===================================================================
@@ -0,0 +1,102 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Keith Hui <buurin@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+/* The L2 cache definitions here only apply to SECC/SECC2 P6 family CPUs
+ * with Klamath (63x), Deschutes (65x) and Katmai (67x) cores.
+ * It is not required for Coppermine (68x) and Tualatin (6bx) cores.
+ * It is currently not known if Celerons with Mendocino core require
+ * the special initialization.
+ * Covington-core Celerons do not have L2 cache.
+ */
+
+/* This is a straight port from coreboot v1. */
+
+#ifndef __P6_L2_CACHE_H
+#define __P6_L2_CACHE_H
+
+#define IA32_PLATFORM_ID 0x17
+#define EBL_CR_POWERON 0x2A
+
+#define BBL_CR_D0 0x88
+#define BBL_CR_D1 0x89
+#define BBL_CR_D2 0x8A
+#define BBL_CR_D3 0x8B
+
+#define BBL_CR_ADDR 0x116
+#define BBL_CR_DECC 0x118
+#define BBL_CR_CTL 0x119
+#define BBL_CR_TRIG 0x11A
+#define BBL_CR_BUSY 0x11B
+#define BBL_CR_CTL3 0x11E
+
+#define BBLCR3_L2_CONFIGURED (1<<0)
+/* bits [4:1] */
+#define BBLCR3_L2_LATENCY 0x1e
+#define BBLCR3_L2_ECC_CHECK_ENABLE (1<<5)
+#define BBLCR3_L2_ADDR_PARITY_ENABLE (1<<6)
+#define BBLCR3_L2_CRTN_PARITY_ENABLE (1<<7)
+#define BBLCR3_L2_ENABLED (1<<8)
+/* bits [17:13] */
+#define BBLCR3_L2_SIZE (0x1f << 13)
+#define BBLCR3_L2_SIZE_256K (0x01 << 13)
+#define BBLCR3_L2_SIZE_512K (0x02 << 13)
+#define BBLCR3_L2_SIZE_1M (0x04 << 13)
+#define BBLCR3_L2_SIZE_2M (0x08 << 13)
+#define BBLCR3_L2_SIZE_4M (0x10 << 13)
+/* bits [22:20] */
+#define BBLCR3_L2_PHYSICAL_RANGE (0x7 << 20);
+/* TODO: This bitmask does not agree with Intel's documentation.
+ * Get confirmation one way or another.
+ */
+#define BBLCR3_L2_SUPPLIED_ECC 0x40000
+
+#define BBLCR3_L2_HARDWARE_DISABLE (1<<23)
+/* Also known as... */
+#define BBLCR3_L2_NOT_PRESENT (1<<23)
+
+/* L2 commands */
+#define L2CMD_RLU 0x0c /* 01100 Data read w/ LRU update */
+#define L2CMD_TRR 0x0e /* 01110 Tag read with data read */
+#define L2CMD_TI 0x0f /* 01111 Tag inquiry */
+#define L2CMD_CR 0x02 /* 00010 L2 control register read */
+#define L2CMD_CW 0x03 /* 00011 L2 control register write */
+#define L2CMD_TWR 0x08 /* 010-- Tag read w/ data read */
+#define L2CMD_TWW 0x1c /* 111-- Tag write w/ data write */
+#define L2CMD_TW 0x10 /* 100-- Tag write */
+/* MESI encode for L2 commands above */
+#define L2CMD_MESI_M 3
+#define L2CMD_MESI_E 2
+#define L2CMD_MESI_S 1
+#define L2CMD_MESI_I 0
+
+extern int calculate_l2_latency(void);
+extern int signal_l2(u32 address_low, u32 data_high, u32 data_low, int way, u8 command);
+extern int read_l2(u32 address);
+extern int write_l2(u32 address, u32 data);
+extern int test_l2_address_alias(u32 address1, u32 address2,
