Submitter | Sven Schnelle |
---|---|
Date | 2011-01-19 10:23:29 |
Message ID | <87r5c9p4ym.fsf@begreifnix.stackframe.org> |
Download | mbox | patch |
Permalink | /patch/2535/ |
State | Accepted |
Headers | show |
Comments
Hi List, Can somebody please comment on the patch below? Would be nice as this patch is required for the upcoming Thinkpad Patch Series. Cheers, Sven. Sven Schnelle <svens@stackframe.org> writes: > Stefan Reinauer <stefan.reinauer@coreboot.org> writes: > >> * Sven Schnelle <svens@stackframe.org> [110117 21:46]: >>> Index: src/ec/acpi/ec.h >>> =================================================================== >>> --- src/ec/acpi/ec.h (revision 0) >>> +++ src/ec/acpi/ec.h (working copy) >>> @@ -17,9 +17,11 @@ >>> * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA >>> */ >>> >>> -#ifndef _MAINBOARD_EC_H >>> -#define _MAINBOARD_EC_H >>> +#ifndef _EC_ACPI_H >>> +#define _EC_ACPI_H >>> >>> +#include "chip.h" >> Is chip.h needed ? > > No, i removed it now. > >>> + >>> #define EC_DATA 0x62 >>> #define EC_SC 0x66 >> >>> @@ -28,6 +28,7 @@ >>> select SOUTHBRIDGE_TI_PCIXX12 >>> select SUPERIO_SMSC_FDC37N972 >>> select SUPERIO_SMSC_SIO10N268 >>> + select EC_ACPI >>> select BOARD_HAS_FADT >>> select HAVE_ACPI_TABLES >>> select HAVE_PIRQ_TABLE >> >> Maybe we want to add support for explicit EC types and reference those >> here? And then have the acpi code shared between all those ECs. >> The Roda RK886EX has it's EC code spread out into src/superio/renesas, >> too. > > I will submit patches for that later. For now i want to remove only the > ec code in the mainboard dir for the upcoming Thinkpad patch. > >>> Index: src/mainboard/getac/p470/mainboard_smi.c >>> =================================================================== >>> --- src/mainboard/getac/p470/mainboard_smi.c (revision 6260) >>> +++ src/mainboard/getac/p470/mainboard_smi.c (working copy) >>> @@ -26,7 +26,8 @@ >>> #include "southbridge/intel/i82801gx/i82801gx.h" >>> #include "southbridge/intel/i82801gx/nvs.h" >>> #include "northbridge/intel/i945/udelay.c" >>> -#include "ec.c" >>> +#include <ec/acpi/ec.h> >> >> ec/acpi.h? > > I want to keep the current layout. When adding other ECs (like the PMH7 > in the thinkpad, which can be considered to be an EC), the path will > be something like ec/lenovo/pmh7. I don't want to have header files > in the toplevel ec directory. > >>> +#include "ec_oem.c" >>> >>> #define MAX_LCD_BRIGHTNESS 0xd8 >>> >>> Index: src/mainboard/getac/p470/Makefile.inc >>> =================================================================== >>> --- src/mainboard/getac/p470/Makefile.inc (revision 6260) >>> +++ src/mainboard/getac/p470/Makefile.inc (working copy) >>> @@ -21,3 +21,4 @@ >>> ramstage-$(CONFIG_HAVE_ACPI_SLIC) += acpi_slic.c >>> >>> smm-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.c >>> +smm-$(CONFIG_HAVE_SMI_HANDLER) += ../../../ec/acpi/ec.c >> >> shouldn't the EC makefile in src/ec/acpi say >> >> smm-$(CONFIG_HAVE_SMI_HANDLER) += ec.c instead? > > Done. You're right, looks better this way. > >>> Index: src/mainboard/getac/p470/devicetree.cb >>> =================================================================== >>> --- src/mainboard/getac/p470/devicetree.cb (revision 6260) >>> +++ src/mainboard/getac/p470/devicetree.cb (working copy) >>> @@ -133,6 +133,12 @@ >>> end >>> device pnp 4e.b off # HWM >>> end >>> + chip ec/acpi >>> + device pnp ff.1 on >>> + io 0x60 = 0x62 >>> + io 0x62 = 0x66 >>> + end >>> + end >> >> what's the device pnp and io 0x60/io 0x62 used for? this does not look >> too good. I would wipe it. > > The reason to have the dummy pnp device is that coreboot has no > device type for static I/O addresses in the devicetree.cb. At least i > didn't found any sign of its existence. So i've added that dummy device > to reserve the 0x62/0x66 ACPI register pair for the ACPI EC. > > As you know the code much better than i do, i removed it in the attached > patch anyways. > > Signed-off-by: Sven Schnelle <svens@stackframe.org> > > Index: src/Kconfig > =================================================================== > --- src/Kconfig (revision 6275) > +++ src/Kconfig (working copy) > @@ -124,6 +124,8 @@ > source src/superio/Kconfig > comment "Devices" > source src/devices/Kconfig > +comment "Embedded Controllers" > +source src/ec/Kconfig > > endmenu > > Index: src/ec/Kconfig > =================================================================== > --- src/ec/Kconfig (revision 0) > +++ src/ec/Kconfig (revision 0) > @@ -0,0 +1 @@ > +source src/ec/acpi/Kconfig > Index: src/ec/Makefile.inc > =================================================================== > --- src/ec/Makefile.inc (revision 0) > +++ src/ec/Makefile.inc (revision 0) > @@ -0,0 +1 @@ > +subdirs-y += acpi > Index: src/ec/acpi/Kconfig > =================================================================== > --- src/ec/acpi/Kconfig (revision 0) > +++ src/ec/acpi/Kconfig (revision 0) > @@ -0,0 +1,5 @@ > +config EC_ACPI > + bool > + help > + ACPI Embedded Controller interface. Mostly found > + in latops. > Index: src/ec/acpi/Makefile.inc > =================================================================== > --- src/ec/acpi/Makefile.inc (revision 0) > +++ src/ec/acpi/Makefile.inc (revision 0) > @@ -0,0 +1,2 @@ > +ramstage-y += ec.c > +smm-$(CONFIG_HAVE_SMI_HANDLER) += ec.c > Index: src/ec/acpi/ec.c > =================================================================== > --- src/ec/acpi/ec.c (revision 0) > +++ src/ec/acpi/ec.c (working copy) > @@ -20,6 +20,7 @@ > */ > > #include <console/console.h> > +#include <device/device.h> > #include <arch/io.h> > #include <delay.h> > #include "ec.h" > @@ -112,3 +113,6 @@ > return send_ec_data(data); > } > > +struct chip_operations ec_acpi_ops = { > + CHIP_NAME("ACPI Embedded Controller") > +}; > Index: src/ec/acpi/ec.h > =================================================================== > --- src/ec/acpi/ec.h (revision 0) > +++ src/ec/acpi/ec.h (working copy) > @@ -17,8 +17,8 @@ > * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > */ > > -#ifndef _MAINBOARD_EC_H > -#define _MAINBOARD_EC_H > +#ifndef _EC_ACPI_H > +#define _EC_ACPI_H > > #define EC_DATA 0x62 > #define EC_SC 0x66 > Index: src/mainboard/getac/p470/Kconfig > =================================================================== > --- src/mainboard/getac/p470/Kconfig (revision 6275) > +++ src/mainboard/getac/p470/Kconfig (working copy) > @@ -28,6 +28,7 @@ > select SOUTHBRIDGE_TI_PCIXX12 > select SUPERIO_SMSC_FDC37N972 > select SUPERIO_SMSC_SIO10N268 > + select EC_ACPI > select BOARD_HAS_FADT > select HAVE_ACPI_TABLES > select HAVE_PIRQ_TABLE > Index: src/mainboard/getac/p470/mainboard_smi.c > =================================================================== > --- src/mainboard/getac/p470/mainboard_smi.c (revision 6275) > +++ src/mainboard/getac/p470/mainboard_smi.c (working copy) > @@ -26,7 +26,8 @@ > #include "southbridge/intel/i82801gx/i82801gx.h" > #include "southbridge/intel/i82801gx/nvs.h" > #include "northbridge/intel/i945/udelay.c" > -#include "ec.c" > +#include <ec/acpi/ec.h> > +#include "ec_oem.c" > > #define MAX_LCD_BRIGHTNESS 0xd8 > > Index: src/mainboard/getac/p470/devicetree.cb > =================================================================== > --- src/mainboard/getac/p470/devicetree.cb (revision 6275) > +++ src/mainboard/getac/p470/devicetree.cb (working copy) > @@ -133,6 +133,8 @@ > end > device pnp 4e.b off # HWM > end > + chip ec/acpi > + end > end > > end > Index: src/mainboard/getac/p470/ec.c > =================================================================== > --- src/mainboard/getac/p470/ec.c (revision 6275) > +++ src/mainboard/getac/p470/ec.c (working copy) > @@ -1,235 +0,0 @@ > -/* > - * This file is part of the coreboot project. > - * > - * Copyright (C) 2008-2009 coresystems GmbH > - * > - * This program is free software; you can redistribute it and/or > - * modify it under the terms of the GNU General Public License as > - * published by the Free Software Foundation; version 2 of > - * the License. > - * > - * This program is distributed in the hope that it will be useful, > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > - * GNU General Public License for more details. > - * > - * You should have received a copy of the GNU General Public License > - * along with this program; if not, write to the Free Software > - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, > - * MA 02110-1301 USA > - */ > - > -#include <console/console.h> > -#include <arch/io.h> > -#include <delay.h> > -#include "ec.h" > - > -int send_ec_command(u8 command) > -{ > - int timeout; > - > - timeout = 0x7ff; > - while ((inb(EC_SC) & EC_IBF) && --timeout) { > - udelay(10); > - if ((timeout & 0xff) == 0) > - printk(BIOS_SPEW, "."); > - } > - if (!timeout) { > - printk(BIOS_DEBUG, "Timeout while sending command 0x%02x to EC!\n", > - command); > - // return -1; > - } > - > - outb(command, EC_SC); > - return 0; > -} > - > -int send_ec_data(u8 data) > -{ > - int timeout; > - > - timeout = 0x7ff; > - while ((inb(EC_SC) & EC_IBF) && --timeout) { // wait for IBF = 0 > - udelay(10); > - if ((timeout & 0xff) == 0) > - printk(BIOS_SPEW, "."); > - } > - if (!timeout) { > - printk(BIOS_DEBUG, "Timeout while sending data 0x%02x to EC!\n", > - data); > - // return -1; > - } > - > - outb(data, EC_DATA); > - > - return 0; > -} > - > -int send_ec_data_nowait(u8 data) > -{ > - outb(data, EC_DATA); > - > - return 0; > -} > - > -u8 recv_ec_data(void) > -{ > - int timeout; > - u8 data; > - > - timeout = 0x7fff; > - while (--timeout) { // Wait for OBF = 1 > - if (inb(EC_SC) & EC_OBF) { > - break; > - } > - udelay(10); > - if ((timeout & 0xff) == 0) > - printk(BIOS_SPEW, "."); > - } > - if (!timeout) { > - printk(BIOS_DEBUG, "\nTimeout while receiving data from EC!\n"); > - // return -1; > - } > - > - data = inb(EC_DATA); > - printk(BIOS_SPEW, "recv_ec_data: 0x%02x\n", data); > - > - return data; > -} > - > -u8 ec_read(u8 addr) > -{ > - send_ec_command(0x80); > - send_ec_data(addr); > - > - return recv_ec_data(); > -} > - > -int ec_write(u8 addr, u8 data) > -{ > - send_ec_command(0x81); > - send_ec_data(addr); > - return send_ec_data(data); > -} > - > -int ec_dump_status(void) > -{ > - u8 ec_sc = inb(EC_SC); > - printk(BIOS_DEBUG, "Embedded Controller Status: "); > - if (ec_sc & (1 << 6)) printk(BIOS_DEBUG, "SMI_EVT "); > - if (ec_sc & (1 << 5)) printk(BIOS_DEBUG, "SCI_EVT "); > - if (ec_sc & (1 << 4)) printk(BIOS_DEBUG, "BURST "); > - if (ec_sc & (1 << 3)) printk(BIOS_DEBUG, "CMD "); > - if (ec_sc & (1 << 1)) printk(BIOS_DEBUG, "IBF "); > - if (ec_sc & (1 << 0)) printk(BIOS_DEBUG, "OBF "); > - printk(BIOS_DEBUG, "\n"); > - > - return ec_sc; > -} > - > - > -/* ********************************** */ > - > -int send_ec_oem_command(u8 command) > -{ > - int timeout; > - > - timeout = 0x7ff; > - while ((inb(EC_OEM_SC) & EC_IBF) && --timeout) { > - udelay(10); > - if ((timeout & 0xff) == 0) > - printk(BIOS_SPEW, "."); > - } > - if (!timeout) { > - printk(BIOS_DEBUG, "Timeout while sending OEM command 0x%02x to EC!\n", > - command); > - // return -1; > - } > - > - outb(command, EC_OEM_SC); > - return 0; > -} > - > -int send_ec_oem_data(u8 data) > -{ > - int timeout; > - > - timeout = 0x7ff; > - while ((inb(EC_OEM_SC) & EC_IBF) && --timeout) { // wait for IBF = 0 > - udelay(10); > - if ((timeout & 0xff) == 0) > - printk(BIOS_SPEW, "."); > - } > - if (!timeout) { > - printk(BIOS_DEBUG, "Timeout while sending OEM data 0x%02x to EC!