commit a179085a0dbfa9529ff7b8f9c108dbed3471a0e9
Author: Sven Schnelle <svens@stackframe.org>
Date: Sat Jan 8 22:37:18 2011 +0100
Initial Lenovo X60 port
@@ -1,6 +1,7 @@
ramstage-y += socket_mPGA479M.c
subdirs-y += ../model_69x
subdirs-y += ../model_6dx
+subdirs-y += ../model_6ex
subdirs-y += ../model_f2x
subdirs-y += ../../x86/tsc
subdirs-y += ../../x86/mtrr
@@ -9,5 +10,5 @@ subdirs-y += ../../x86/cache
subdirs-y += ../../x86/smm
subdirs-y += ../microcode
subdirs-y += ../hyperthreading
+subdirs-y += ../speedstep
-cpu_incs += $(src)/cpu/intel/car/cache_as_ram.inc
@@ -54,6 +54,8 @@ config VENDOR_IBASE
bool "iBase"
config VENDOR_IBM
bool "IBM"
+config VENDOR_LENOVO
+ bool "Lenovo"
config VENDOR_IEI
bool "IEI"
config VENDOR_INTEL
@@ -147,6 +149,7 @@ source "src/mainboard/iwill/Kconfig"
source "src/mainboard/jetway/Kconfig"
source "src/mainboard/kontron/Kconfig"
source "src/mainboard/lanner/Kconfig"
+source "src/mainboard/lenovo/Kconfig"
source "src/mainboard/lippert/Kconfig"
source "src/mainboard/mitac/Kconfig"
source "src/mainboard/msi/Kconfig"
new file mode 100644
@@ -0,0 +1,17 @@
+if VENDOR_LENOVO
+
+choice
+ prompt "Mainboard model"
+
+config BOARD_LENOVO_X60
+ bool "Thinkpad X60"
+
+endchoice
+
+source "src/mainboard/lenovo/x60/Kconfig"
+
+config MAINBOARD_VENDOR
+ string
+ default "Lenovo"
+
+endif # VENDOR_LENOVO
new file mode 100644
@@ -0,0 +1,53 @@
+if BOARD_LENOVO_X60
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select ARCH_X86
+ select CPU_INTEL_CORE
+ select CPU_INTEL_SOCKET_MPGA479M
+ select NORTHBRIDGE_INTEL_I945GM
+ select SOUTHBRIDGE_INTEL_I82801GX
+ select BOARD_HAS_FADT
+ select HAVE_OPTION_TABLE
+ select HAVE_PIRQ_TABLE
+ select HAVE_MP_TABLE
+ select MMCONF_SUPPORT
+ select HAVE_SMI_HANDLER
+ select HAVE_ACPI_TABLES
+# select HAVE_ACPI_RESUME
+ select BOARD_ROMSIZE_KB_1024
+ select CHANNEL_XOR_RANDOMIZATION
+
+config MAINBOARD_DIR
+ string
+ default lenovo/x60
+
+config DCACHE_RAM_BASE
+ hex
+ default 0xffdf8000
+
+config DCACHE_RAM_SIZE
+ hex
+ default 0x8000
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "X60"
+
+config MMCONF_BASE_ADDRESS
+ hex
+ default 0xf0000000
+
+config IRQ_SLOT_COUNT
+ int
+ default 18
+
+config MAX_CPUS
+ int
+ default 2
+
+config MAX_PHYSICAL_CPUS
+ int
+ default 1
+
+endif
new file mode 100644
@@ -0,0 +1,20 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (c) 2011 Sven Schnelle <svens@stackframe.org>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+smm-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.c
new file mode 100644
@@ -0,0 +1,364 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <string.h>
+#include <console/console.h>
+#include <arch/io.h>
+#include <arch/ioapic.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/smp/mpspec.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include "dmi.h"
+
+extern const unsigned char AmlCode[];
+#if CONFIG_HAVE_ACPI_SLIC
+unsigned long acpi_create_slic(unsigned long current);
+#endif
+
+#define OLD_ACPI 0
+#if OLD_ACPI
+static void acpi_create_gnvs(global_nvs_t *gnvs)
+{
+ memset (gnvs, 0, sizeof(global_nvs_t));
+
+ gnvs->LIDS = 1;
+ gnvs->PWRS = 1;
+
+ gnvs->ACTT = 0x37;
+ gnvs->PSVT = 0x4f;
+
+ gnvs->TC1V = 0x00;
+ gnvs->TC2V = 0x0a;
+ gnvs->TSPV = 0x02;
+
+ gnvs->CRTT = 0x77;
+
+ gnvs->B0SC = 0x54;
+ gnvs->APIC = 0x01;
+ gnvs->MPEN = 0x01;
+
+ gnvs->PPCM = 0x02;
+ gnvs->PCP0 = 0xbf;
+ gnvs->PCP1 = 0xbf;
+
+ gnvs->CMAP = 0x01;
+ gnvs->CMBP = 0x01;
+ gnvs->LT0 = 0x01;
+ gnvs->FDCP = 0x01;
+ gnvs->CMCP = 0x01;
+ gnvs->CMDP = 0x01;
+ gnvs->P2M = 0x02;
+
+ gnvs->IGDS = 0x01;
+
+ gnvs->CADL = 0x09;
+ gnvs->PADL = 0x09;
+
+ gnvs->NDID = 3;
+ gnvs->DID1 = 0x80000100;
+ gnvs->DID2 = 0x80000240;
+ gnvs->DID3 = 0x80000410;
+ gnvs->DID4 = 0x80000410;
+ gnvs->DID5 = 0x00000005;
+
+ gnvs->ALAF = 0x64;
+ gnvs->LLOW = 0x2c;
+ gnvs->LHIH = 0x01;
+
+ // tolud = pci_read_config32(dev_find_slot(0, PCI_DEVFN(2, 0)), 0x5c);
+ // oemb->topm = tolud;
+}
+#endif
+
+#include "southbridge/intel/i82801gx/nvs.h"
+static void acpi_create_gnvs(global_nvs_t *gnvs)
+{
+ memset((void *)gnvs, 0, sizeof(*gnvs));
+ gnvs->apic = 1;
+ gnvs->mpen = 1; /* Enable Multi Processing */
+
+ /* Enable both COM ports */
+ gnvs->cmap = 0x01;
+ gnvs->cmbp = 0x01;
+
+ /* IGD Displays */
+ gnvs->ndid = 3;
+ gnvs->did[0] = 0x80000100;
+ gnvs->did[1] = 0x80000240;