+ u32 data_high, u32 data_low);
+extern int calculate_l2_cache_size(void);
+extern int calculate_l2_physical_address_range(void);
+extern int set_l2_ecc(void);
+
+extern int p6_configure_l2_cache(void);
+
+#endif /* __P6_L2_CACHE_H */
===================================================================
@@ -27,6 +27,7 @@
#include <cpu/x86/lapic.h>
#include <cpu/intel/microcode.h>
#include <cpu/x86/cache.h>
+#include <cpu/intel/l2_cache.h>
static u32 microcode_updates[] = {
#include "microcode-410-MU16522d.h"
@@ -64,6 +65,8 @@
/* Update the microcode */
intel_update_microcode(microcode_updates);
+ p6_configure_l2_cache();
+
/* Enable the local cpu apics */
setup_lapic();
};
===================================================================
@@ -26,6 +26,7 @@
#include <cpu/intel/microcode.h>
#include <cpu/x86/cache.h>
#include <cpu/x86/msr.h>
+#include <cpu/intel/l2_cache.h>
static const uint32_t microcode_updates[] = {
/* Include microcode updates here. */
@@ -46,6 +47,9 @@
/* Update the microcode */
intel_update_microcode(microcode_updates);
+ /* Initialize L2 cache */
+ p6_configure_l2_cache();
+
/* Turn on caching if we haven't already */
x86_enable_cache();
===================================================================
@@ -0,0 +1,810 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2000 Denis Dowling <dpd@alphalink.com.au>
+ * Copyright (C) 2010 Keith Hui <buurin@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ * Intel Pentium L2 Cache initialization.
+ * This code was developed by reverse engineering
+ * the BIOS. Where the code accesses documented
+ * registers I have added comments as best I can.
+ * Some undocumented registers on the Pentium II are
+ * used so some of the documentation is incomplete
+ *
+ * References:
+ * Intel Architecture Software Developer's Manual
+ * Volume 3B: System Programming Guide, Part 2 (#253669)
+ * Appendix B.9
+ */
+
+/* This code is ported from coreboot v1.
+ * The L2 cache initalization sequence here only apply to SECC/SECC2 P6 family
+ * CPUs with Klamath (63x), Deschutes (65x) and Katmai (67x) cores.
+ * It is not required for Coppermine (68x) and Tualatin (6bx) cores.
+ * It is currently not known if Celerons with Mendocino (66x) core require the
+ * special initialization.
+ * Covington-core Celerons do not have L2 cache.
+ */
+
+#include <stdint.h>
+#include <console/console.h>
+#include <string.h>
+#include <cpu/cpu.h>
+#include <cpu/x86/mtrr.h>
+#include <cpu/intel/l2_cache.h>
+#include <cpu/x86/cache.h>
+#include <cpu/x86/msr.h>
+
+/* Latency Tables */
+struct latency_entry {
+ u8 key;
+ u8 value;
+};
+/*
+Latency maps for Deschutes and Katmai.
+No such mapping is available for Klamath.
+
+Cache latency to
+be written to L2 -----++++
