xfffff;
+ msr.lo |= ((~(SMM_SIZE * 1024) + 1) >> 12) & 0xFFFFF;
wrmsr(gl->desc_name, msr); /* MSR - See table above */
msr = rdmsr(gl->desc_name);
@@ -244,14 +239,14 @@
static void SMMGL1Init(struct gliutable *gl)
{
msr_t msr;
- printk(BIOS_DEBUG, "%s:\n", __func__ );
+ printk(BIOS_DEBUG, "%s:\n", __func__);
msr.hi = gl->hi;
/* I don't think this is needed */
- msr.hi &= 0xffffff00;
+ msr.hi &= 0xFFFFFF00;
msr.hi |= (SMM_OFFSET >> 24);
msr.lo = SMM_OFFSET << 8;
- msr.lo |= ((~(SMM_SIZE*1024)+1)>>12)&0xfffff;
+ msr.lo |= ((~(SMM_SIZE * 1024) + 1) >> 12) & 0xFFFFF;
wrmsr(gl->desc_name, msr); /* MSR - See table above */
msr = rdmsr(gl->desc_name);
@@ -260,8 +255,8 @@
static void GLIUInit(struct gliutable *gl)
{
- while (gl->desc_type != GL_END){
- switch(gl->desc_type){
+ while (gl->desc_type != GL_END) {
+ switch (gl->desc_type) {
default:
/* For Unknown types: Write then read MSR */
writeglmsr(gl);
@@ -277,15 +272,15 @@
DMMGL0Init(gl);
break;
- case BM_DMM : /* check for a DMM entry */
+ case BM_DMM: /* check for a DMM entry */
DMMGL1Init(gl);
break;
- case BMO_SMM : /* check for a SMM entry */
+ case BMO_SMM: /* check for a SMM entry */
SMMGL0Init(gl);
break;
- case BM_SMM : /* check for a SMM entry */
+ case BM_SMM: /* check for a SMM entry */
SMMGL1Init(gl);
break;
}
@@ -311,13 +306,13 @@
/* R0 - GLPCI settings for Conventional Memory space. */
msr.hi = (0x09F000 >> 12) << GLPCI_RC_UPPER_TOP_SHIFT; /* 640 */
msr.lo = 0; /* 0 */
- msr.lo |= GLPCI_RC_LOWER_EN_SET+ GLPCI_RC_LOWER_PF_SET + GLPCI_RC_LOWER_WC_SET;
+ msr.lo |= GLPCI_RC_LOWER_EN_SET + GLPCI_RC_LOWER_PF_SET + GLPCI_RC_LOWER_WC_SET;
msrnum = GLPCI_RC0;
wrmsr(msrnum, msr);
/* R1 - GLPCI settings for SysMem space. */
/* Get systop from GLIU0 SYSTOP Descriptor */
- for(i = 0; gliu0table[i].desc_name != GL_END; i++) {
+ for (i = 0; gliu0table[i].desc_name != GL_END; i++) {
if (gliu0table[i].desc_type == R_SYSMEM) {
gl = &gliu0table[i];
break;
@@ -328,38 +323,38 @@
msrnum = gl->desc_name;
msr = rdmsr(msrnum);
/* example R_SYSMEM value: 20:00:00:0f:fb:f0:01:00
- * translates to a base of 0x00100000 and top of 0xffbf0000
- * base of 1M and top of around 256M
+ * translates to a base of 0x00100000 and top of 0xffbf0000
+ * base of 1M and top of around 256M
*/
/* we have to create a page-aligned (4KB page) address for base and top
* so we need a high page aligned addresss (pah) and low page aligned address (pal)
* pah is from msr.hi << 12 | msr.low >> 20. pal is msr.lo << 12
*/
