Patchwork Initial support for Marvell 88SE94xx v1

login
register
about
Submitter Carl-Daniel Hailfinger
Date 2014-04-28 06:45:14
Message ID <535DF8FA.8030804@gmx.net>
Download mbox | patch
Permalink /patch/4132/
State Superseded
Headers show

Comments

Carl-Daniel Hailfinger - 2014-04-28 06:45:14
Am 27.04.2014 05:22 schrieb Stefan Tauner:
> On Sun, 27 Apr 2014 02:14:24 +0200
> Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> wrote:
>
>> Index: flashrom-satamv_spi_mv94xx/programmer.h
>> ===================================================================
>> --- flashrom-satamv_spi_mv94xx/programmer.h	(Revision 1780)
>> +++ flashrom-satamv_spi_mv94xx/programmer.h	(Arbeitskopie)
>> @@ -527,6 +527,7 @@
>>  #if CONFIG_USBBLASTER_SPI == 1
>>  	SPI_CONTROLLER_USBBLASTER,
>>  #endif
>> +	SPI_CONTROLLER_SATAMV,
>>  };
> Needs to be guarded too IMHO

Definitely, thanks for catching this. The arch dependencies on
i386/x86_64 are broken as well, but I don't have a quick fix for this
because one half of the driver has the dependency, the other half doesn't.

Amit confirmed that probe works: "Found Winbond flash chip "W25X40" (512
kB, SPI) on satamv." However, reading failed due to incorrect limits in
max_data_read and max_data_write.

New version, read should work fine. Write might work, but I'd rather
wait a bit for that unless we know the image is correct and the flash
chip can be accessed easily with another external programmer.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Amit Uttamchandani - 2014-04-28 18:00:41
On Mon, Apr 28, 2014 at 08:45:14AM +0200, Carl-Daniel Hailfinger wrote:

> Amit confirmed that probe works: "Found Winbond flash chip "W25X40" (512
> kB, SPI) on satamv." However, reading failed due to incorrect limits in
> max_data_read and max_data_write.
> 
> New version, read should work fine. Write might work, but I'd rather
> wait a bit for that unless we know the image is correct and the flash
> chip can be accessed easily with another external programmer.
> 
> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
> 

Thanks for the latest patch! Read works as expected, the file I read
looks good.

Write does not work as of yet. Here is the output:

$ sudo ./flashrom -p satamv -w 9445_rev5.bin
flashrom v0.9.7-r1769 on Linux 3.2.48-logicube-ng.16-bfq (x86_64)
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.
Found Winbond flash chip "W25X40" (512 kB, SPI) on satamv.
Reading old flash chip contents... done.
Erasing and writing flash chip... FAILED at 0x00000000! Expected=0xff, Found=0x55, failed byte count from 0x00000000-0x00000fff: 0xf37
ERASE FAILED!
Reading current flash chip contents... done. FAILED at 0x00000000! Expected=0xff, Found=0x55, failed byte count from 0x00000000-0x0000ffff: 0xfcd0
ERASE FAILED!
Reading current flash chip contents... done. FAILED at 0x00000000! Expected=0xff, Found=0x55, failed byte count from 0x00000000-0x0007ffff: 0x25de9
ERASE FAILED!
FAILED!
Uh oh. Erase/write failed. Checking if anything changed.
Good. It seems nothing was changed.
Writing to the flash chip apparently didn't do anything.
Please check the connections (especially those to write protection pins) between
the programmer and the flash chip. If you think the error is caused by flashrom
please report this on IRC at chat.freenode.net (channel #flashrom) or
mail flashrom@flashrom.org, thanks!