+ gnvs->did[2] = 0x80000410;
+ gnvs->did[3] = 0x80000410;
+ gnvs->did[4] = 0x00000005;
+}
+
+static void acpi_create_intel_hpet(acpi_hpet_t * hpet)
+{
+#define HPET_ADDR 0xfed00000ULL
+ acpi_header_t *header = &(hpet->header);
+ acpi_addr_t *addr = &(hpet->addr);
+
+ memset((void *) hpet, 0, sizeof(acpi_hpet_t));
+
+ /* fill out header fields */
+ memcpy(header->signature, "HPET", 4);
+ memcpy(header->oem_id, OEM_ID, 6);
+ memcpy(header->oem_table_id, "COREBOOT", 8);
+ memcpy(header->asl_compiler_id, ASLC, 4);
+
+ header->length = sizeof(acpi_hpet_t);
+ header->revision = 1;
+
+ /* fill out HPET address */
+ addr->space_id = 0; /* Memory */
+ addr->bit_width = 64;
+ addr->bit_offset = 0;
+ addr->addrl = HPET_ADDR & 0xffffffff;
+ addr->addrh = HPET_ADDR >> 32;
+
+ hpet->id = 0x8086a201; /* Intel */
+ hpet->number = 0x00;
+ hpet->min_tick = 0x0080;
+
+ header->checksum =
+ acpi_checksum((void *) hpet, sizeof(acpi_hpet_t));
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ /* Local APICs */
+ current = acpi_create_madt_lapics(current);
+
+ /* IOAPIC */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+ 2, IO_APIC_ADDR, 0);
+
+ /* LAPIC_NMI */
+ current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)
+ current, 0,
+ MP_IRQ_POLARITY_HIGH |
+ MP_IRQ_TRIGGER_EDGE, 0x01);
+ current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)
+ current, 1, MP_IRQ_POLARITY_HIGH |
+ MP_IRQ_TRIGGER_EDGE, 0x01);
+
+ /* INT_SRC_OVR */
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_EDGE);
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_LEVEL);
+
+
+ return current;
+}
+
+unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id)
+{
+ generate_cpu_entries();
+ return (unsigned long) (acpigen_get_current());
+}
+
+unsigned long acpi_fill_slit(unsigned long current)
+{
+ // Not implemented
+ return current;
+}
+
+unsigned long acpi_fill_srat(unsigned long current)
+{
+ /* No NUMA, no SRAT */
+ return current;
+}
+
+void smm_setup_structures(void *gnvs, void *tcg, void *smi1);
+
+#define ALIGN_CURRENT current = ((current + 0x0f) & -0x10)
+unsigned long write_acpi_tables(unsigned long start)
+{
+ unsigned long current;
+ int i;
+ acpi_rsdp_t *rsdp;
+ acpi_rsdt_t *rsdt;
+ acpi_xsdt_t *xsdt;
+ acpi_hpet_t *hpet;
+ acpi_madt_t *madt;
+ acpi_mcfg_t *mcfg;
+ acpi_fadt_t *fadt;
+ acpi_facs_t *facs;
+#if CONFIG_HAVE_ACPI_SLIC
+ acpi_header_t *slic;
+#endif
+ acpi_header_t *ssdt;
+ acpi_header_t *dsdt;
+ void *gnvs;
+
+ current = start;
+
+ /* Align ACPI tables to 16byte */
+ ALIGN_CURRENT;
+
+ printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start);
+
+ /* We need at least an RSDP and an RSDT Table */
+ rsdp = (acpi_rsdp_t *) current;
+ current += sizeof(acpi_rsdp_t);
+ ALIGN_CURRENT;
+ rsdt = (acpi_rsdt_t *) current;
+ current += sizeof(acpi_rsdt_t);
+ ALIGN_CURRENT;
+ xsdt = (acpi_xsdt_t *) current;
+ current += sizeof(acpi_xsdt_t);
+ ALIGN_CURRENT;
+
+ /* clear all table memory */
+ memset((void *) start, 0, current - start);
+
+ acpi_write_rsdp(rsdp, rsdt, xsdt);
+ acpi_write_rsdt(rsdt);
+ acpi_write_xsdt(xsdt);
+
+ /*
+ * We explicitly add these tables later on:
+ */
+ printk(BIOS_DEBUG, "ACPI: * HPET\n");
+
+ hpet = (acpi_hpet_t *) current;
+ current += sizeof(acpi_hpet_t);
+ ALIGN_CURRENT;
+ acpi_create_intel_hpet(hpet);
+ acpi_add_table(rsdp, hpet);
+
+ /* If we want to use HPET Timers Linux wants an MADT */
+ printk(BIOS_DEBUG, "ACPI: * MADT\n");
+
+ madt = (acpi_madt_t *) current;
+ acpi_create_madt(madt);
+ current += madt->header.length;
+ ALIGN_CURRENT;
+ acpi_add_table(rsdp, madt);
+
+ printk(BIOS_DEBUG, "ACPI: * MCFG\n");
+ mcfg = (acpi_mcfg_t *) current;
+ acpi_create_mcfg(mcfg);
+ current += mcfg->header.length;
+ ALIGN_CURRENT;
+ acpi_add_table(rsdp, mcfg);
+
+ printk(BIOS_DEBUG, "ACPI: * FACS\n");
+ facs = (acpi_facs_t *) current;
+ current += sizeof(acpi_facs_t);
+ ALIGN_CURRENT;
+ acpi_create_facs(facs);
+
+ dsdt = (acpi_header_t *) current;
+ memcpy(dsdt, &AmlCode, sizeof(acpi_header_t));
+ current += dsdt->length;
+ memcpy(dsdt, &AmlCode, dsdt->length);
+
+ /* Fix up global NVS region for SMI handler. The GNVS region lives
+ * in the (high) table area. The low memory map looks like this:
+ *
+ * 0x00000000 - 0x000003ff Real Mode IVT
+ * 0x00000020 - 0x0000019c Low MP Table (XXX conflict?)