printk(BIOS_DEBUG, "GLPCI r1: system msr.lo 0x%08x msr.hi 0x%08x\n", msr.lo, msr.hi);
- pah = ((msr.hi &0xff) << 12) | ((msr.lo >> 20) & 0xfff);
+ pah = ((msr.hi & 0xFF) << 12) | ((msr.lo >> 20) & 0xFFF);
/* we have the page address. Now make it a page-aligned address */
pah <<= 12;
pal = msr.lo << 12;
- msr.hi = pah;
- msr.lo = pal;
+ msr.hi = pah;
+ msr.lo = pal;
msr.lo |= GLPCI_RC_LOWER_EN_SET | GLPCI_RC_LOWER_PF_SET | GLPCI_RC_LOWER_WC_SET;
- printk(BIOS_DEBUG, "GLPCI r1: system msr.lo 0x%08x msr.hi 0x%08x\n", msr.lo, msr.hi);
+ printk(BIOS_DEBUG, "GLPCI R1: system msr.lo 0x%08x msr.hi 0x%08x\n", msr.lo, msr.hi);
msrnum = GLPCI_RC1;
wrmsr(msrnum, msr);
}
/* R2 - GLPCI settings for SMM space. */
- msr.hi = ((SMM_OFFSET+(SMM_SIZE*1024-1)) >> 12) << GLPCI_RC_UPPER_TOP_SHIFT;
- msr.lo = (SMM_OFFSET >> 12) << GLPCI_RC_LOWER_BASE_SHIFT;
+ msr.hi = ((SMM_OFFSET + (SMM_SIZE * 1024 - 1)) >> 12) << GLPCI_RC_UPPER_TOP_SHIFT;
+ msr.lo = (SMM_OFFSET >> 12) << GLPCI_RC_LOWER_BASE_SHIFT;
msr.lo |= GLPCI_RC_LOWER_EN_SET | GLPCI_RC_LOWER_PF_SET;
msrnum = GLPCI_RC2;
wrmsr(msrnum, msr);
/* this is done elsewhere already, but it does no harm to do it more than once */
- /* write serialize memory hole to PCI. Need to to unWS when something is shadowed regardless of cachablility. */
- msr.lo = 0x021212121; /* cache disabled and write serialized */
- msr.hi = 0x021212121; /* cache disabled and write serialized */
+ /* write serialize memory hole to PCI. Need to unWS when something is shadowed regardless of cachablility. */
+ msr.lo = 0x021212121; /* cache disabled and write serialized */
+ msr.hi = 0x021212121; /* cache disabled and write serialized */
msrnum = CPU_RCONF_A0_BF;
wrmsr(msrnum, msr);
@@ -372,80 +367,82 @@
/* Set Non-Cacheable Read Only for NorthBound Transactions to Memory. The Enable bit is handled in the Shadow setup. */
msrnum = GLPCI_A0_BF;
- msr.hi = 0x35353535;
- msr.lo = 0x35353535;
+ msr.hi = 0x35353535;
+ msr.lo = 0x35353535;
wrmsr(msrnum, msr);
msrnum = GLPCI_C0_DF;
- msr.hi = 0x35353535;
- msr.lo = 0x35353535;
+ msr.hi = 0x35353535;
+ msr.lo = 0x35353535;
wrmsr(msrnum, msr);
msrnum = GLPCI_E0_FF;
- msr.hi = 0x35353535;
- msr.lo = 0x35353535;
+ msr.hi = 0x35353535;
+ msr.lo = 0x35353535;
wrmsr(msrnum, msr);
/* Set WSREQ */
msrnum = CPU_DM_CONFIG0;
msr = rdmsr(msrnum);
- msr.hi &= ~ (7 << DM_CONFIG0_UPPER_WSREQ_SHIFT);
+ msr.hi &= ~(7 << DM_CONFIG0_UPPER_WSREQ_SHIFT);
msr.hi |= 2 << DM_CONFIG0_UPPER_WSREQ_SHIFT ; /* reduce to 1 for safe mode. */