\n", > - data); > - // return -1; > - } > - > - outb(data, EC_OEM_DATA); > - > - return 0; > -} > - > -int send_ec_oem_data_nowait(u8 data) > -{ > - outb(data, EC_OEM_DATA); > - > - return 0; > -} > - > -u8 recv_ec_oem_data(void) > -{ > - int timeout; > - u8 data; > - > - timeout = 0x7fff; > - while (--timeout) { // Wait for OBF = 1 > - if (inb(EC_OEM_SC) & EC_OBF) { > - break; > - } > - udelay(10); > - if ((timeout & 0xff) == 0) > - printk(BIOS_SPEW, "."); > - } > - if (!timeout) { > - printk(BIOS_DEBUG, "\nTimeout while receiving OEM data from EC!\n"); > - // return -1; > - } > - > - data = inb(EC_OEM_DATA); > - // printk(BIOS_SPEW, "recv_ec_oem_data: 0x%02x\n", data); > - > - return data; > -} > - > -u8 ec_oem_read(u8 addr) > -{ > - send_ec_oem_command(0x80); > - send_ec_oem_data(addr); > - > - return recv_ec_oem_data(); > -} > - > -int ec_oem_write(u8 addr, u8 data) > -{ > - send_ec_oem_command(0x81); > - send_ec_oem_data(addr); > - return send_ec_oem_data(data); > -} > - > -int ec_oem_dump_status(void) > -{ > - u8 ec_sc = inb(EC_OEM_SC); > - printk(BIOS_DEBUG, "Embedded Controller Status: "); > - if (ec_sc & (1 << 6)) printk(BIOS_DEBUG, "SMI_EVT "); > - if (ec_sc & (1 << 5)) printk(BIOS_DEBUG, "SCI_EVT "); > - if (ec_sc & (1 << 4)) printk(BIOS_DEBUG, "BURST "); > - if (ec_sc & (1 << 3)) printk(BIOS_DEBUG, "CMD "); > - if (ec_sc & (1 << 1)) printk(BIOS_DEBUG, "IBF "); > - if (ec_sc & (1 << 0)) printk(BIOS_DEBUG, "OBF "); > - printk(BIOS_DEBUG, "\n"); > - > - return ec_sc; > -} > - > Index: src/mainboard/getac/p470/ec_oem.c > =================================================================== > --- src/mainboard/getac/p470/ec_oem.c (revision 6275) > +++ src/mainboard/getac/p470/ec_oem.c (working copy) > @@ -22,114 +22,9 @@ > #include <console/console.h> > #include <arch/io.h> > #include <delay.h> > -#include "ec.h" > +#include <ec/acpi/ec.h> > +#include "ec_oem.h" > > -int send_ec_command(u8 command) > -{ > - int timeout; > - > - timeout = 0x7ff; > - while ((inb(EC_SC) & EC_IBF) && --timeout) { > - udelay(10); > - if ((timeout & 0xff) == 0) > - printk(BIOS_SPEW, "."); > - } > - if (!timeout) { > - printk(BIOS_DEBUG, "Timeout while sending command 0x%02x to EC!\n", > - command); > - // return -1; > - } > - > - outb(command, EC_SC); > - return 0; > -} > - > -int send_ec_data(u8 data) > -{ > - int timeout; > - > - timeout = 0x7ff; > - while ((inb(EC_SC) & EC_IBF) && --timeout) { // wait for IBF = 0 > - udelay(10); > - if ((timeout & 0xff) == 0) > - printk(BIOS_SPEW, "."); > - } > - if (!timeout) { > - printk(BIOS_DEBUG, "Timeout while sending data 0x%02x to EC!\n", > - data); > - // return -1; > - } > - > - outb(data, EC_DATA); > - > - return 0; > -} > - > -int send_ec_data_nowait(u8 data) > -{ > - outb(data, EC_DATA); > - > - return 0; > -} > - > -u8 recv_ec_data(void) > -{ > - int timeout; > - u8 data; > - > - timeout = 0x7fff; > - while (--timeout) { // Wait for OBF = 1 > - if (inb(EC_SC) & EC_OBF) { > - break; > - } > - udelay(10); > - if ((timeout & 0xff) == 0) > - printk(BIOS_SPEW, "."); > - } > - if (!timeout) { > - printk(BIOS_DEBUG, "\nTimeout while receiving data from EC!\n"); > - // return -1; > - } > - > - data = inb(EC_DATA); > - printk(BIOS_SPEW, "recv_ec_data: 0x%02x\n", data); > - > - return data; > -} > - > -u8 ec_read(u8 addr) > -{ > - send_ec_command(0x80); > - send_ec_data(addr); > - > - return recv_ec_data(); > -} > - > -int ec_write(u8 addr, u8 data) > -{ > - send_ec_command(0x81); > - send_ec_data(addr); > - return send_ec_data(data); > -} > - > -int ec_dump_status(void) > -{ > - u8 ec_sc = inb(EC_SC); > - printk(BIOS_DEBUG, "Embedded Controller Status: "); > - if (ec_sc & (1 << 6)) printk(BIOS_DEBUG, "SMI_EVT "); > - if (ec_sc & (1 << 5)) printk(BIOS_DEBUG, "SCI_EVT "); > - if (ec_sc & (1 << 4)) printk(BIOS_DEBUG, "BURST "); > - if (ec_sc & (1 << 3)) printk(BIOS_DEBUG, "CMD "); > - if (ec_sc & (1 << 1)) printk(BIOS_DEBUG, "IBF "); > - if (ec_sc & (1 << 0)) printk(BIOS_DEBUG, "OBF "); > - printk(BIOS_DEBUG, "\n"); > - > - return ec_sc; > -} > - > - > -/* ********************************** */ > - > int send_ec_oem_command(u8 command) > { > int timeout; > Index: src/mainboard/getac/p470/mainboard.c > =================================================================== > --- src/mainboard/getac/p470/mainboard.c (revision 6275) > +++ src/mainboard/getac/p470/mainboard.c (working copy) > @@ -28,7 +28,7 @@ > #include "chip.h" > #include "hda_verb.h" > > -#include "ec.c" > +#include "ec_oem.c" > > #define MAX_LCD_BRIGHTNESS 0xd8 > > Index: src/mainboard/getac/p470/ec.h > =================================================================== > --- src/mainboard/getac/p470/ec.h (revision 6275) > +++ src/mainboard/getac/p470/ec.h (working copy) > @@ -1,64 +0,0 @@ > -/* > - * This file is part of the coreboot project. > - * > - * Copyright (C) 2008-2009 coresystems GmbH > - * > - * This program is free software; you can redistribute it and/or > - * modify it under the terms of the GNU General Public License as > - * published by the Free Software Foundation; version 2 of > - * the License. > - * > - * This program is distributed in the hope that it will be useful, > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > - * GNU General Public License for more details. > - * > - * You should have received a copy of the GNU General Public License > - * along with this program; if not, write to the Free Software > - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, > - * MA 02110-1301 USA > - */ > - > -#ifndef _MAINBOARD_EC_H > -#define _MAINBOARD_EC_H > - > -#define EC_DATA 0x62 > -#define EC_SC 0x66 > - > - > -#define EC_OEM_DATA 0x68 > -#define EC_OEM_SC 0x6c > - > -/* EC_SC input */ > -#define EC_SMI_EVT (1 << 6) // 1: SMI event pending > -#define EC_SCI_EVT (1 << 5) // 1: SCI event pending > -#define EC_BURST (1 << 4) // controller is in burst mode > -#define EC_CMD (1 << 3) // 1: byte in data register is command > - // 0: byte in data register is data > -#define EC_IBF (1 << 1) // 1: input buffer full (data ready for ec) > -#define EC_OBF (1 << 0) // 1: output buffer full (data ready for host) > -/* EC_SC output */ > -#define RD_EC 0x80 // Read Embedded Controller > -#define WR_EC 0x81 // Write Embedded Controller > -#define BE_EC 0x82 // Burst Enable Embedded Controller > -#define BD_EC 0x83 // Burst Disable Embedded Controller > -#define QR_EC 0x84 // Query Embedded Controller > - > -int send_ec_command(u8 command); > -int send_ec_data(u8 data); > -int send_ec_data_nowait(u8 data); > -u8 recv_ec_data(void); > -u8 ec_read(u8 addr); > -int ec_write(u8 addr, u8 data); > - > -int send_ec_oem_command(u8 command); > -int send_ec_oem_data(u8 data); > -int send_ec_oem_data_nowait(u8 data); > -u8 recv_ec_oem_data(void); > -u8 ec_oem_read(u8 addr); > -int ec_oem_write(u8 addr, u8 data); > - > -int ec_dump_status(void); > -int ec_oem_dump_status(void); > -#endif > - > Index: src/mainboard/getac/p470/ec_oem.h > =================================================================== > --- src/mainboard/getac/p470/ec_oem.h (revision 6275) > +++ src/mainboard/getac/p470/ec_oem.h (working copy) > @@ -19,13 +19,9 @@ > * MA 02110-1301 USA > */ > > -#ifndef _MAINBOARD_EC_H > -#define _MAINBOARD_EC_H > +#ifndef _MAINBOARD_EC_OEM_H > +#define _MAINBOARD_EC_OEM_H > > -#define EC_DATA 0x62 > -#define EC_SC 0x66 > - > - > #define EC_OEM_DATA 0x68 > #define EC_OEM_SC 0x6c > > @@ -44,13 +40,6 @@ > #define BD_EC 0x83 // Burst Disable Embedded Controller > #define QR_EC 0x84 // Query Embedded Controller > > -int send_ec_command(u8 command); > -int send_ec_data(u8 data); > -int send_ec_data_nowait(u8 data); > -u8 recv_ec_data(void); > -u8 ec_read(u8 addr); > -int ec_write(u8 addr, u8 data); > - > int send_ec_oem_command(u8 command); > int send_ec_oem_data(u8 data); > int send_ec_oem_data_nowait(u8 data); > Index: src/mainboard/roda/rk886ex/Makefile.inc > =================================================================== > --- src/mainboard/roda/rk886ex/Makefile.inc (revision 6275) > +++ src/mainboard/roda/rk886ex/Makefile.inc (working copy) > @@ -18,7 +18,6 @@ > ## > > ramstage-y += m3885.c > -ramstage-y += ec.c > driver-y += rtl8168.c > > smm-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.c > Index: src/mainboard/roda/rk886ex/mainboard_smi.c > =================================================================== > --- src/mainboard/roda/rk886ex/mainboard_smi.c (revision 6275) > +++ src/mainboard/roda/rk886ex/mainboard_smi.c (working copy) > @@ -24,6 +24,7 @@ > #include <console/console.h> > #include <cpu/x86/smm.h> > #include "southbridge/intel/i82801gx/nvs.h" > +#include "northbridge/intel/i945/udelay.c" > > /* The southbridge SMI handler checks whether gnvs has a > * valid pointer before calling the trap handler > Index: src/mainboard/roda/rk886ex/devicetree.cb > =================================================================== > --- src/mainboard/roda/rk886ex/devicetree.cb (revision 6275) > +++ src/mainboard/roda/rk886ex/devicetree.cb (working copy) > @@ -104,6 +104,8 @@ > device pnp ff.1 on # dummy address > end > end > + chip ec/acpi > + end > > end > #device pci 1f.1 off end # IDE > Index: src/mainboard/roda/rk886ex/m3885.c > =================================================================== > --- src/mainboard/roda/rk886ex/m3885.c (revision 6275) > +++ src/mainboard/roda/rk886ex/m3885.c (working copy) > @@ -25,7 +25,7 @@ > #include <arch/io.h> > #include <delay.h> > > -#include "ec.h" > +#include <ec/acpi/ec.h> > #include "m3885.h" > > #define TH0LOW 80 > Index: src/mainboard/roda/rk886ex/ec.c > =================================================================== > --- src/mainboard/roda/rk886ex/ec.c (revision 6275) > +++ src/mainboard/roda/rk886ex/ec.c (working copy) > @@ -1,114 +0,0 @@ > -/* > - * This file is part of the coreboot project. > - * > - * Copyright (C) 2008-2009 coresystems GmbH > - * > - * This program is free software; you can redistribute it and/or > - * modify it under the terms of the GNU General Public License as > - * published by the Free Software Foundation; version 2 of > - * the License. > - * > - * This program is distributed in the hope that it will be useful, > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > - * GNU General Public License for more details. > - * > - * You should have received a copy of the GNU General Public License > - * along with this program; if not, write to the Free Software > - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, > - * MA 02110-1301 USA > - */ > - > -#include <console/console.h> > -#include <arch/io.h> > -#include <delay.h> > -#include "ec.h" > - > -int send_ec_command(u8 command) > -{ > - int timeout; > - > - timeout = 0x7ff; > - while ((inb(EC_SC) & EC_IBF) && --timeout) { > - udelay(10); > - if ((timeout & 0xff) == 0) > - printk(BIOS_SPEW, "."); > - } > - if (!timeout) { > - printk(BIOS_DEBUG, "Timeout while sending command 0x%02x to EC!\n", > - command); > - // return -1; > - } > - > - outb(command, EC_SC); > - return 0; > -} > - > -int send_ec_data(u8 data) > -{ > - int timeout; > - > - timeout = 0x7ff; > - while ((inb(EC_SC) & EC_IBF) && --timeout) { // wait for IBF = 0 > - udelay(10); > - if ((timeout & 0xff) == 0) > - printk(BIOS_SPEW, "."); > - } > - if (!timeout) { > - printk(BIOS_DEBUG, "Timeout while sending data 0x%02x to EC!