+ * 0x00000400 - 0x000004ff BDA (somewhat unused)
+ * 0x00000500 - 0x0000052f Moved GDT
+ * 0x00000530 - 0x00000b64 coreboot table
+ * 0x0007c000 - 0x0007dfff OS boot sector (unused?)
+ * 0x0007e000 - 0x0007ffff free to use (so no good for acpi+smi)
+ * 0x00080000 - 0x0009fbff usable ram
+ * 0x0009fc00 - 0x0009ffff EBDA (unused?)
+ * 0x000a0000 - 0x000bffff VGA memory
+ * 0x000c0000 - 0x000cffff VGA option rom
+ * 0x000d0000 - 0x000dffff free for other option roms?
+ * 0x000e0000 - 0x000fffff SeaBIOS? (conflict with low tables:)
+ * 0x000f0000 - 0x000f03ff PIRQ table
+ * 0x000f0400 - 0x000f66?? ACPI tables
+ * 0x000f66?? - 0x000f???? DMI tables
+ */
+
+ ALIGN_CURRENT;
+
+ /* Pack GNVS into the ACPI table area */
+ for (i=0; i < dsdt->length; i++) {
+ if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBABE) {
+ printk(BIOS_DEBUG, "ACPI: Patching up global NVS in DSDT at offset 0x%04x -> 0x%08x\n", i, (u32)current);
+ *(u32*)(((u32)dsdt) + i) = current; // 0x92 bytes
+ break;
+ }
+ }
+
+ /* And fill it */
+ acpi_create_gnvs((global_nvs_t *)current);
+
+ /* Keep pointer around */
+ gnvs = (void *)current;
+
+ current += 0x100;
+ ALIGN_CURRENT;
+
+ /* And tell SMI about it */
+ smm_setup_structures(gnvs, NULL, NULL);
+
+ /* We patched up the DSDT, so we need to recalculate the checksum */
+ dsdt->checksum = 0;
+ dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length);
+
+ printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt,
+ dsdt->length);
+
+#if CONFIG_HAVE_ACPI_SLIC
+ printk(BIOS_DEBUG, "ACPI: * SLIC\n");
+ slic = (acpi_header_t *)current;
+ current += acpi_create_slic(current);
+ ALIGN_CURRENT;
+ acpi_add_table(rsdp, slic);
+#endif
+
+ printk(BIOS_DEBUG, "ACPI: * FADT\n");
+ fadt = (acpi_fadt_t *) current;
+ current += sizeof(acpi_fadt_t);
+ ALIGN_CURRENT;
+
+ acpi_create_fadt(fadt, facs, dsdt);
+ acpi_add_table(rsdp, fadt);
+
+ printk(BIOS_DEBUG, "ACPI: * SSDT\n");
+ ssdt = (acpi_header_t *)current;
+ acpi_create_ssdt_generator(ssdt, "COREBOOT");
+ current += ssdt->length;
+ acpi_add_table(rsdp, ssdt);
+ ALIGN_CURRENT;
+
+ printk(BIOS_DEBUG, "current = %lx\n", current);
+
+ printk(BIOS_DEBUG, "ACPI: * DMI (Linux workaround)\n");
+ memcpy((void *)0xfff80, dmi_table, DMI_TABLE_SIZE);
+#if CONFIG_WRITE_HIGH_TABLES == 1
+ memcpy((void *)current, dmi_table, DMI_TABLE_SIZE);
+ current += DMI_TABLE_SIZE;
+ ALIGN_CURRENT;
+#endif
+
+ printk(BIOS_INFO, "ACPI: done.\n");
+
+ return current;
+}
new file mode 100644
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (c) 2011 Sven Schnelle <svens@stackframe.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_ops;
+struct mainboard_config {};
new file mode 100644
@@ -0,0 +1,145 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2007-2008 coresystems GmbH
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of
+# the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+# -----------------------------------------------------------------
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+# -----------------------------------------------------------------
+# Status Register A
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+# -----------------------------------------------------------------
+# Status Register B
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+# -----------------------------------------------------------------
+# Status Register C
+#96 4 r 0 status_c_rsvd
+#100 1 r 0 uf_flag
+#101 1 r 0 af_flag
+#102 1 r 0 pf_flag
+#103 1 r 0 irqf_flag
+# -----------------------------------------------------------------
+# Status Register D
+#104 7 r 0 status_d_rsvd
+#111 1 r 0 valid_cmos_ram
+# -----------------------------------------------------------------
+# Diagnostic Status Register
+#112 8 r 0 diag_rsvd1
+
+# -----------------------------------------------------------------
+0 120 r 0 reserved_memory
+#120 264 r 0 unused
+
+# -----------------------------------------------------------------
+# RTC_BOOT_BYTE (coreboot hardcoded)
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+388 4 r 0 reboot_bits
+#390 2 r 0 unused?