wrmsr(msrnum, msr);
/* we are ignoring the 5530 case for now, and perhaps forever. */
- /* 5535 NB Init */
+ /* 553X NB Init */
+
+ /* Arbiter setup */
msrnum = GLPCI_ARB;
msr = rdmsr(msrnum);
- msr.hi |= GLPCI_ARB_UPPER_PRE0_SET | GLPCI_ARB_UPPER_PRE1_SET;
- msr.lo |= GLPCI_ARB_LOWER_IIE_SET;
+ msr.hi |= GLPCI_ARB_UPPER_PRE0_SET | GLPCI_ARB_UPPER_PRE1_SET;
+ msr.lo |= GLPCI_ARB_LOWER_IIE_SET;
wrmsr(msrnum, msr);
msrnum = GLPCI_CTRL;
msr = rdmsr(msrnum);
- msr.lo |= GLPCI_CTRL_LOWER_ME_SET | GLPCI_CTRL_LOWER_OWC_SET | GLPCI_CTRL_LOWER_PCD_SET; /* (Out will be disabled in CPUBUG649 for < 2.0 parts .) */
- msr.lo |= GLPCI_CTRL_LOWER_LDE_SET;
+ msr.lo |= GLPCI_CTRL_LOWER_ME_SET | GLPCI_CTRL_LOWER_OWC_SET | GLPCI_CTRL_LOWER_PCD_SET; /* (Out will be disabled in CPUBUG649 for < 2.0 parts .) */
+ msr.lo |= GLPCI_CTRL_LOWER_LDE_SET;
- msr.lo &= ~ (0x03 << GLPCI_CTRL_LOWER_IRFC_SHIFT);
- msr.lo |= 0x02 << GLPCI_CTRL_LOWER_IRFC_SHIFT;
+ msr.lo &= ~(0x03 << GLPCI_CTRL_LOWER_IRFC_SHIFT);
+ msr.lo |= 0x02 << GLPCI_CTRL_LOWER_IRFC_SHIFT;
- msr.lo &= ~ (0x07 << GLPCI_CTRL_LOWER_IRFT_SHIFT);
- msr.lo |= 0x06 << GLPCI_CTRL_LOWER_IRFT_SHIFT;
+ msr.lo &= ~(0x07 << GLPCI_CTRL_LOWER_IRFT_SHIFT);
+ msr.lo |= 0x06 << GLPCI_CTRL_LOWER_IRFT_SHIFT;
- msr.hi &= ~ (0x0f << GLPCI_CTRL_UPPER_FTH_SHIFT);
- msr.hi |= 0x0F << GLPCI_CTRL_UPPER_FTH_SHIFT;
+ msr.hi &= ~(0x0F << GLPCI_CTRL_UPPER_FTH_SHIFT);
+ msr.hi |= 0x0F << GLPCI_CTRL_UPPER_FTH_SHIFT;
- msr.hi &= ~ (0x0f << GLPCI_CTRL_UPPER_RTH_SHIFT);
- msr.hi |= 0x0F << GLPCI_CTRL_UPPER_RTH_SHIFT;
+ msr.hi &= ~(0x0F << GLPCI_CTRL_UPPER_RTH_SHIFT);
+ msr.hi |= 0x0F << GLPCI_CTRL_UPPER_RTH_SHIFT;
- msr.hi &= ~ (0x0f << GLPCI_CTRL_UPPER_SBRTH_SHIFT);
- msr.hi |= 0x0F << GLPCI_CTRL_UPPER_SBRTH_SHIFT;
+ msr.hi &= ~(0x0F << GLPCI_CTRL_UPPER_SBRTH_SHIFT);
+ msr.hi |= 0x0F << GLPCI_CTRL_UPPER_SBRTH_SHIFT;
- msr.hi &= ~ (0x03 << GLPCI_CTRL_UPPER_WTO_SHIFT);
+ msr.hi &= ~(0x03 << GLPCI_CTRL_UPPER_WTO_SHIFT);
msr.hi |= 0x06 << GLPCI_CTRL_UPPER_WTO_SHIFT;
- msr.hi &= ~ (0x03 << GLPCI_CTRL_UPPER_ILTO_SHIFT);
+ msr.hi &= ~(0x03 << GLPCI_CTRL_UPPER_ILTO_SHIFT);
msr.hi |= 0x00 << GLPCI_CTRL_UPPER_ILTO_SHIFT;
wrmsr(msrnum, msr);
/* Set GLPCI Latency Timer. */
msrnum = GLPCI_CTRL;
msr = rdmsr(msrnum);
- msr.hi |= 0x1F << GLPCI_CTRL_UPPER_LAT_SHIFT; /* Change once 1.x is gone. */
+ msr.hi |= 0x1F << GLPCI_CTRL_UPPER_LAT_SHIFT; /* Change once 1.x is gone. */
wrmsr(msrnum, msr);
/* GLPCI_SPARE */
msrnum = GLPCI_SPARE;
msr = rdmsr(msrnum);