+control register ||||
+0000 xx 00 -----> 000 cccc 0
+|||| 00 66MHz
+|||| 10 100MHz
+|||| 01 133MHz (Katmai "B" only)
+++++------ CPU frequency multiplier
+
+0000 2x
+0001 3x
+0010 4x
+0011 5x
+0100 2.5x
+0101 3.5x
+0110 4.5x
+0111 5.5x
+1000 6x
+1001 7x
+1010 8x
+1011 Reserved
+1100 6.5x
+1101 7.5x
+1110 1.5x
+1111 2x
+
+*/
+static const struct latency_entry latency_650_t0[] = {
+ {0x10, 0x02}, {0x50, 0x02}, {0x20, 0x04}, {0x60, 0x06},
+ {0x00, 0x08}, {0x40, 0x0C}, {0x12, 0x06}, {0x52, 0x0A},
+ {0x22, 0x0E}, {0x62, 0x10}, {0x02, 0x10}, {0xFF, 0x00}
+};
+
+static const struct latency_entry latency_650_t1[] = {
+ {0x12, 0x14}, {0x52, 0x16}, {0x22, 0x16}, {0x62, 0x16},
+ {0xFF, 0x00}
+};
+
+static const struct latency_entry latency_670_t0[] = {
+ {0x60, 0x06}, {0x00, 0x08}, {0x12, 0x06}, {0x52, 0x0A},
+ {0x22, 0x0E}, {0x62, 0x10}, {0x02, 0x10}, {0x42, 0x02},
+ {0x11, 0x0E}, {0x51, 0x0C}, {0x21, 0x02}, {0x61, 0x10},
+ {0x01, 0x10}, {0x41, 0x02}, {0xFF, 0x00}
+};
+
+static const struct latency_entry latency_670_t1[] = {
+ {0x22, 0x18}, {0x62, 0x18}, {0x02, 0x1A}, {0x11, 0x18},
+ {0xFF, 0x00}
+};
+
+static const struct latency_entry latency_670_t2[] = {
+ {0x22, 0x12}, {0x62, 0x14}, {0x02, 0x16}, {0x42, 0x1E},
+ {0x11, 0x12}, {0x51, 0x16}, {0x21, 0x1E}, {0x61, 0x14},
+ {0x01, 0x16}, {0x41, 0x1E}, {0xFF, 0x00}
+};
+
+/* Latency tables for 650 model/type */
+static const struct latency_entry *latency_650[] = {
+ latency_650_t0, latency_650_t1, latency_650_t1
+};
+
+/* Latency tables for 670 model/type */
+static const struct latency_entry *latency_670[] = {
+ latency_670_t0, latency_670_t1, latency_670_t2
+};
+
+int calculate_l2_latency(void)
+{
+ u32 eax, l, signature;
+ const struct latency_entry *latency_table, *le;
+ msr_t msr;
+
+ /* First, attempt to get cache latency value from
+ IA32_PLATFORM_ID[56:53]. (L2 Cache Latency Read)
+ */
+ msr = rdmsr(IA32_PLATFORM_ID);
+
+ printk(BIOS_DEBUG,"rdmsr(IA32_PLATFORM_ID) = %x:%x\n", msr.hi, msr.lo);
+
+ l = (msr.hi >> 20) & 0x1e;
+
+ if (l == 0) {
+ /* If latency value isn't available from
+ IA32_PLATFORM_ID[56:53], read it from
+ L2 control register 0 for lookup from
+ tables. */
+ int t, a;
+
+ /* The raw code is read from L2 register 0, bits [7:4]. */
+ a = read_l2(0);
+ if (a < 0)
+ return -1;
+
+ a &= 0xf0;
+
+ if ((a & 0x20) == 0)
+ t = 0;
+ else if (a == 0x20)
+ t = 1;
+ else if (a == 0x30)
+ t = 2;
+ else
+ return -1;
+
+ printk(BIOS_DEBUG,"L2 latency type = %x\n", t);
+
+ /* Get CPUID family/model */
+ signature = cpuid_eax(1) & 0xfff0;
+
+ /* Read EBL_CR_POWERON */
+ msr = rdmsr(EBL_CR_POWERON);
+ /* Get clock multiplier and FSB frequency.
+ * Multiplier is in [25:22].
+ * FSB is in [19:18] in Katmai, [19] in Deschutes ([18] is zero for them).