Patch

Index: flashrom-satamv_spi_mv94xx/satamv.c
===================================================================
--- flashrom-satamv_spi_mv94xx/satamv.c	(Revision 1780)
+++ flashrom-satamv_spi_mv94xx/satamv.c	(Arbeitskopie)
@@ -1,8 +1,8 @@ 
 /*
  * This file is part of the flashrom project.
  *
- * Copyright (C) 2010,2011 Carl-Daniel Hailfinger
- * Written by Carl-Daniel Hailfinger for Angelbird Ltd.
+ * Copyright (C) 2010,2011,2014 Carl-Daniel Hailfinger
+ * Parts written by Carl-Daniel Hailfinger 2010, 2011 for Angelbird Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -19,12 +19,20 @@ 
  */
 
 /* Datasheets are not public (yet?) */
+
+// FIXME: This arch limitation is only valid for the 88SX60 series due to I/O port access
 #if defined(__i386__) || defined(__x86_64__)
 
 #include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/stat.h>
 #include "flash.h"
 #include "programmer.h"
+#include "chipdrivers.h"
 #include "hwaccess.h"
+#include "spi.h"
+#include <unistd.h>
 
 uint8_t *mv_bar;
 uint16_t mv_iobar;
@@ -32,20 +40,44 @@ 
 const struct dev_entry satas_mv[] = {
 	/* 88SX6041 and 88SX6042 are the same according to the datasheet. */
 	{0x11ab, 0x7042, OK, "Marvell", "88SX7042 PCI-e 4-port SATA-II"},
+	{0x1b4b, 0x9445, OK, "Marvell", "88SE9445 PCI-e 4-port SAS/SATA 6 Gbps"},
 
 	{0},
 };
 
 #define NVRAM_PARAM			0x1045c
 #define FLASH_PARAM			0x1046c
+#define EXPANSION_ROM_WINDOW0_REMAP	0x004c8
+#define MV94XX_SPI_CONTROL		0x0c800
+#define MV94XX_SPI_ADDRESS		0x0c804
+#define MV94XX_SPI_WRITE_DATA		0x0c808
+#define MV94XX_SPI_READ_DATA		0x0c80c
 #define EXPANSION_ROM_BAR_CONTROL	0x00d2c
 #define PCI_BAR2_CONTROL		0x00c08
 #define GPIO_PORT_CONTROL		0x104f0
 
+#define MV94XX_SPI_DATA_DIR_READ	(1 << 2)
+#define MV94XX_SPI_ADDR_PHASE		(1 << 1)
+#define MV94XX_SPI_START		(1 << 0)
+
+static int satamv_spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt,
+				   const unsigned char *writearr, unsigned char *readarr);
 static void satamv_chip_writeb(const struct flashctx *flash, uint8_t val,
 			       chipaddr addr);
 static uint8_t satamv_chip_readb(const struct flashctx *flash,
 				 const chipaddr addr);
+
+static const struct spi_programmer spi_programmer_satamv = {
+	.type		= SPI_CONTROLLER_SATAMV,
+	.max_data_read	= 4,
+	.max_data_write	= 4,
+	.command	= satamv_spi_send_command,
+	.multicommand	= default_spi_send_multicommand,
+	.read		= default_spi_read,
+	.write_256	= default_spi_write_256,
+	.write_aai	= default_spi_write_aai,
+};
+
 static const struct par_programmer par_programmer_satamv = {
 		.chip_readb		= satamv_chip_readb,
 		.chip_readw		= fallback_chip_readw,
@@ -57,6 +89,44 @@ 
 		.chip_writen		= fallback_chip_writen,
 };
 