- msr.lo &= ~ 0x7;
- msr.lo |= GLPCI_SPARE_LOWER_AILTO_SET | GLPCI_SPARE_LOWER_PPD_SET | GLPCI_SPARE_LOWER_PPC_SET | GLPCI_SPARE_LOWER_MPC_SET | GLPCI_SPARE_LOWER_NSE_SET | GLPCI_SPARE_LOWER_SUPO_SET;
+ msr.lo &= ~0x7;
+ msr.lo |= GLPCI_SPARE_LOWER_AILTO_SET | GLPCI_SPARE_LOWER_PPD_SET | GLPCI_SPARE_LOWER_PPC_SET | GLPCI_SPARE_LOWER_MPC_SET | GLPCI_SPARE_LOWER_NSE_SET | GLPCI_SPARE_LOWER_SUPO_SET;
wrmsr(msrnum, msr);
}
/* Enable Clock Gating. */
-static void ClockGatingInit (void)
+static void ClockGatingInit(void)
{
msr_t msr;
struct msrinit *gating = ClockGatingDefault;
@@ -471,7 +468,7 @@
lea si, ClockGatingPerformance
#endif
- for(i = 0; gating->msrnum != 0xffffffff; i++) {
+ for (i = 0; gating->msrnum != 0xFFFFFFFF; i++) {
msr = rdmsr(gating->msrnum);
printk(BIOS_DEBUG, "%s: MSR 0x%08lx is 0x%08x:0x%08x\n", __func__, gating->msrnum, msr.hi, msr.lo);
msr.hi |= gating->msr.hi;
@@ -479,26 +476,27 @@
printk(BIOS_DEBUG, "%s: MSR 0x%08lx will be set to 0x%08x:0x%08x\n", __func__,
gating->msrnum, msr.hi, msr.lo);
wrmsr(gating->msrnum, msr); /* MSR - See the table above */
- gating +=1;
+ gating += 1;
}
}
static void GeodeLinkPriority(void)
{
msr_t msr;
+
struct msrinit *prio = GeodeLinkPriorityTable;
int i;
- for(i = 0; prio->msrnum != 0xffffffff; i++) {
+ for (i = 0; prio->msrnum != 0xFFFFFFFF; i++) {
msr = rdmsr(prio->msrnum);
printk(BIOS_DEBUG, "%s: MSR 0x%08lx is 0x%08x:0x%08x\n", __func__, prio->msrnum, msr.hi, msr.lo);
msr.hi |= prio->msr.hi;
- msr.lo &= ~0xfff;
+ msr.lo &= ~0xFFF;
msr.lo |= prio->msr.lo;
printk(BIOS_DEBUG, "%s: MSR 0x%08lx will be set to 0x%08x:0x%08x\n", __func__,
prio->msrnum, msr.hi, msr.lo);
wrmsr(prio->msrnum, msr); /* MSR - See the table above */
- prio +=1;
+ prio += 1;
}
}
@@ -510,6 +508,7 @@
static uint64_t getShadow(void)
{
msr_t msr;
+
msr = rdmsr(GLIU0_P2D_SC_0);
return ( ( (uint64_t) msr.hi ) << 32 ) | msr.lo;
}
@@ -538,7 +537,7 @@
}
/* load up C000 settings in eax. */
- for ( ; bit; bit--) {
+ for (; bit; bit--) {
msr.lo <<= 8;
msr.lo |= 1; /* cache disable PCI/Shadow memory */
if (shadowByte && (1 << bit))
@@ -558,7 +557,7 @@
}
/* load up E000 settings in eax. */
- for ( ; bit; bit--) {
+ for (; bit; bit--) {
msr.lo <<= 8;
msr.lo |= 1; /* cache disable PCI/Shadow memory */
if (shadowByte && (1 << bit))
@@ -579,7 +578,7 @@
/* Set the Enable Register. */
msr = rdmsr(GLPCI_REN);
msr.lo &= 0xFFFF00FF;
- msr.lo |= ( (shadowLo & 0xFFFF0000) >> 8);
+ msr.lo |= ((shadowLo & 0xFFFF0000) >> 8);
wrmsr(GLPCI_REN, msr);
}