+
+# -----------------------------------------------------------------
+# coreboot config options: console
+392 3 e 5 baud_rate
+395 4 e 6 debug_level
+#399 1 r 0 unused
+
+# coreboot config options: cpu
+400 1 e 2 hyper_threading
+#401 7 r 0 unused
+
+# coreboot config options: southbridge
+408 1 e 1 nmi
+#409 2 e 7 power_on_after_fail
+#411 5 r 0 unused
+
+# coreboot config options: bootloader
+416 512 s 0 boot_devices
+928 8 h 0 boot_default
+#936 48 r 0 unused
+
+# coreboot config options: check sums
+984 16 h 0 check_sum
+#1000 24 r 0 amd_reserved
+
+# ram initialization internal data
+1024 8 r 0 C0WL0REOST
+1032 8 r 0 C1WL0REOST
+1040 8 r 0 RCVENMT
+1048 4 r 0 C0DRT1
+1052 4 r 0 C1DRT1
+
+# -----------------------------------------------------------------
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 1 Emergency
+6 2 Alert
+6 3 Critical
+6 4 Error
+6 5 Warning
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Disable
+7 1 Enable
+7 2 Keep
+
+# -----------------------------------------------------------------
+checksums
+
+checksum 392 983 984
+
+
new file mode 100644
@@ -0,0 +1,79 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (c) 2011 Sven Schnelle <svens@stackframe.org>
+##
+## This program is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; version 2 of
+## the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+## MA 02110-1301 USA
+##
+
+chip northbridge/intel/i945
+
+ device lapic_cluster 0 on
+ chip cpu/intel/socket_MPGA479M
+ device lapic 0 on end
+ end
+ end
+
+ device pci_domain 0 on
+ device pci 00.0 on end # host bridge
+ device pci 02.0 on end # vga controller
+ device pci 02.1 on end # display controller
+ chip southbridge/intel/i82801gx
+ register "pirqa_routing" = "0x8b"
+ register "pirqb_routing" = "0x8b"
+ register "pirqc_routing" = "0x8b"
+ register "pirqd_routing" = "0x8b"
+ register "pirqe_routing" = "0x8b"
+ register "pirqf_routing" = "0x8b"
+ register "pirqg_routing" = "0x8b"
+ register "pirqh_routing" = "0x8b"
+
+ register "sata_ahci" = "0x0"
+
+ register "gpi13_routing" = "2"
+ register "gpi12_routing" = "2"
+ register "gpi8_routing" = "2"
+
+ device pci 1b.0 on end # Audio Controller
+ device pci 1c.0 on end # Ethernet
+ device pci 1c.1 on end # Atheros WLAN
+ device pci 1d.0 on end # USB UHCI
+ device pci 1d.1 on end # USB UHCI
+ device pci 1d.2 on end # USB UHCI
+ device pci 1d.3 on end # USB UHCI
+ device pci 1d.7 on end # USB2 EHCI
+ device pci 1f.0 on # PCI-LPC bridge
+ chip superio/lenovo/x60_ec
+# device pnp 2e.5 on # Keyboard+Mouse
+# io 0x60 = 0x60
+# io 0x62 = 0x64
+# irq 0x70 = 1
+# irq 0x72 = 12
+# end
+# end
+# chip superio/lenovo/pmh7
+# device pnp ff.1 on # dummy address
+# end
+ end
+ end
+ device pci 1f.1 off end # IDE
+ device pci 1f.2 on end # SATA
+ device pci 1f.3 on end # SMBus
+ end
+ chip southbridge/ricoh/rl5c476
+ end
+ end
+end
new file mode 100644
@@ -0,0 +1,29 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define DMI_TABLE_SIZE 0x55
+
+static u8 dmi_table[DMI_TABLE_SIZE] = {
+ 0x5f, 0x53, 0x4d, 0x5f, 0x29, 0x1f, 0x02, 0x03, 0x55, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x5f, 0x44, 0x4d, 0x49, 0x5f, 0x61, 0x35, 0x00, 0xa0, 0xff, 0x0f, 0x00, 0x01, 0x00, 0x23, 0x00,
+ 0x00, 0x14, 0x00, 0x00, 0x01, 0x02, 0x00, 0xe0, 0x03, 0x07, 0x90, 0xde, 0xcb, 0x7f, 0x00, 0x00,
+ 0x00, 0x00, 0x37, 0x01, 0x63, 0x6f, 0x72, 0x65, 0x73, 0x79, 0x73, 0x74, 0x65, 0x6d, 0x73, 0x20,
+ 0x47, 0x6d, 0x62, 0x48, 0x00, 0x32, 0x2e, 0x30, 0x00, 0x30, 0x33, 0x2f, 0x31, 0x33, 0x2f, 0x32,
+ 0x30, 0x30, 0x38, 0x00, 0x00
+};
new file mode 100644
@@ -0,0 +1,164 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <string.h>
+#include <device/pci.h>
+#include <arch/acpi.h>
+
+/* FIXME: This needs to go into a separate .h file
+ * to be included by the ich7 smi handler, ich7 smi init
+ * code and the mainboard fadt.
+ */
+#define APM_CNT 0xb2
+#define CST_CONTROL 0x85
+#define PST_CONTROL 0x80
+#define ACPI_DISABLE 0x1e
+#define ACPI_ENABLE 0xe1
+#define GNVS_UPDATE 0xea
+
+void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
+{
+ acpi_header_t *header = &(fadt->header);
+ u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), 0x40) & 0xfffe;
+
+ memset((void *) fadt, 0, sizeof(acpi_fadt_t));
+ memcpy(header->signature, "FACP", 4);
+ header->length = sizeof(acpi_fadt_t);
+ header->revision = 3;
