Comments
Patch
===================================================================
@@ -146,6 +146,14 @@
bool
default y
+config HAVE_FAILOVER_BOOT
+ bool
+ default n
+
+config USE_FAILOVER_IMAGE
+ bool
+ default n
+
config HAVE_HARD_RESET
bool
default 0
===================================================================
@@ -76,16 +76,6 @@
default 0x100000
depends on BOARD_SUPERMICRO_H8DME
-config HAVE_FAILOVER_BOOT
- bool
- default n
- depends on BOARD_SUPERMICRO_H8DME
-
-config USE_FAILOVER_IMAGE
- bool
- default n
- depends on BOARD_SUPERMICRO_H8DME
-
config MAX_CPUS
int
default 4
===================================================================
@@ -72,16 +72,6 @@
default y
depends on BOARD_AMD_SERENGETI_CHEETAH
-config HAVE_FAILOVER_BOOT
- bool
- default n
- depends on BOARD_AMD_SERENGETI_CHEETAH
-
-config USE_FAILOVER_IMAGE
- bool
- default n
- depends on BOARD_AMD_SERENGETI_CHEETAH
-
config MAX_CPUS
int
default 8
===================================================================
@@ -39,16 +39,6 @@
default 0x100000
depends on BOARD_TYAN_S2850
-config HAVE_FAILOVER_BOOT
- bool
- default n
- depends on BOARD_TYAN_S2850
-
-config USE_FAILOVER_IMAGE
- bool
- default n
- depends on BOARD_TYAN_S2850
-
config MAX_CPUS
int
default 2
===================================================================
@@ -45,11 +45,6 @@
default 0x2881
depends on BOARD_TYAN_S2881
-config USE_FAILOVER_IMAGE
- bool
- default n
- depends on BOARD_TYAN_S2881
-
config HW_MEM_HOLE_SIZEK
hex
default 0x100000
@@ -60,16 +55,6 @@
default n
depends on BOARD_TYAN_S2881
-config HAVE_FAILOVER_BOOT
- bool
- default n
- depends on BOARD_TYAN_S2881
-
-config USE_FAILOVER_IMAGE
- bool
- default n
- depends on BOARD_TYAN_S2881
-
config MAX_CPUS
int
default 4
===================================================================
@@ -45,11 +45,6 @@
default 0x2891
depends on BOARD_TYAN_S2891
-config USE_FAILOVER_IMAGE
- bool
- default n
- depends on BOARD_TYAN_S2891
-
config HW_MEM_HOLE_SIZEK
hex
default 0x100000
@@ -60,16 +55,6 @@
default n
depends on BOARD_TYAN_S2891
-config HAVE_FAILOVER_BOOT
- bool
- default n
- depends on BOARD_TYAN_S2891
-
-config USE_FAILOVER_IMAGE
- bool
- default n
- depends on BOARD_TYAN_S2891
-
config MAX_CPUS
int
default 4
===================================================================
@@ -45,11 +45,6 @@
default 0x2892
depends on BOARD_TYAN_S2892
-config USE_FAILOVER_IMAGE
- bool
- default n
- depends on BOARD_TYAN_S2892
-
config HW_MEM_HOLE_SIZEK
hex
default 0x100000
@@ -60,16 +55,6 @@
default n
depends on BOARD_TYAN_S2892
-config HAVE_FAILOVER_BOOT
- bool
- default n
- depends on BOARD_TYAN_S2892
-
-config USE_FAILOVER_IMAGE
- bool
- default n
- depends on BOARD_TYAN_S2892
-
config MAX_CPUS
int
default 4
===================================================================
@@ -40,16 +40,6 @@
default 0x100000
depends on BOARD_TYAN_S2875
-config HAVE_FAILOVER_BOOT
- bool
- default n
- depends on BOARD_TYAN_S2875
-
-config USE_FAILOVER_IMAGE
- bool
- default n
- depends on BOARD_TYAN_S2875
-
config MAX_CPUS
int
default 4
===================================================================
@@ -45,11 +45,6 @@
default 0x2895
depends on BOARD_TYAN_S2895
-config USE_FAILOVER_IMAGE
- bool
- default n
- depends on BOARD_TYAN_S2895
-
config HW_MEM_HOLE_SIZEK
hex
default 0x100000
@@ -60,16 +55,6 @@
default n
depends on BOARD_TYAN_S2895
-config HAVE_FAILOVER_BOOT
- bool
- default n
- depends on BOARD_TYAN_S2895
-
-config USE_FAILOVER_IMAGE
- bool
- default n
- depends on BOARD_TYAN_S2895
-
config MAX_CPUS
int
default 4
===================================================================
@@ -33,21 +33,6 @@
default 0x016c
depends on BOARD_DELL_S1850
-config USE_FAILOVER_IMAGE
- bool
- default n
- depends on BOARD_DELL_S1850
-
-config HAVE_FAILOVER_BOOT
- bool
- default n
- depends on BOARD_DELL_S1850
-
-config USE_FAILOVER_IMAGE
- bool
- default n
- depends on BOARD_DELL_S1850
-
config MAX_CPUS
int
default 2
===================================================================
@@ -76,16 +76,6 @@
default 0x100000
depends on BOARD_SUNW_ULTRA40
-config HAVE_FAILOVER_BOOT
- bool
- default n
- depends on BOARD_SUNW_ULTRA40
-
-config USE_FAILOVER_IMAGE
- bool
- default n
- depends on BOARD_SUNW_ULTRA40
-
config MAX_CPUS
int
default 4
Hi, attached patch moves the failover configuration symbols to a global file, defined as bool, defaulting to false. Given that Kconfig doesn't support failover, there hardly will be a reason to enable it, and if there is, they can still be enabled as needed. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>