+ */
+ eax = msr.lo >> 18;
+ if (signature == 0x650) {
+ eax &= ~0xf2;
+ latency_table = latency_650[t];
+ } else if (signature == 0x670) {
+ eax &= ~0xf3;
+ latency_table = latency_670[t];
+ } else
+ return -1;
+
+ /* Search table for matching entry */
+ for (le = latency_table; le->key != eax; le++) {
+ /* Fail if we get to the end of the table */
+ if (le->key == 0xff) {
+ printk(BIOS_DEBUG, "Could not find key %02x in latency table\n", eax);
+ return -1;
+ }
+ }
+
+ l = le->value;
+ }
+
+ printk(BIOS_DEBUG,"L2 Cache latency is %d\n", l / 2);
+
+ /* Writes the calculated latency in BBL_CR_CTL3[4:1]. */
+ msr = rdmsr(BBL_CR_CTL3);
+ msr.lo &= 0xffffffe1;
+ msr.lo |= l;
+ wrmsr(BBL_CR_CTL3, msr);
+
+ return 0;
+}
+
+
+/* Setup address, data_high:data_low into the L2
+ * control registers and then issue command with correct cache way
+ */
+int signal_l2(u32 address, u32 data_high, u32 data_low, int way, u8 command)
+{
+ int i;
+ msr_t msr;
+
+ /* Write L2 Address to BBL_CR_ADDR */
+ msr.lo = address;
+ msr.hi = 0;
+ wrmsr(BBL_CR_ADDR, msr);
+
+ /* Write data to BBL_CR_D{0..3} */
+ msr.lo = data_low;
+ msr.hi = data_high;
+ for (i = BBL_CR_D0; i <= BBL_CR_D3; i++) {
+ wrmsr(i, msr);
+ }
+
+ /* Put the command and way into BBL_CR_CTL */
+ msr = rdmsr(BBL_CR_CTL);
+ msr.lo = (msr.lo & 0xfffffce0) | command | (way << 8);
+ wrmsr(BBL_CR_CTL, msr);
+
+ /* Trigger L2 controller */
+ msr.lo = 0;
+ msr.hi = 0;
+ wrmsr(BBL_CR_TRIG, msr);
+
+ /* Poll the controller to see when done */
+ for (i = 0; i < 0x100; i++) {
+ /* Read BBL_CR_BUSY */
+ msr = rdmsr(BBL_CR_BUSY);
+ /* If not busy then return */
+ if ((msr.lo & 1) == 0)
+ return 0;
+ }
+
+ /* Return timeout code */
+ return -1;
+}
+
+/* Read the L2 Cache controller register at given address */
+int read_l2(u32 address)
+{
+ msr_t msr;
+
+ /* Send a L2 Control Register Read to L2 controller */
+ if (signal_l2(address << 5, 0, 0, 0, L2CMD_CR) != 0)
+ return -1;
+
+ /* If OK then get the result from BBL_CR_ADDR */
+ msr = rdmsr(BBL_CR_ADDR);
+ return (msr.lo >> 0x15);
+
+}
+
+/* Write data into the L2 controller register at address */
+int write_l2(u32 address, u32 data)
+{
+ int v1, v2, i;
+
+ v1 = read_l2(0);
+ if (v1 < 0)
+ return -1;
+
+ v2 = read_l2(2);
+ if (v2 < 0)
+ return -1;
+
+ if ((v1 & 0x20) == 0) {
+ v2 &= 0x3;
+ v2++;
+ } else
+ v2 &= 0x7;
+
+ /* This write has to be replicated to a number of places. Not sure what. */
+
+ for (i = 0; i < v2; i++) {
+
+ u32 data1, data2;
+ // Bits legend
+ // data1 = ffffffff
+ // data2 = 000000dc
+ // address = 00aaaaaa
+ // Final address signalled:
+ // 000fffff fff000c0 000dcaaa aaa00000
+ data1 = data & 0xff;
+ data1 = data1 << 21;
+ data2 = (i << 11) & 0x1800;
+ data1 |= data2;
+ data2 <<= 6;
+ data2 &= 0x20000;
+ data1 |= data2;
+
+ /* Signal L2 controller */
+ if (signal_l2((address << 5) | data1, 0, 0, 0, 3))
+ return -1;
+ }
+ return 0;
+}
+
+/* Write data_high:data_low into the cache at address1. Test address2
+ * to see if the same data is returned. Return 0 if the data matches.
+ * return lower 16 bits if mismatched data if mismatch. Return -1
+ * on error
+ */
+int test_l2_address_alias(u32 address1, u32 address2,
+ u32 data_high, u32 data_low)
+{
+ int d;
+ msr_t msr;
+
+ /* Tag Write with Data Write for L2 */
+ if (signal_l2(address1, data_high, data_low, 0, L2CMD_TWW))
+ return -1;
+
+ /* Tag Read with Data Read for L2 */
+ if (signal_l2(address2, 0, 0, 0, L2CMD_TRR))
+ return -1;
+
+ /* Read data from BBL_CR_D[0-3] */
+ for (d = BBL_CR_D0; d <= BBL_CR_D3; d++) {
+ msr = rdmsr(d);
+ if (msr.lo != data_low || msr.hi != data_high)
+ return (msr.lo & 0xffff);
+ }
+
+ return 0;
+}
+
+/* Calculates the L2 cache size.