+ memcpy(header->oem_id, "CORE ", 6);
+ memcpy(header->oem_table_id, "COREBOOT", 8);
+ memcpy(header->asl_compiler_id, "CORE", 4);
+ header->asl_compiler_revision = 0;
+
+ fadt->firmware_ctrl = (unsigned long) facs;
+ fadt->dsdt = (unsigned long) dsdt;
+ fadt->model = 0x00;
+ fadt->preferred_pm_profile = PM_MOBILE;
+ fadt->sci_int = 0x9;
+ fadt->smi_cmd = APM_CNT;
+ fadt->acpi_enable = ACPI_ENABLE;
+ fadt->acpi_disable = ACPI_DISABLE;
+ fadt->s4bios_req = 0x0;
+ fadt->pstate_cnt = PST_CONTROL;
+
+ fadt->pm1a_evt_blk = pmbase;
+ fadt->pm1b_evt_blk = 0x0;
+ fadt->pm1a_cnt_blk = pmbase + 0x4;
+ fadt->pm1b_cnt_blk = 0x0;
+ fadt->pm2_cnt_blk = pmbase + 0x20;
+ fadt->pm_tmr_blk = pmbase + 0x8;
+ fadt->gpe0_blk = pmbase + 0x28;
+ fadt->gpe1_blk = 0;
+
+ fadt->pm1_evt_len = 4;
+ fadt->pm1_cnt_len = 2;
+ fadt->pm2_cnt_len = 1;
+ fadt->pm_tmr_len = 4;
+ fadt->gpe0_blk_len = 8;
+ fadt->gpe1_blk_len = 0;
+ fadt->gpe1_base = 0;
+ fadt->cst_cnt = CST_CONTROL;
+ fadt->p_lvl2_lat = 1;
+ fadt->p_lvl3_lat = 0x23;
+ fadt->flush_size = 0;
+ fadt->flush_stride = 0;
+ fadt->duty_offset = 1;
+ fadt->duty_width = 3;
+ fadt->day_alrm = 0xd;
+ fadt->mon_alrm = 0x00;
+ fadt->century = 0x32;
+ fadt->iapc_boot_arch = 0x00;
+ fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED |
+ ACPI_FADT_SLEEP_BUTTON | ACPI_FADT_S4_RTC_WAKE |
+ ACPI_FADT_DOCKING_SUPPORTED;
+
+ fadt->reset_reg.space_id = 0;
+ fadt->reset_reg.bit_width = 0;
+ fadt->reset_reg.bit_offset = 0;
+ fadt->reset_reg.resv = 0;
+ fadt->reset_reg.addrl = 0x0;
+ fadt->reset_reg.addrh = 0x0;
+
+ fadt->reset_value = 0;
+ fadt->x_firmware_ctl_l = (unsigned long)facs;
+ fadt->x_firmware_ctl_h = 0;
+ fadt->x_dsdt_l = (unsigned long)dsdt;
+ fadt->x_dsdt_h = 0;
+
+ fadt->x_pm1a_evt_blk.space_id = 1;
+ fadt->x_pm1a_evt_blk.bit_width = 32;
+ fadt->x_pm1a_evt_blk.bit_offset = 0;
+ fadt->x_pm1a_evt_blk.resv = 0;
+ fadt->x_pm1a_evt_blk.addrl = pmbase;
+ fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_evt_blk.space_id = 0;
+ fadt->x_pm1b_evt_blk.bit_width = 0;
+ fadt->x_pm1b_evt_blk.bit_offset = 0;
+ fadt->x_pm1b_evt_blk.resv = 0;
+ fadt->x_pm1b_evt_blk.addrl = 0x0;
+ fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1a_cnt_blk.space_id = 1;
+ fadt->x_pm1a_cnt_blk.bit_width = 16;
+ fadt->x_pm1a_cnt_blk.bit_offset = 0;
+ fadt->x_pm1a_cnt_blk.resv = 0;
+ fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4;
+ fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_cnt_blk.space_id = 0;
+ fadt->x_pm1b_cnt_blk.bit_width = 0;
+ fadt->x_pm1b_cnt_blk.bit_offset = 0;
+ fadt->x_pm1b_cnt_blk.resv = 0;
+ fadt->x_pm1b_cnt_blk.addrl = 0x0;
+ fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm2_cnt_blk.space_id = 1;
+ fadt->x_pm2_cnt_blk.bit_width = 8;
+ fadt->x_pm2_cnt_blk.bit_offset = 0;
+ fadt->x_pm2_cnt_blk.resv = 0;
+ fadt->x_pm2_cnt_blk.addrl = pmbase + 0x20;
+ fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm_tmr_blk.space_id = 1;
+ fadt->x_pm_tmr_blk.bit_width = 32;
+ fadt->x_pm_tmr_blk.bit_offset = 0;
+ fadt->x_pm_tmr_blk.resv = 0;
+ fadt->x_pm_tmr_blk.addrl = pmbase + 0x8;
+ fadt->x_pm_tmr_blk.addrh = 0x0;
+
+ fadt->x_gpe0_blk.space_id = 1;
+ fadt->x_gpe0_blk.bit_width = 64;
+ fadt->x_gpe0_blk.bit_offset = 0;
+ fadt->x_gpe0_blk.resv = 0;
+ fadt->x_gpe0_blk.addrl = pmbase + 0x28;
+ fadt->x_gpe0_blk.addrh = 0x0;
+
+ fadt->x_gpe1_blk.space_id = 0;
+ fadt->x_gpe1_blk.bit_width = 0;
+ fadt->x_gpe1_blk.bit_offset = 0;
+ fadt->x_gpe1_blk.resv = 0;
+ fadt->x_gpe1_blk.addrl = 0x0;
+ fadt->x_gpe1_blk.addrh = 0x0;
+
+ header->checksum =
+ acpi_checksum((void *) fadt, header->length);
+}
new file mode 100644
@@ -0,0 +1,61 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Sven Schnelle <svens@stackframe.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/pirq_routing.h>
+
+const struct irq_routing_table intel_irq_routing_table = {
+ PIRQ_SIGNATURE, /* u32 signature */
+ PIRQ_VERSION, /* u16 version */
+ 32 + 16 * 15, /* Max. number of devices on the bus */
+ 0x00, /* Interrupt router bus */
+ (0x1f << 3) | 0x0, /* Interrupt router dev */
+ 0, /* IRQs devoted exclusively to PCI usage */
+ 0x8086, /* Vendor */
+ 0x122e, /* Device */
+ 0, /* Miniport */
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
+ 0xf5, /* Checksum (has to be set to some value that
+ * would give 0 after the sum of all bytes
+ * for this structure (including checksum).