\n", > - data); > - // return -1; > - } > - > - outb(data, EC_DATA); > - > - return 0; > -} > - > -int send_ec_data_nowait(u8 data) > -{ > - outb(data, EC_DATA); > - > - return 0; > -} > - > -u8 recv_ec_data(void) > -{ > - int timeout; > - u8 data; > - > - timeout = 0x7fff; > - while (--timeout) { // Wait for OBF = 1 > - if (inb(EC_SC) & EC_OBF) { > - break; > - } > - udelay(10); > - if ((timeout & 0xff) == 0) > - printk(BIOS_SPEW, "."); > - } > - if (!timeout) { > - printk(BIOS_DEBUG, "\nTimeout while receiving data from EC!\n"); > - // return -1; > - } > - > - data = inb(EC_DATA); > - printk(BIOS_DEBUG, "recv_ec_data: 0x%02x\n", data); > - > - return data; > -} > - > -u8 ec_read(u8 addr) > -{ > - send_ec_command(0x80); > - send_ec_data(addr); > - > - return recv_ec_data(); > -} > - > -int ec_write(u8 addr, u8 data) > -{ > - send_ec_command(0x81); > - send_ec_data(addr); > - return send_ec_data(data); > -} > - > Index: src/mainboard/roda/rk886ex/mainboard.c > =================================================================== > --- src/mainboard/roda/rk886ex/mainboard.c (revision 6275) > +++ src/mainboard/roda/rk886ex/mainboard.c (working copy) > @@ -30,7 +30,7 @@ > #include <arch/coreboot_tables.h> > #include "chip.h" > > -#include "ec.h" > +#include <ec/acpi/ec.h> > #include "m3885.h" > > #define DUMP_RUNTIME_REGISTERS 0 > Index: src/mainboard/roda/rk886ex/ec.h > =================================================================== > --- src/mainboard/roda/rk886ex/ec.h (revision 6275) > +++ src/mainboard/roda/rk886ex/ec.h (working copy) > @@ -1,49 +0,0 @@ > -/* > - * This file is part of the coreboot project. > - * > - * Copyright (C) 2008-2009 coresystems GmbH > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU General Public License as published by > - * the Free Software Foundation; version 2 of the License. > - * > - * This program is distributed in the hope that it will be useful, > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > - * GNU General Public License for more details. > - * > - * You should have received a copy of the GNU General Public License > - * along with this program; if not, write to the Free Software > - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > - */ > - > -#ifndef _MAINBOARD_EC_H > -#define _MAINBOARD_EC_H > - > -#define EC_DATA 0x62 > -#define EC_SC 0x66 > - > -/* EC_SC input */ > -#define EC_SMI_EVT (1 << 6) // 1: SMI event pending > -#define EC_SCI_EVT (1 << 5) // 1: SCI event pending > -#define EC_BURST (1 << 4) // controller is in burst mode > -#define EC_CMD (1 << 3) // 1: byte in data register is command > - // 0: byte in data register is data > -#define EC_IBF (1 << 1) // 1: input buffer full (data ready for ec) > -#define EC_OBF (1 << 0) // 1: output buffer full (data ready for host) > -/* EC_SC output */ > -#define RD_EC 0x80 // Read Embedded Controller > -#define WR_EC 0x81 // Write Embedded Controller > -#define BE_EC 0x82 // Burst Enable Embedded Controller > -#define BD_EC 0x83 // Burst Disable Embedded Controller > -#define QR_EC 0x84 // Query Embedded Controller > - > -int send_ec_command(u8 command); > -int send_ec_data(u8 data); > -int send_ec_data_nowait(u8 data); > -u8 recv_ec_data(void); > -u8 ec_read(u8 addr); > -int ec_write(u8 addr, u8 data); > - > -#endif > - > Index: Makefile > =================================================================== > --- Makefile (revision 6275) > +++ Makefile (working copy) > @@ -123,7 +123,7 @@ > PLATFORM-y += src/arch/$(ARCHDIR-y) src/cpu src/mainboard/$(MAINBOARDDIR) > TARGETS-y := > > -BUILD-y := src/lib src/boot src/console src/devices src/southbridge src/northbridge src/superio src/drivers > +BUILD-y := src/lib src/boot src/console src/devices src/ec src/southbridge src/northbridge src/superio src/drivers > BUILD-y += util/cbfstool util/sconfig > BUILD-$(CONFIG_ARCH_X86) += src/pc80
Sven Schnelle wrote: > Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> r6304 > +++ src/mainboard/roda/rk886ex/mainboard_smi.c (working copy) > @@ -24,6 +24,7 @@ > #include <console/console.h> > #include <cpu/x86/smm.h> > #include "southbridge/intel/i82801gx/nvs.h" > +#include "northbridge/intel/i945/udelay.c" The need for the above hunk was removed by r6303, so I removed it from your patch. //Peter
Patch
Index: src/Kconfig =================================================================== --- src/Kconfig (revision 6275) +++ src/Kconfig (working copy) @@ -124,6 +124,8 @@ source src/superio/Kconfig comment "Devices" source src/devices/Kconfig +comment "Embedded Controllers" +source src/ec/Kconfig endmenu Index: src/ec/Kconfig =================================================================== --- src/ec/Kconfig (revision 0) +++ src/ec/Kconfig (revision 0) @@ -0,0 +1 @@ +source src/ec/acpi/Kconfig Index: src/ec/Makefile.inc =================================================================== --- src/ec/Makefile.inc (revision 0) +++ src/ec/Makefile.inc (revision 0) @@ -0,0 +1 @@ +subdirs-y += acpi Index: src/ec/acpi/Kconfig =================================================================== --- src/ec/acpi/Kconfig (revision 0) +++ src/ec/acpi/Kconfig (revision 0) @@ -0,0 +1,5 @@ +config EC_ACPI + bool + help + ACPI Embedded Controller interface. Mostly found + in latops. Index: src/ec/acpi/Makefile.inc =================================================================== --- src/ec/acpi/Makefile.inc (revision 0) +++ src/ec/acpi/Makefile.inc (revision 0) @@ -0,0 +1,2 @@ +ramstage-y += ec.c +smm-$(CONFIG_HAVE_SMI_HANDLER) += ec.c Index: src/ec/acpi/ec.c =================================================================== --- src/ec/acpi/ec.c (revision 0) +++ src/ec/acpi/ec.c (working copy) @@ -20,6 +20,7 @@ */ #include <console/console.h> +#include <device/device.h> #include <arch/io.h> #include <delay.h> #include "ec.h" @@ -112,3 +113,6 @@ return send_ec_data(data); } +struct chip_operations ec_acpi_ops = { + CHIP_NAME("ACPI Embedded Controller") +}; Index: src/ec/acpi/ec.h =================================================================== --- src/ec/acpi/ec.h (revision 0) +++ src/ec/acpi/ec.h (working copy) @@ -17,8 +17,8 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#ifndef _MAINBOARD_EC_H -#define _MAINBOARD_EC_H +#ifndef _EC_ACPI_H +#define _EC_ACPI_H #define EC_DATA 0x62 #define EC_SC 0x66 Index: src/mainboard/getac/p470/Kconfig =================================================================== --- src/mainboard/getac/p470/Kconfig (revision 6275) +++ src/mainboard/getac/p470/Kconfig (working copy) @@ -28,6 +28,7 @@ select SOUTHBRIDGE_TI_PCIXX12 select SUPERIO_SMSC_FDC37N972 select SUPERIO_SMSC_SIO10N268 + select EC_ACPI select BOARD_HAS_FADT select HAVE_ACPI_TABLES select HAVE_PIRQ_TABLE Index: src/mainboard/getac/p470/mainboard_smi.c =================================================================== --- src/mainboard/getac/p470/mainboard_smi.c (revision 6275) +++ src/mainboard/getac/p470/mainboard_smi.c (working copy) @@ -26,7 +26,8 @@ #include "southbridge/intel/i82801gx/i82801gx.h" #include "southbridge/intel/i82801gx/nvs.h" #include "northbridge/intel/i945/udelay.c" -#include "ec.c" +#include <ec/acpi/ec.h> +#include "ec_oem.c" #define MAX_LCD_BRIGHTNESS 0xd8 Index: src/mainboard/getac/p470/devicetree.cb =================================================================== --- src/mainboard/getac/p470/devicetree.cb (revision 6275) +++ src/mainboard/getac/p470/devicetree.cb (working copy) @@ -133,6 +133,8 @@ end device pnp 4e.b off # HWM end + chip ec/acpi + end end end Index: src/mainboard/getac/p470/ec.c =================================================================== --- src/mainboard/getac/p470/ec.c (revision 6275) +++ src/mainboard/getac/p470/ec.c (working copy) @@ -1,235 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/io.h> -#include <delay.h> -#include "ec.h" - -int send_ec_command(u8 command) -{ - int timeout; - - timeout = 0x7ff; - while ((inb(EC_SC) & EC_IBF) && --timeout) { - udelay(10); - if ((timeout & 0xff) == 0) - printk(BIOS_SPEW, "."); - } - if (!timeout) { - printk(BIOS_DEBUG, "Timeout while sending command 0x%02x to EC!\n", - command); - // return -1; - } - - outb(command, EC_SC); - return 0; -} - -int send_ec_data(u8 data) -{ - int timeout; - - timeout = 0x7ff; - while ((inb(EC_SC) & EC_IBF) && --timeout) { // wait for IBF = 0 - udelay(10); - if ((timeout & 0xff) == 0) - printk(BIOS_SPEW, "."); - } - if (!timeout) { - printk(BIOS_DEBUG, "Timeout while sending data 0x%02x to EC!\n", - data); - // return -1; - } - - outb(data, EC_DATA); - - return 0; -} - -int send_ec_data_nowait(u8 data) -{ - outb(data, EC_DATA); - - return 0; -} - -u8 recv_ec_data(void) -{ - int timeout; - u8 data; - - timeout = 0x7fff; - while (--timeout) { // Wait for OBF = 1 - if (inb(EC_SC) & EC_OBF) { - break; - } - udelay(10); - if ((timeout & 0xff) == 0) - printk(BIOS_SPEW, "."); - } - if (!timeout) { - printk(BIOS_DEBUG, "\nTimeout while receiving data from EC!\n"); - // return -1; - } - - data = inb(EC_DATA); - printk(BIOS_SPEW, "recv_ec_data: 0x%02x\n", data); - - return data; -} - -u8 ec_read(u8 addr) -{ - send_ec_command(0x80); - send_ec_data(addr); - - return recv_ec_data(); -} - -int ec_write(u8 addr, u8 data) -{ - send_ec_command(0x81); - send_ec_data(addr); - return send_ec_data(data); -} - -int ec_dump_status(void) -{ - u8 ec_sc = inb(EC_SC); - printk(BIOS_DEBUG, "Embedded Controller Status: "); - if (ec_sc & (1 << 6)) printk(BIOS_DEBUG, "SMI_EVT "); - if (ec_sc & (1 << 5)) printk(BIOS_DEBUG, "SCI_EVT "); - if (ec_sc & (1 << 4)) printk(BIOS_DEBUG, "BURST "); - if (ec_sc & (1 << 3)) printk(BIOS_DEBUG, "CMD "); - if (ec_sc & (1 << 1)) printk(BIOS_DEBUG, "IBF "); - if (ec_sc & (1 << 0)) printk(BIOS_DEBUG, "OBF "); - printk(BIOS_DEBUG, "\n"); - - return ec_sc; -} - - -/* ********************************** */ - -int send_ec_oem_command(u8 command) -{ - int timeout; - - timeout = 0x7ff; - while ((inb(EC_OEM_SC) & EC_IBF) && --timeout) { - udelay(10); - if ((timeout & 0xff) == 0) - printk(BIOS_SPEW, "."); - } - if (!timeout) { - printk(BIOS_DEBUG, "Timeout while sending OEM command 0x%02x to EC!\n", - command); - // return -1; - } - - outb(command, EC_OEM_SC); - return 0; -} - -int send_ec_oem_data(u8 data) -{ - int timeout; - - timeout = 0x7ff; - while ((inb(EC_OEM_SC) & EC_IBF) && --timeout) { // wait for IBF = 0 - udelay(10); - if ((timeout & 0xff) == 0) - printk(BIOS_SPEW, "."); - } - if (!timeout) { - printk(BIOS_DEBUG, "Timeout while sending OEM data 0x%02x to EC!\n", - data); - // return -1; - } - - outb(data, EC_OEM_DATA); - - return 0; -} - -int send_ec_oem_data_nowait(u8 data) -{ - outb(data, EC_OEM_DATA); - - return 0; -} - -u8 recv_ec_oem_data(void) -{ - int timeout; - u8 data; - - timeout = 0x7fff; - while (--timeout) { // Wait for OBF = 1 - if (inb(EC_OEM_SC) & EC_OBF) { - break; - } - udelay(10); - if ((timeout & 0xff) == 0) - printk(BIOS_SPEW, "."); - } - if (!timeout) { - printk(BIOS_DEBUG, "\nTimeout while receiving OEM data from EC!