+ *
+ * Reference: Intel(R) 64 and IA-32 Architectures Software Developers Manual
+ * Volume 3B: System Programming Guide, Part 2, Intel pub. 253669, pg. B-172.
+ *
+ */
+int calculate_l2_cache_size(void)
+{
+ int v;
+ msr_t msr;
+ u32 cache_setting;
+ u32 address, size, eax, bblcr3;
+
+ v = read_l2(0);
+ if (v < 0)
+ return -1;
+ if ((v & 0x20) == 0) {
+ msr = rdmsr(BBL_CR_CTL3);
+ bblcr3 = msr.lo & ~BBLCR3_L2_SIZE;
+ /*
+ * Successively write in all the possible cache size per bank
+ * into BBL_CR_CTL3[17:13], starting from 256KB (00001) to 4MB (10000),
+ * and read the last value written and accepted by the cache.
+ *
+ * No idea why these bits are writable at all.
+ */
+ for (cache_setting = BBLCR3_L2_SIZE_256K;
+ cache_setting <= BBLCR3_L2_SIZE_4M; cache_setting <<= 1) {
+
+ eax = bblcr3 | cache_setting;
+ msr.lo = eax;
+ wrmsr(BBL_CR_CTL3, msr);
+ msr = rdmsr(BBL_CR_CTL3);
+
+ /* Value not accepted */
+ if (msr.lo != eax)
+ break;
+ }
+
+ /* Backtrack to the last value that worked... */
+ cache_setting >>= 1;
+
+ /* and write it into BBL_CR_CTL3 */
+ msr.lo &= ~BBLCR3_L2_SIZE;
+ msr.lo |= (cache_setting & BBLCR3_L2_SIZE);
+
+ wrmsr(BBL_CR_CTL3, msr);
+
+ printk(BIOS_DEBUG,"Maximum cache mask is %x\n", cache_setting);
+
+ /* For now, BBL_CR_CTL3 has the highest cache "size" that register
+ * will accept. Now we'll ping the cache and see where it wraps.
+ */
+
+ /* Write aaaaaaaa:aaaaaaaa to address 0 in the l2 cache.
+ * If this "alias test" returns an "address", it means the
+ * cache cannot be written to properly, and we have a problem.
+ */
+ v = test_l2_address_alias(0, 0, 0xaaaaaaaa, 0xaaaaaaaa);
+ if (v != 0)
+ return -1;
+
+ /* Start with 32K wrap point (256KB actually) */
+ size = 1;
+ address = 0x8000;
+
+ while (1) {
+ v = test_l2_address_alias(address, 0, 0x55555555,
+ 0x55555555);
+ // Write failed.
+ if (v < 0)
+ return -1;
+ // It wraps here.
+ else if (v == 0)
+ break;
+
+ size <<= 1;
+ address <<= 1;
+
+ if (address > 0x200000)
+ return -1;
+ }
+
+ /* Mask size */
+ size &= 0x3e;
+
+ /* Shift to [17:13] */
+ size <<= 12;
+
+ /* Set this into BBL_CR_CTL3 */
+ msr = rdmsr(BBL_CR_CTL3);
+ msr.lo &= ~BBLCR3_L2_SIZE;
+ msr.lo |= size;
+ wrmsr(BBL_CR_CTL3, msr);
+
+ printk(BIOS_DEBUG,"L2 Cache Mask is %x\n", size);
+
+ /* Shift to [6:2] */
+ size >>= 11;
+
+ v = read_l2(2);
+
+ if (v < 0)
+ return -1;
+
+ printk(BIOS_DEBUG,"L2(2): %x ", v);
+
+ v &= 0x3;
+
+ /* Shift size right by v */
+ size >>= v;
+
+ /* Or in this size */
+ v |= size;
+
+ printk(BIOS_DEBUG,"-> %x\n", v);
+
+ if (write_l2(2, v) != 0)
+ return -1;
+ } else {
+ // Some cache size information is available from L2 registers.
+ // Work from there.