+ */
+ {
+ /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
+ {0x00, (0x1b << 3) | 0x0, {{0x00, 0xdef8}, {0x61, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0},
+ {0x00, (0x1c << 3) | 0x0, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0},
+ {0x00, (0x1d << 3) | 0x0, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0},
+ {0x00, (0x1f << 3) | 0x0, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0},
+ {0x02, (0x00 << 3) | 0x0, {{0x68, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0},
+ {0x03, (0x00 << 3) | 0x0, {{0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x1, 0x0},
+ {0x03, (0x1f << 3) | 0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0},
+ {0x04, (0x00 << 3) | 0x0, {{0x6a, 0x1cf8}, {0x6b, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x2, 0x0},
+ {0x04, (0x1f << 3) | 0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0},
+ {0x0c, (0x00 << 3) | 0x0, {{0x6b, 0x1cf8}, {0x68, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x3, 0x0},
+ {0x0c, (0x1f << 3) | 0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0},
+ {0x15, (0x00 << 3) | 0x0, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0},
+ {0x00, (0x00 << 3) | 0x0, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0},
+ {0x00, (0x02 << 3) | 0x0, {{0x60, 0x1cf8}, {0x00, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0},
+ {0x00, (0x01 << 3) | 0x0, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0},
+ }
+};
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+ return copy_pirq_routing_table(addr);
+}
new file mode 100644
@@ -0,0 +1,139 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (c) 2011 Sven Schnelle <svens@stackframe.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <arch/io.h>
+#include <boot/tables.h>
+#include <delay.h>
+#ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#include <x86emu/x86emu.h>
+#endif
+#include <arch/coreboot_tables.h>
+#include "chip.h"
+#include <device/pci_def.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#define DUMP_RUNTIME_REGISTERS 0
+
+
+#if 0
+static void pmh7_register_write(int reg, int val)
+{
+ outb(reg, 0x15ec);
+ outb(val, 0x15ee);
+}
+#endif
+static void pmh7_register_set_bit(int reg, int bit)
+{
+ char val;
+
+ outb(reg, 0x15ec);
+ val = inb(0x15ee);
+ outb(reg, 0x15ec);
+ outb(val | (1 << bit), 0x15ee);
+}
+
+static void backlight_enable(void)
+{
+ pmh7_register_set_bit(0x50, 5);
+}
+
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
+static int int15_handler(void)
+{
+ u8 display_id;
+#define BOOT_DISPLAY_DEFAULT 0
+#define BOOT_DISPLAY_CRT (1 << 0)
+#define BOOT_DISPLAY_TV (1 << 1)
+#define BOOT_DISPLAY_EFP (1 << 2)
+#define BOOT_DISPLAY_LCD (1 << 3)
+#define BOOT_DISPLAY_CRT2 (1 << 4)
+#define BOOT_DISPLAY_TV2 (1 << 5)
+#define BOOT_DISPLAY_EFP2 (1 << 6)
+#define BOOT_DISPLAY_LCD2 (1 << 7)
+
+ printk(BIOS_DEBUG, "%s: AX=%04x BX=%04x CX=%04x DX=%04x\n",
+ __func__, M.x86.R_AX, M.x86.R_BX, M.x86.R_CX, M.x86.R_DX);
+
+ switch (M.x86.R_AX) {
+ case 0x5f35: /* Boot Display */
+ M.x86.R_AX = 0x005f; // Success
+ M.x86.R_CL = BOOT_DISPLAY_DEFAULT;
+ break;
+ case 0x5f40: /* Boot Panel Type */
+ /* LCD panel type is SIO GPIO40-43 */
+ // display_id = inb(0x60f) & 0x0f;
+ display_id = 3;
+ // M.x86.R_AX = 0x015f; // Supported but failed
+ M.x86.R_AX = 0x005f; // Success
+ M.x86.R_CL = display_id;
+ break;
+ default:
+ /* Interrupt was not handled */
+ return 0;
+ }
+
+ /* Interrupt handled */
+ return 1;
+}
+
+static void int15_install(void)
+{
+ typedef int (* yabel_handleIntFunc)(void);
+ extern yabel_handleIntFunc yabel_intFuncArray[256];
+ yabel_intFuncArray[0x15] = int15_handler;
+}
+#endif
+
+#if DUMP_RUNTIME_REGISTERS
+static void dump_runtime_registers(void)
+{
+ int i;
+
+ printk(BIOS_DEBUG, "SuperIO runtime register block:\n");
+ for (i=0; i<0x10; i++)
+ printk(BIOS_DEBUG, "%02x ", i);
+ printk(BIOS_DEBUG, "\n");
+ for (i=0; i<0x10; i++)
+ printk(BIOS_DEBUG, "%02x ", inb(0x600 +i));
+ printk(BIOS_DEBUG, "\n");
+}
+#endif
+
+static void mainboard_enable(device_t dev)
+{
+ backlight_enable();
+
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
+ /* Install custom int15 handler for VGA OPROM */
+ int15_install();
+#endif
+#if DUMP_RUNTIME_REGISTERS
+ dump_runtime_registers();
+#endif
+}
+
+struct chip_operations mainboard_ops = {
+ CHIP_NAME("Lenovo Thinkpad X60")
+ .enable_dev = mainboard_enable,
+};
+
new file mode 100644
@@ -0,0 +1,53 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <console/console.h>
+#include <cpu/x86/smm.h>
+#include "southbridge/intel/i82801gx/nvs.h"
+
+/* The southbridge SMI handler checks whether gnvs has a
+ * valid pointer before calling the trap handler
+ */
+extern global_nvs_t *gnvs;
+
+int mainboard_io_trap_handler(int smif)
+{
+ switch (smif) {
+ case 0x99:
+ printk(BIOS_DEBUG, "Sample\n");
+ //gnvs->smif = 0;
+ break;
+ default:
+ return 0;
+ }
+
+ /* On success, the IO Trap Handler returns 0
+ * On failure, the IO Trap Handler returns a value != 0
+ *
+ * For now, we force the return value to 0 and log all traps to
+ * see what's going on.