\n"); - // return -1; - } - - data = inb(EC_OEM_DATA); - // printk(BIOS_SPEW, "recv_ec_oem_data: 0x%02x\n", data); - - return data; -} - -u8 ec_oem_read(u8 addr) -{ - send_ec_oem_command(0x80); - send_ec_oem_data(addr); - - return recv_ec_oem_data(); -} - -int ec_oem_write(u8 addr, u8 data) -{ - send_ec_oem_command(0x81); - send_ec_oem_data(addr); - return send_ec_oem_data(data); -} - -int ec_oem_dump_status(void) -{ - u8 ec_sc = inb(EC_OEM_SC); - printk(BIOS_DEBUG, "Embedded Controller Status: "); - if (ec_sc & (1 << 6)) printk(BIOS_DEBUG, "SMI_EVT "); - if (ec_sc & (1 << 5)) printk(BIOS_DEBUG, "SCI_EVT "); - if (ec_sc & (1 << 4)) printk(BIOS_DEBUG, "BURST "); - if (ec_sc & (1 << 3)) printk(BIOS_DEBUG, "CMD "); - if (ec_sc & (1 << 1)) printk(BIOS_DEBUG, "IBF "); - if (ec_sc & (1 << 0)) printk(BIOS_DEBUG, "OBF "); - printk(BIOS_DEBUG, "\n"); - - return ec_sc; -} - Index: src/mainboard/getac/p470/ec_oem.c =================================================================== --- src/mainboard/getac/p470/ec_oem.c (revision 6275) +++ src/mainboard/getac/p470/ec_oem.c (working copy) @@ -22,114 +22,9 @@ #include <console/console.h> #include <arch/io.h> #include <delay.h> -#include "ec.h" +#include <ec/acpi/ec.h> +#include "ec_oem.h" -int send_ec_command(u8 command) -{ - int timeout; - - timeout = 0x7ff; - while ((inb(EC_SC) & EC_IBF) && --timeout) { - udelay(10); - if ((timeout & 0xff) == 0) - printk(BIOS_SPEW, "."); - } - if (!timeout) { - printk(BIOS_DEBUG, "Timeout while sending command 0x%02x to EC!\n", - command); - // return -1; - } - - outb(command, EC_SC); - return 0; -} - -int send_ec_data(u8 data) -{ - int timeout; - - timeout = 0x7ff; - while ((inb(EC_SC) & EC_IBF) && --timeout) { // wait for IBF = 0 - udelay(10); - if ((timeout & 0xff) == 0) - printk(BIOS_SPEW, "."); - } - if (!timeout) { - printk(BIOS_DEBUG, "Timeout while sending data 0x%02x to EC!\n", - data); - // return -1; - } - - outb(data, EC_DATA); - - return 0; -} - -int send_ec_data_nowait(u8 data) -{ - outb(data, EC_DATA); - - return 0; -} - -u8 recv_ec_data(void) -{ - int timeout; - u8 data; - - timeout = 0x7fff; - while (--timeout) { // Wait for OBF = 1 - if (inb(EC_SC) & EC_OBF) { - break; - } - udelay(10); - if ((timeout & 0xff) == 0) - printk(BIOS_SPEW, "."); - } - if (!timeout) { - printk(BIOS_DEBUG, "\nTimeout while receiving data from EC!\n"); - // return -1; - } - - data = inb(EC_DATA); - printk(BIOS_SPEW, "recv_ec_data: 0x%02x\n", data); - - return data; -} - -u8 ec_read(u8 addr) -{ - send_ec_command(0x80); - send_ec_data(addr); - - return recv_ec_data(); -} - -int ec_write(u8 addr, u8 data) -{ - send_ec_command(0x81); - send_ec_data(addr); - return send_ec_data(data); -} - -int ec_dump_status(void) -{ - u8 ec_sc = inb(EC_SC); - printk(BIOS_DEBUG, "Embedded Controller Status: "); - if (ec_sc & (1 << 6)) printk(BIOS_DEBUG, "SMI_EVT "); - if (ec_sc & (1 << 5)) printk(BIOS_DEBUG, "SCI_EVT "); - if (ec_sc & (1 << 4)) printk(BIOS_DEBUG, "BURST "); - if (ec_sc & (1 << 3)) printk(BIOS_DEBUG, "CMD "); - if (ec_sc & (1 << 1)) printk(BIOS_DEBUG, "IBF "); - if (ec_sc & (1 << 0)) printk(BIOS_DEBUG, "OBF "); - printk(BIOS_DEBUG, "\n"); - - return ec_sc; -} - - -/* ********************************** */ - int send_ec_oem_command(u8 command) { int timeout; Index: src/mainboard/getac/p470/mainboard.c =================================================================== --- src/mainboard/getac/p470/mainboard.c (revision 6275) +++ src/mainboard/getac/p470/mainboard.c (working copy) @@ -28,7 +28,7 @@ #include "chip.h" #include "hda_verb.h" -#include "ec.c" +#include "ec_oem.c" #define MAX_LCD_BRIGHTNESS 0xd8 Index: src/mainboard/getac/p470/ec.h =================================================================== --- src/mainboard/getac/p470/ec.h (revision 6275) +++ src/mainboard/getac/p470/ec.h (working copy) @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef _MAINBOARD_EC_H -#define _MAINBOARD_EC_H - -#define EC_DATA 0x62 -#define EC_SC 0x66 - - -#define EC_OEM_DATA 0x68 -#define EC_OEM_SC 0x6c - -/* EC_SC input */ -#define EC_SMI_EVT (1 << 6) // 1: SMI event pending -#define EC_SCI_EVT (1 << 5) // 1: SCI event pending -#define EC_BURST (1 << 4) // controller is in burst mode -#define EC_CMD (1 << 3) // 1: byte in data register is command - // 0: byte in data register is data -#define EC_IBF (1 << 1) // 1: input buffer full (data ready for ec) -#define EC_OBF (1 << 0) // 1: output buffer full (data ready for host) -/* EC_SC output */ -#define RD_EC 0x80 // Read Embedded Controller -#define WR_EC 0x81 // Write Embedded Controller -#define BE_EC 0x82 // Burst Enable Embedded Controller -#define BD_EC 0x83 // Burst Disable Embedded Controller -#define QR_EC 0x84 // Query Embedded Controller - -int send_ec_command(u8 command); -int send_ec_data(u8 data); -int send_ec_data_nowait(u8 data); -u8 recv_ec_data(void); -u8 ec_read(u8 addr); -int ec_write(u8 addr, u8 data); - -int send_ec_oem_command(u8 command); -int send_ec_oem_data(u8 data); -int send_ec_oem_data_nowait(u8 data); -u8 recv_ec_oem_data(void); -u8 ec_oem_read(u8 addr); -int ec_oem_write(u8 addr, u8 data); - -int ec_dump_status(void); -int ec_oem_dump_status(void); -#endif - Index: src/mainboard/getac/p470/ec_oem.h =================================================================== --- src/mainboard/getac/p470/ec_oem.h (revision 6275) +++ src/mainboard/getac/p470/ec_oem.h (working copy) @@ -19,13 +19,9 @@ * MA 02110-1301 USA */ -#ifndef _MAINBOARD_EC_H -#define _MAINBOARD_EC_H +#ifndef _MAINBOARD_EC_OEM_H +#define _MAINBOARD_EC_OEM_H -#define EC_DATA 0x62 -#define EC_SC 0x66 - - #define EC_OEM_DATA 0x68 #define EC_OEM_SC 0x6c @@ -44,13 +40,6 @@ #define BD_EC 0x83 // Burst Disable Embedded Controller #define QR_EC 0x84 // Query Embedded Controller -int send_ec_command(u8 command); -int send_ec_data(u8 data); -int send_ec_data_nowait(u8 data); -u8 recv_ec_data(void); -u8 ec_read(u8 addr); -int ec_write(u8 addr, u8 