+ int b, c;
+
+ v = read_l2(2);
+
+ printk(BIOS_DEBUG,"L2(2) = %x\n", v);
+
+ if (v < 0)
+ return -1;
+
+ // L2 register 2 bitmap: cc---bbb
+ b = v & 0x7;
+ c = v >> 6;
+
+ v = 1 << c * b;
+
+ v &= 0xf;
+
+ printk(BIOS_DEBUG,"Calculated a = %x\n", v);
+
+ if (v == 0)
+ return -1;
+
+ /* Shift to 17:14 */
+ v <<= 14;
+
+ /* Write this size into BBL_CR_CTL3 */
+ msr = rdmsr(BBL_CR_CTL3);
+ msr.lo &= ~BBLCR3_L2_SIZE;
+ msr.lo |= v;
+ wrmsr(BBL_CR_CTL3, msr);
+ }
+
+ return 0;
+}
+
+// L2 physical address range can be found from L2 control register 3, bits [2:0].
+int calculate_l2_physical_address_range(void)
+{
+ int r0, r3;
+ msr_t msr;
+
+ r3 = read_l2(3);
+ if (r3 < 0)
+ return -1;
+
+ r0 = read_l2(0);
+ if (r0 < 0)
+ return -1;
+
+ if (r0 & 0x20)
+ r3 = 0x7;
+ else
+ r3 &= 0x7;
+
+ printk(BIOS_DEBUG,"L2 Physical Address Range is %dM\n", (1 << r3) * 512);
+
+ /* Shift into [22:20] to be saved into BBL_CR_CTL3. */
+ r3 = r3 << 20;
+
+ msr = rdmsr(BBL_CR_CTL3);
+ msr.lo &= ~BBLCR3_L2_PHYSICAL_RANGE;
+ msr.lo |= r3;
+ wrmsr(BBL_CR_CTL3, msr);
+
+ return 0;
+}
+
+int set_l2_ecc(void)
+{
+ u32 eax;
+ const u32 data1 = 0xaa55aa55;
+ const u32 data2 = 0xaaaaaaaa;
+ msr_t msr;
+
+ /* Set User Supplied ECC in BBL_CR_CTL */
+ msr = rdmsr(BBL_CR_CTL);
+ msr.lo |= BBLCR3_L2_SUPPLIED_ECC;
+ wrmsr(BBL_CR_CTL, msr);
+
+ /* Write a value into the L2 Data ECC register BBL_CR_DECC */
+ msr.lo = data1;
+ msr.hi = 0;
+ wrmsr(BBL_CR_DECC, msr);
+
+ if (test_l2_address_alias(0, 0, data2, data2) < 0)
+ return -1;
+
+ /* Read back ECC from BBL_CR_DECC */
+ msr = rdmsr(BBL_CR_DECC);
+ eax = msr.lo;
+
+ if (eax == data1) {
+ printk(BIOS_DEBUG,"L2 ECC Checking is enabled\n");
+
+ /* Set ECC Check Enable in BBL_CR_CTL3 */
+ msr = rdmsr(BBL_CR_CTL3);
+ msr.lo |= BBLCR3_L2_ECC_CHECK_ENABLE;
+ wrmsr(BBL_CR_CTL3, msr);
+ }
+
+ /* Clear User Supplied ECC in BBL_CR_CTL */
+ msr = rdmsr(BBL_CR_CTL);
+ msr.lo &= ~BBLCR3_L2_SUPPLIED_ECC;
+ wrmsr(BBL_CR_CTL, msr);
+
+ return 0;
+}
+
+/*
+ * This is the function called from CPU initialization
+ * driver to set up P6 family L2 cache.
+ */
+
+int p6_configure_l2_cache(void)
+{
+ msr_t msr, bblctl3;
+ unsigned int eax;
+ u16 signature;
+ int cache_size, bank;
+ int result, calc_eax;
+ int v, a;
+
+ int badclk1, badclk2, clkratio;
+ int crctl3_or;
+
+ printk(BIOS_INFO, "Configuring L2 cache... ");
+
+ /* Read BBL_CR_CTL3 */
+ bblctl3 = rdmsr(BBL_CR_CTL3);
+ /* If bit 23 (L2 Hardware disable) is set then done */
+ /* These would be Covington core Celerons with no L2 cache */
+ if (bblctl3.lo & BBLCR3_L2_NOT_PRESENT) {
+ printk(BIOS_INFO,"hardware disabled\n");
+ return 0;
+ }
+
+ signature = cpuid_eax(1) & 0xfff0;
+
+ /* Klamath-specific bit settings for certain
+ preliminary checks.