+ */
+ //gnvs->smif = 0;
+ return 1;
+}
+
new file mode 100644
@@ -0,0 +1,63 @@
+/* generated by MPTable, version 2.0.15*/
+/* as modified by RGM for coreboot */
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <arch/ioapic.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+
+static void *smp_write_config_table(void *v)
+{
+ struct mp_config_table *mc;
+
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+
+ mptable_init(mc, LAPIC_ADDR);
+
+ smp_write_processors(mc);
+
+
+/*Bus: Bus ID Type*/
+/* smp_write_bus(mc, 0, "PCI ");
+ smp_write_bus(mc, 2, "PCI ");
+ smp_write_bus(mc, 3, "PCI ");
+ smp_write_bus(mc, 21, "PCI ");
+ smp_write_bus(mc, 22, "ISA ");*/
+/*I/O APICs: APIC ID Version State Address*/
+ smp_write_ioapic(mc, 2, 0x20, IO_APIC_ADDR);
+ /* TODO: If you have multiple IOAPICs, add them here. */
+/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
+*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x16, 0x0, 0x2, 0x0);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x16, 0x1, 0x2, 0x1);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x16, 0x0, 0x2, 0x2);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x16, 0x3, 0x2, 0x3);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x16, 0x4, 0x2, 0x4);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x16, 0x5, 0x2, 0x5);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x16, 0x6, 0x2, 0x6);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x16, 0x7, 0x2, 0x7);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x16, 0x8, 0x2, 0x8);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x16, 0x9, 0x2, 0x9);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x16, 0xa, 0x2, 0xa);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x16, 0xb, 0x2, 0xb);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x16, 0xc, 0x2, 0xc);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x16, 0xd, 0x2, 0xd);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x16, 0xe, 0x2, 0xe);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x16, 0xf, 0x2, 0xf);
+/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
+ smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x16, 0x0, MP_APIC_ALL, 0x0);
+ smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x16, 0x0, MP_APIC_ALL, 0x1);
+
+ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+ mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+ printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n",
+ mc, smp_next_mpe_entry(mc));
+ return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr);
+ return (unsigned long)smp_write_config_table(v);
+}
new file mode 100644
@@ -0,0 +1,386 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (c) 2011 Sven Schnelle <svens@stackframe.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <device/pci_def.h>
+#include <device/pnp_def.h>
+#include <cpu/x86/lapic.h>
+#include <lib.h>
+#include <pc80/mc146818rtc.h>
+#include <console/console.h>
+#include <usbdebug.h>
+#include <cpu/x86/bist.h>
+#include "northbridge/intel/i945/i945.h"
+#include "northbridge/intel/i945/raminit.h"
+#include "southbridge/intel/i82801gx/i82801gx.h"
+
+void setup_ich7_gpios(void)
+{
+ printk(BIOS_DEBUG, " GPIOS...");
+
+ outl(0x1f40f7c2, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */
+ outl(0xe0e8ffc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */
+ outl(0xfbf6ddfd, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */
+ /* Output Control Registers */
+ outl(0x00040000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */
+ /* Input Control Registers */
+ outl(0x000039ff, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */
+ outl(0x000100f2, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */
+ outl(0x000000f0, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */
+ outl(0x00030043, DEFAULT_GPIOBASE + 0x38); /* GP_LVL */
+
+}
+
+static void ich7_enable_lpc(void)
+{
+ // Enable Serial IRQ
+ pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0);
+ // decode range
+ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0210);
+ // decode range
+ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x1f0d);
+
+ /* range 0x1600 - 0x167f */
+ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x84, 0x1601);
+ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x86, 0x007c);
+
+ /* range 0x15e0 - 0x10ef */
+ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x88, 0x15e1);
+ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8a, 0x000c);
+
+ /* range 0x1680 - 0x169f */
+ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8c, 0x1681);
+ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8e, 0x001c);
+
+}
+
+static void pnp_write_register(device_t dev, int reg, int val)
+{
+ unsigned int port = dev >> 8;
+ outb(reg, port);
+ outb(val, port+1);
+}
+
+static void dock_write_register(int reg, int value)
+{
+ outb(reg, 0x164e);
+ outb(value, 0x164f);
+ /* original software reads the chip id after every
+ I/O operation. Not sure if they are doing it for
+ some code switching depending on hardware or just
+ to have a delay after every operation.
+
+ Do it the same way for now, we may remove it later
+ if it isn't needed
+ */
+ outb(0x20, 0x164e);
+ inb(0x164f);
+}
+
+static void dock_dlpc_init(void)
+{
+ /* Select DLPC module */
+ dock_write_register(0x07, 0x19);
+ /* DLPC Base Address 0x164c */
+ dock_write_register(0x60, 0x16);
+ dock_write_register(0x61, 0x4c);
+ /* Activate DLPC */
+ dock_write_register(0x30, 0x01);
+ outb(0x07, 0x164c);
+
+ while(!(inb(0x164c) & 8))
+ udelay(100 * 100);
+}
+
+static void dock_gpio_set_mode(int port, int mode)
+{
+ dock_write_register(0xf0, port);
+ dock_write_register(0xf1, mode);
+
+}
+
+static void dock_gpio_init(void)
+{
+ /* Select GPIO module */
+ dock_write_register(0x07, 0x07);
+ /* GPIO Base Address 0x1680 */
+ dock_write_register(0x60, 0x16);
+ dock_write_register(0x61, 0x80);
+
+ /* Activate GPIO */
+ dock_write_register(0x30, 0x01);
+
+ dock_gpio_set_mode(0x00, 3);
+ dock_gpio_set_mode(0x01, 3);
+ dock_gpio_set_mode(0x02, 0);
+ dock_gpio_set_mode(0x03, 3);
+ dock_gpio_set_mode(0x04, 4);
+ dock_gpio_set_mode(0x20, 4);
+ dock_gpio_set_mode(0x21, 4);
+ dock_gpio_set_mode(0x23, 4);
+}
+
+static void connect_dock(void)
+{
+ /* Enable 14.318MHz CLK on CLKIN */
+ dock_write_register(0x29, 0x00);
+ dock_write_register(0x29, 0xa0);
+ dock_gpio_init();
+ /* Assert D_PLTRST# */
+ outb(0xfe, 0x1680);
+ dock_dlpc_init();
+ /* Deassert D_PLTRST# */
+ outb(0xff, 0x1680);
+}
+
+static void early_superio_config(void)
+{
+ device_t dev;
+
+ dev=PNP_DEV(0x2e, 0x00);
+ pnp_write_register(dev, 0x29, 0x06);
+
+ /* Enable COM1 */
+ pnp_write_register(dev, 0x07, 0x03);
+ pnp_write_register(dev, 0x60, 0x03);
+ pnp_write_register(dev, 0x61, 0xf8);
+ pnp_write_register(dev, 0x30, 0x01);
+}
+
+static void rcba_config(void)
+{
+ /* Set up virtual channel 0 */
+ RCBA32(0x0014) = 0x80000001;
+ RCBA32(0x001c) = 0x03128010;
+
+ /* Device 1f interrupt pin register */
+ RCBA32(0x3100) = 0x00001230;
+ RCBA32(0x3108) = 0x40004321;
+
+ /* PCIe Interrupts */
+ RCBA32(0x310c) = 0x00004321;
+ /* HD Audio Interrupt */
+ RCBA32(0x3110) = 0x00000002;
+
+ /* dev irq route register */
+ RCBA16(0x3140) = 0x1007;
+ RCBA16(0x3142) = 0x0076;
+ RCBA16(0x3144) = 0x3210;
+ RCBA16(0x3146) = 0x7654;
+ RCBA16(0x3148) = 0x0010;
+
+ /* Enable IOAPIC */
+ RCBA8(0x31ff) = 0x03;
+
+ /* Enable upper 128bytes of CMOS */
+// RCBA32(0x3400) = (1 << 2);
+
+ /* Disable unused devices */
+ RCBA32(0x3418) = FD_PCIE6 | FD_PCIE5 | FD_INTLAN | FD_ACMOD | FD_ACAUD;
+ RCBA32(0x3418) |= (1 << 0); // Required.