data); - int send_ec_oem_command(u8 command); int send_ec_oem_data(u8 data); int send_ec_oem_data_nowait(u8 data); Index: src/mainboard/roda/rk886ex/Makefile.inc =================================================================== --- src/mainboard/roda/rk886ex/Makefile.inc (revision 6275) +++ src/mainboard/roda/rk886ex/Makefile.inc (working copy) @@ -18,7 +18,6 @@ ## ramstage-y += m3885.c -ramstage-y += ec.c driver-y += rtl8168.c smm-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.c Index: src/mainboard/roda/rk886ex/mainboard_smi.c =================================================================== --- src/mainboard/roda/rk886ex/mainboard_smi.c (revision 6275) +++ src/mainboard/roda/rk886ex/mainboard_smi.c (working copy) @@ -24,6 +24,7 @@ #include <console/console.h> #include <cpu/x86/smm.h> #include "southbridge/intel/i82801gx/nvs.h" +#include "northbridge/intel/i945/udelay.c" /* The southbridge SMI handler checks whether gnvs has a * valid pointer before calling the trap handler Index: src/mainboard/roda/rk886ex/devicetree.cb =================================================================== --- src/mainboard/roda/rk886ex/devicetree.cb (revision 6275) +++ src/mainboard/roda/rk886ex/devicetree.cb (working copy) @@ -104,6 +104,8 @@ device pnp ff.1 on # dummy address end end + chip ec/acpi + end end #device pci 1f.1 off end # IDE Index: src/mainboard/roda/rk886ex/m3885.c =================================================================== --- src/mainboard/roda/rk886ex/m3885.c (revision 6275) +++ src/mainboard/roda/rk886ex/m3885.c (working copy) @@ -25,7 +25,7 @@ #include <arch/io.h> #include <delay.h> -#include "ec.h" +#include <ec/acpi/ec.h> #include "m3885.h" #define TH0LOW 80 Index: src/mainboard/roda/rk886ex/ec.c =================================================================== --- src/mainboard/roda/rk886ex/ec.c (revision 6275) +++ src/mainboard/roda/rk886ex/ec.c (working copy) @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/io.h> -#include <delay.h> -#include "ec.h" - -int send_ec_command(u8 command) -{ - int timeout; - - timeout = 0x7ff; - while ((inb(EC_SC) & EC_IBF) && --timeout) { - udelay(10); - if ((timeout & 0xff) == 0) - printk(BIOS_SPEW, "."); - } - if (!timeout) { - printk(BIOS_DEBUG, "Timeout while sending command 0x%02x to EC!\n", - command); - // return -1; - } - - outb(command, EC_SC); - return 0; -} - -int send_ec_data(u8 data) -{ - int timeout; - - timeout = 0x7ff; - while ((inb(EC_SC) & EC_IBF) && --timeout) { // wait for IBF = 0 - udelay(10); - if ((timeout & 0xff) == 0) - printk(BIOS_SPEW, "."); - } - if (!timeout) { - printk(BIOS_DEBUG, "Timeout while sending data 0x%02x to EC!\n", - data); - // return -1; - } - - outb(data, EC_DATA); - - return 0; -} - -int send_ec_data_nowait(u8 data) -{ - outb(data, EC_DATA); - - return 0; -} - -u8 recv_ec_data(void) -{ - int timeout; - u8 data; - - timeout = 0x7fff; - while (--timeout) { // Wait for OBF = 1 - if (inb(EC_SC) & EC_OBF) { - break; - } - udelay(10); - if ((timeout & 0xff) == 0) - printk(BIOS_SPEW, "."); - } - if (!timeout) { - printk(BIOS_DEBUG, "\nTimeout while receiving data from EC!\n"); - // return -1; - } - - data = inb(EC_DATA); - printk(BIOS_DEBUG, "recv_ec_data: 0x%02x\n", data); - - return data; -} - -u8 ec_read(u8 addr) -{ - send_ec_command(0x80); - send_ec_data(addr); - - return recv_ec_data(); -} - -int ec_write(u8 addr, u8 data) -{ - send_ec_command(0x81); - send_ec_data(addr); - return send_ec_data(data); -} - Index: src/mainboard/roda/rk886ex/mainboard.c =================================================================== --- src/mainboard/roda/rk886ex/mainboard.c (revision 6275) +++ src/mainboard/roda/rk886ex/mainboard.c (working copy) @@ -30,7 +30,7 @@ #include <arch/coreboot_tables.h> #include "chip.h" -#include "ec.h" +#include <ec/acpi/ec.h> #include "m3885.h" #define DUMP_RUNTIME_REGISTERS 0 Index: src/mainboard/roda/rk886ex/ec.h =================================================================== --- src/mainboard/roda/rk886ex/ec.h (revision 6275) +++ src/mainboard/roda/rk886ex/ec.h (working copy) @@ -1,49 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _MAINBOARD_EC_H -#define _MAINBOARD_EC_H - -#define EC_DATA 0x62 -#define EC_SC 0x66 - -/* EC_SC input */ -#define EC_SMI_EVT (1 << 6) // 1: SMI event pending -#define EC_SCI_EVT (1 << 5) // 1: SCI event pending -#define EC_BURST (1 << 4) // controller is in burst mode -#define EC_CMD (1 << 3) // 1: byte in data register is command - // 0: byte in data register is data -#define EC_IBF (1 << 1) // 1: input buffer full (data ready for ec) -#define EC_OBF (1 << 0) // 1: output buffer full (data ready for host) -/* EC_SC output */ -#define RD_EC 0x80 // Read Embedded Controller -#define WR_EC 0x81 // Write Embedded Controller -#define BE_EC 0x82 // Burst Enable Embedded Controller -#define BD_EC 0x83 // Burst Disable Embedded Controller -#define QR_EC 0x84 // Query Embedded Controller - -int send_ec_command(u8 command); -int send_ec_data(u8 data); -int send_ec_data_nowait(u8 data); -u8 recv_ec_data(void); -u8 ec_read(u8 addr); -int ec_write(u8 addr, u8 data); - -#endif - Index: Makefile =================================================================== --- Makefile (revision 6275) +++ Makefile (working copy) @@ -123,7 +123,7 @@ PLATFORM-y += src/arch/$(ARCHDIR-y) src/cpu src/mainboard/$(MAINBOARDDIR) TARGETS-y := -BUILD-y := src/lib src/boot src/console src/devices src/southbridge src/northbridge src/superio src/drivers +BUILD-y := src/lib src/boot src/console src/devices src/ec src/southbridge src/northbridge src/superio src/drivers BUILD-y += util/cbfstool util/sconfig BUILD-$(CONFIG_ARCH_X86) += src/pc80