+ */
+ if (signature == 0x630) {
+ clkratio = 0x1c00000;
+ badclk2 = 0x1000000;
+ crctl3_or = 0x44000;
+ } else {
+ clkratio = 0x3c00000;
+ badclk2 = 0x3000000;
+ crctl3_or = 0x40000;
+ }
+ badclk1 = 0xc00000;
+
+ /* Read EBL_CR_POWERON */
+ msr = rdmsr(EBL_CR_POWERON);
+ eax = msr.lo;
+ /* Mask out [22-25] Clock frequency ratio */
+ eax &= clkratio;
+ if (eax == badclk1 || eax == badclk2) {
+ printk(BIOS_ERR, "Incorrect clock frequency ratio %x\n", eax);
+ return -1;
+ }
+
+ disable_cache();
+
+ /* Mask out from BBL_CR_CTL3:
+ * [0] L2 Configured
+ * [5] ECC Check Enable
+ * [6] Address Parity Check Enable
+ * [7] CRTN Parity Check Enable
+ * [8] L2 Enabled
+ * [12:11] Number of L2 banks
+ * [17:13] Cache size per bank
+ * [18] (Set below)
+ * [22:20] L2 Physical Address Range Support
+ */
+ bblctl3.lo &= 0xff88061e;
+ /* Set:
+ * [17:13] = 00010 = 512Kbyte Cache size per bank (63x)
+ * [17:13] = 00000 = 128Kbyte Cache size per bank (all others)
+ * [18] Cache state error checking enable
+ */
+ bblctl3.lo |= crctl3_or;
+
+ /* Write BBL_CR_CTL3 */
+ wrmsr(BBL_CR_CTL3, bblctl3);
+
+ if (signature != 0x630) {
+ eax = bblctl3.lo;
+
+ /* Set the l2 latency in BBL_CR_CTL3 */
+ if (calculate_l2_latency() != 0)
+ goto bad;
+
+ /* Read the new latency values back */
+ bblctl3 = rdmsr(BBL_CR_CTL3);
+ calc_eax = bblctl3.lo;
+
+ /* Write back the original default value */
+ bblctl3.lo = eax;
+ wrmsr(BBL_CR_CTL3, bblctl3);
+
+ /* Write BBL_CR_CTL3[27:26] (reserved??) to bits [1:0] of L2 register 4.
+ * Apparently all other bits must be preserved, hence these code.
+ */
+
+ v = (calc_eax >> 26) & 0x3;
+
+ printk(BIOS_DEBUG,"write_l2(4, %x)\n", v);
+
+ a = read_l2(4);
+ if (a >= 0)
+ {
+ a &= 0xfffc;
+ a |= v;
+ a = write_l2(4, a);
+ /* a now contains result code from write_l2() */
+ }
+ if (a != 0)
+ goto bad;
+
+ /* Restore the correct latency value into BBL_CR_CTL3 */
+ bblctl3.lo = calc_eax;
+ wrmsr(BBL_CR_CTL3, bblctl3);
+ } /* ! 63x CPU */
+
+ /* Read L2 register 0 */
+ v = read_l2(0);
+
+ /* If L2(0)[5] set (and can be read properly), enable CRTN and address parity
+ */
+ if (v >= 0 && (v & 0x20)) {
+ bblctl3 = rdmsr(BBL_CR_CTL3);
+ bblctl3.lo |= (BBLCR3_L2_ADDR_PARITY_ENABLE |
+ BBLCR3_L2_CRTN_PARITY_ENABLE);
+ wrmsr(BBL_CR_CTL3, bblctl3);
+ }
+
+ /* If something goes wrong at L2 ECC setup, cache ECC
+ * will just remain disabled.