+}
+
+static void early_ich7_init(void)
+{
+ uint8_t reg8;
+ uint32_t reg32;
+
+ // program secondary mlt XXX byte?
+ pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20);
+
+ // reset rtc power status
+ reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4);
+ reg8 &= ~(1 << 2);
+ pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8);
+
+ // usb transient disconnect
+ reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad);
+ reg8 |= (3 << 0);
+ pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8);
+
+ reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc);
+ reg32 |= (1 << 29) | (1 << 17);
+ pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32);
+
+ reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc);
+ reg32 |= (1 << 31) | (1 << 27);
+ pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32);
+
+ RCBA32(0x0088) = 0x0011d000;
+ RCBA16(0x01fc) = 0x060f;
+ RCBA32(0x01f4) = 0x86000040;
+ RCBA32(0x0214) = 0x10030549;
+ RCBA32(0x0218) = 0x00020504;
+ RCBA8(0x0220) = 0xc5;
+ reg32 = RCBA32(0x3410);
+ reg32 |= (1 << 6);
+ RCBA32(0x3410) = reg32;
+ reg32 = RCBA32(0x3430);
+ reg32 &= ~(3 << 0);
+ reg32 |= (1 << 0);
+ RCBA32(0x3430) = reg32;
+ RCBA32(0x3418) |= (1 << 0);
+ RCBA16(0x0200) = 0x2008;
+ RCBA8(0x2027) = 0x0d;
+ RCBA16(0x3e08) |= (1 << 7);
+ RCBA16(0x3e48) |= (1 << 7);
+ RCBA32(0x3e0e) |= (1 << 7);
+ RCBA32(0x3e4e) |= (1 << 7);
+
+ // next step only on ich7m b0 and later:
+ reg32 = RCBA32(0x2034);
+ reg32 &= ~(0x0f << 16);
+ reg32 |= (5 << 16);
+ RCBA32(0x2034) = reg32;
+}
+
+#include <cbmem.h>
+
+void main(unsigned long bist)
+{
+ u32 reg32;
+ int boot_mode = 0;
+
+ if (bist == 0)
+ enable_lapic();
+
+ /* Force PCIRST# */
+ pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR);
+ udelay(200 * 1000);
+ pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, 0);
+
+ ich7_enable_lpc();
+
+ connect_dock();
+
+ early_superio_config();
+ /* Set up the console */
+ uart_init();
+
+
+#if CONFIG_USBDEBUG
+ i82801gx_enable_usbdebug(1);
+ early_usbdebug_init();
+#endif
+
+ console_init();
+
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
+ if (MCHBAR16(SSKPD) == 0xCAFE) {
+ printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n");
+ outb(0x6, 0xcf9);
+ while (1) asm("hlt");
+ }
+
+ /* Perform some early chipset initialization required
+ * before RAM initialization can work
+ */
+ i945_early_initialization();
+
+ /* Read PM1_CNT */
+ reg32 = inl(DEFAULT_PMBASE + 0x04);
+ printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32);
+ if (((reg32 >> 10) & 7) == 5) {
+#if CONFIG_HAVE_ACPI_RESUME
+ printk(BIOS_DEBUG, "Resume from S3 detected.\n");
+ boot_mode = 2;
+ /* Clear SLP_TYPE. This will break stage2 but
+ * we care for that when we get there.
+ */
+ outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04);
+
+#else
+ printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n");
+#endif
+ }
+
+ /* Enable SPD ROMs and DDR-II DRAM */
+ enable_smbus();
+
+#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8
+ dump_spd_registers();
+#endif
+
+ sdram_initialize(boot_mode);
+
+ /* Perform some initialization that must run before stage2 */
+ early_ich7_init();
+
+ /* This should probably go away. Until now it is required
+ * and mainboard specific
+ */
+ rcba_config();
+
+ /* Chipset Errata! */
+ fixup_i945_errata();
+
+ /* Initialize the internal PCIe links before we go into stage2 */
+ i945_late_initialization();
+
+#if !CONFIG_HAVE_ACPI_RESUME
+#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8
+#if CONFIG_DEBUG_RAM_SETUP
+ sdram_dump_mchbar_registers();
+
+ {
+ /* This will not work if TSEG is in place! */
+ u32 tom = pci_read_config32(PCI_DEV(0,2,0), 0x5c);
+
+ printk(BIOS_DEBUG, "TOM: 0x%08x\n", tom);
+ ram_check(0x00000000, 0x000a0000);
+ ram_check(0x00100000, tom);
+ }
+#endif
+#endif
+#endif
+
+ MCHBAR16(SSKPD) = 0xCAFE;
+
+#if CONFIG_HAVE_ACPI_RESUME
+ /* Start address of high memory tables */
+ unsigned long high_ram_base = get_top_of_ram() - HIGH_MEMORY_SIZE;
+
+ /* If there is no high memory area, we didn't boot before, so
+ * this is not a resume. In that case we just create the cbmem toc.
+ */
+ if ((boot_mode == 2) && cbmem_reinit((u64)high_ram_base)) {
+ void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME);
+
+ /* copy 1MB - 64K to high tables ram_base to prevent memory corruption
+ * through stage 2. We could keep stuff like stack and heap in high tables
+ * memory completely, but that's a wonderful clean up task for another
+ * day.
+ */
+ if (resume_backup_memory)
+ memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, HIGH_MEMORY_SAVE);
+
+ /* Magic for S3 resume */
+ pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafed00d);
+ }
+#endif
+ /* Set legacy Brightness control to full brightness */
+ pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, 0xff);
+}