@@ -591,7 +590,7 @@
{
int i;
msr_t msr;
- struct gliutable* pTable;
+ struct gliutable *pTable;
uint32_t shadowLo, shadowHi;
shadowLo = (uint32_t) shadowSettings;
@@ -600,7 +599,7 @@
setShadowRCONF(shadowHi, shadowLo);
setShadowGLPCI(shadowHi, shadowLo);
- for(i = 0; gliutables[i]; i++) {
+ for (i = 0; gliutables[i]; i++) {
for (pTable = gliutables[i]; pTable->desc_type != GL_END; pTable++) {
if (pTable->desc_type == SC_SHADOW) {
@@ -615,7 +614,6 @@
}
}
-/* Set up a stack for ease of further testing. */
static void shadowRom(void)
{
uint64_t shadowSettings = getShadow();
@@ -646,7 +644,7 @@
uint8_t SysMemCacheProp;
/* Locate SYSMEM entry in GLIU0table */
- for(i = 0; gliu0table[i].desc_name != GL_END; i++) {
+ for (i = 0; gliu0table[i].desc_name != GL_END; i++) {
if (gliu0table[i].desc_type == R_SYSMEM) {
gl = &gliu0table[i];
break;
@@ -658,7 +656,6 @@
}
/* sysdescfound: */
- /* found the descriptor... get its contents */
msr = rdmsr(gl->desc_name);
/* 20 bit address - The bottom 12 bits go into bits 20-31 in eax, the
@@ -669,10 +666,10 @@
msr.lo <<= RCONF_DEFAULT_LOWER_SYSTOP_SHIFT; /* 8 */
/* Set Default SYSMEM region properties */
- msr.lo &= ~SYSMEM_RCONF_WRITETHROUGH; /* 8 (or ~8) */
+ msr.lo &= ~SYSMEM_RCONF_WRITETHROUGH; /* NOT writethrough == writeback 8 (or ~8) */
/* Set PCI space cache properties */
- msr.hi = (DEVRC_RCONF_DEFAULT >> 4); /* only need the bottom bits and lets clean the rest of edx */
+ msr.hi = (DEVRC_RCONF_DEFAULT >> 4); /* setting is split betwwen hi and lo... */
msr.lo |= (DEVRC_RCONF_DEFAULT << 28);
/* Set the ROMBASE. This is usually FFFC0000h */
@@ -684,7 +681,7 @@
/* now program RCONF_DEFAULT */
wrmsr(CPU_RCONF_DEFAULT, msr);
- /* RCONF_BYPASS: Cache tablewalk properties and SMM/DMM header access properties. */
+ /* RCONF_BYPASS: Cache tablewalk properties and SMM header access properties. */
/* Set to match system memory cache properties. */
msr = rdmsr(CPU_RCONF_DEFAULT);
SysMemCacheProp = (uint8_t) (msr.lo & 0xFF);
@@ -724,7 +721,7 @@
int i;
printk(BIOS_DEBUG, "Enter %s\n", __func__);
- for(i = 0; gliutables[i]; i++)
+ for (i = 0; gliutables[i]; i++)
GLIUInit(gliutables[i]);
GeodeLinkPriority();
@@ -749,7 +746,6 @@
GLPCIInit();
ClockGatingInit();
__asm__("FINIT\n");
- /* CPUBugsFix -- called elsewhere */
printk(BIOS_DEBUG, "Exit %s\n", __func__);
}
For gx2/northbridgeinit.c -some white space fixes -some codingstyle fixes -some comment fixes. Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Thanks, Nils.