+ */
+ set_l2_ecc();
+
+ if (calculate_l2_physical_address_range() != 0) {
+ printk(BIOS_ERR, "Failed to calculate L2 physical address range");
+ goto bad;
+ }
+
+ if (calculate_l2_cache_size() != 0) {
+ printk(BIOS_ERR, "Failed to calculate L2 cache size");
+ goto bad;
+ }
+
+ /* Turn on cache. Only L1 is active at this time. */
+ enable_cache();
+
+ /* Get the calculated cache size from BBL_CR_CTL3[17:13] */
+ bblctl3 = rdmsr(BBL_CR_CTL3);
+ cache_size = (bblctl3.lo & BBLCR3_L2_SIZE);
+ if (cache_size == 0)
+ cache_size = 0x1000;
+ cache_size = cache_size << 3;
+
+ /* TODO: Cache size above is per bank. We're supposed to get
+ * the number of banks from BBL_CR_CTL3[12:11].
+ * Confirm that this still provides the correct answer.
+ */
+ bank = (bblctl3.lo >> 11) & 0x3;
+ if (bank == 0)
+ bank = 1;
+
+ printk(BIOS_INFO, "size %dK... ", cache_size * bank * 4 / 1024);
+
+ /* Write to all cache lines to initialize */
+
+ while (cache_size > 0) {
+
+ /* Each cache line is 32 bytes. */
+ cache_size -= 32;
+
+ /* Update each way */
+
+ /* We're supposed to get L2 associativity from BBL_CR_CTL3[10:9].
+ * But this code only applies to certain members of the P6 processor family
+ * and since all P6 processors have 4-way L2 cache, we can safely assume
+ * 4 way for all cache operations.
+ */
+
+ for (v = 0; v < 4; v++) {
+ /* Send Tag Write w/Data Write (TWW) to L2 controller
+ * MESI = Invalid
+ */
+ if (signal_l2(cache_size, 0, 0, v, L2CMD_TWW | L2CMD_MESI_I) != 0) {
+ printk(BIOS_ERR, "Failed on signal_l2(%x, %x)\n",
+ cache_size, v);
+ goto bad;
+ }
+ }
+ }
+ printk(BIOS_DEBUG, "L2 Cache lines initialized\n");
+
+ /* Disable cache */
+ disable_cache();
+
+ /* Set L2 cache configured in BBL_CR_CTL3 */
+ bblctl3 = rdmsr(BBL_CR_CTL3);
+ bblctl3.lo |= BBLCR3_L2_CONFIGURED;
+ wrmsr(BBL_CR_CTL3, bblctl3);
+
+ /* Invalidate cache and discard unsaved writes */
+ asm volatile ("invd");
+
+ /* Write 0 to L2 control register 5 */
+ if (write_l2(5, 0) != 0) {
+ printk(BIOS_ERR,"write_l2(5, 0) failed\n");
+ goto done;
+ }
+
+ bblctl3 = rdmsr(BBL_CR_CTL3);
+ if (signature == 0x650) {
+ /* Change the L2 latency to 0101 then back to
+ * original value. I don't know why this is needed - dpd
+ */
+ eax = bblctl3.lo;
+ bblctl3.lo &= ~BBLCR3_L2_LATENCY;
+ bblctl3.lo |= 0x0a;
+ wrmsr(BBL_CR_CTL3, bblctl3);
+ bblctl3.lo = eax;
+ wrmsr(BBL_CR_CTL3, bblctl3);
+ }
+
+ /* Enable L2 in BBL_CR_CTL3 */
+ bblctl3.lo |= BBLCR3_L2_ENABLED;
+ wrmsr(BBL_CR_CTL3, bblctl3);
+
+ /* Turn on cache. Both L1 and L2 are now active. Wahoo! */
+done:
+ result = 0;
+ goto out;
+bad:
+ result = -1;
+out:
+ printk(BIOS_INFO, "done.\n");
+ return result;
+}
+
===================================================================
@@ -19,9 +19,11 @@
##
ramstage-y += slot_1.c
+ramstage-y += l2_cache.c
subdirs-y += ../model_6xx
subdirs-y += ../model_65x
subdirs-y += ../model_67x
+subdirs-y += ../model_68x
subdirs-y += ../model_6bx
subdirs-y += ../../x86/tsc
subdirs-y += ../../x86/mtrr