+static int init_94xx(struct pci_dev *dev)
+{
+	uintptr_t addr;
+	uint32_t tmp;
+
+	msg_pspew("Initializing 94xx\n");
+
+	addr = pcidev_readbar(dev, PCI_BASE_ADDRESS_2);
+	if (!addr)
+		return 1;
+	msg_pspew("addr=0x%08" PRIXPTR "\n", addr);
+
+	mv_bar = rphysmap("Marvell 88SE94xx registers", addr, 0x40000);
+	if (mv_bar == ERROR_PTR)
+		return 1;
+	msg_pspew("mv_bar=%p\n", mv_bar);
+
+	/* Read some registers for fun.
+	 * TODO: Remove once everything is working
+	 */
+	tmp = pci_mmio_readl(mv_bar + EXPANSION_ROM_WINDOW0_REMAP);
+	msg_pspew("PCIe Expansion ROM Window Remap: 0x%04x\n", tmp);
+
+	tmp = pci_mmio_readl(mv_bar + MV94XX_SPI_CONTROL);
+	msg_pspew("SPI Flash Control: 0x%08x\n", tmp);
+
+	tmp = pci_mmio_readl(mv_bar + MV94XX_SPI_ADDRESS);
+	msg_pspew("SPI Flash Address: 0x%08x\n", tmp);
+
+	tmp = pci_mmio_readl(mv_bar + MV94XX_SPI_READ_DATA);
+	msg_pspew("SPI Flash Read Data: 0x%08x\n", tmp);
+
+	/* Register SPI programmer */
+	register_spi_programmer(&spi_programmer_satamv);
+
+	return 0;
+}
+
 /*
  * Random notes:
  * FCE#		Flash Chip Enable
@@ -78,6 +148,7 @@ 
 	struct pci_dev *dev = NULL;
 	uintptr_t addr;
 	uint32_t tmp;
+	uint16_t id;
 
 	if (rget_io_perms())
 		return 1;
@@ -87,6 +158,12 @@ 
 	if (!dev)
 		return 1;
 
+	id = dev->device_id;
+
+	/* If 9445, do separate init */
+	if (id == 0x9445)
+		return init_94xx(dev);
+
 	addr = pcidev_readbar(dev, PCI_BASE_ADDRESS_0);
 	if (!addr)
 		return 1;
@@ -192,6 +269,118 @@ 
 	return satamv_indirect_chip_readb(addr);
 }
 
+static int satamv_spi_send_command(struct flashctx *flash, unsigned int writecnt,
+		unsigned int readcnt,
+		const unsigned char *writearr,
+		unsigned char *readarr)
+{
+	uint32_t tmp;
+	uint32_t spi_cntl = 0x0;
+	int i;
+
+	if (writecnt == 0) {
+		msg_perr("%s: Tried to send an empty SPI command!\n"
+			 "Please report a bug at flashrom@flashrom.org\n", __func__);
+		return ERROR_FLASHROM_BUG;
+	}
+	if (!(((readcnt == 0) && (writecnt <= 8)) || (((writecnt == 1) || (writecnt == 4)) && (readcnt <= 4)))) {
+		msg_pinfo("%s called with unsupported readcnt(%i)/writecnt(%i) combination.\n", __func__,
+			  readcnt, writecnt);
+		return SPI_INVALID_LENGTH;
+	}
+
+	msg_pspew("%s:", __func__);
+	msg_pspew(" SPI Flash Control Start: 0x%08x", pci_mmio_readl(mv_bar + MV94XX_SPI_CONTROL));
+	msg_pspew(" writecnt=%d, readcnt=%d\n", writecnt, readcnt);
+
+	for (i = 0; i < writecnt; i++)
+		msg_pspew("writearr[%d]=0x%x\n", i, writearr[i]);
+
+	do {
+		tmp = pci_mmio_readl(mv_bar + MV94XX_SPI_CONTROL);
+		msg_pspew("SPI Flash Control during busy wait (while loop 1): 0x%08x\n", tmp);
+		tmp &= 0x1;
+	} while (tmp);
+
+
+	/* Clear WRITE_DATA and READ_DATA. Unneeded, but a great help for debugging. */
+	pci_mmio_writel(0xffffffff, mv_bar + MV94XX_SPI_WRITE_DATA);
+	pci_mmio_writel(0xffffffff, mv_bar + MV94XX_SPI_READ_DATA);
+
+	if (readcnt > 0) {
+		switch (writecnt) {
+		case 4:
+			spi_cntl |= MV94XX_SPI_ADDR_PHASE;
+			pci_mmio_writel((writearr[1] << 16) | (writearr[2] << 8) | writearr[3],
+					mv_bar + MV94XX_SPI_ADDRESS);
+		case 1:
+			break;
+		}
+		spi_cntl |= MV94XX_SPI_DATA_DIR_READ;
+		spi_cntl |= readcnt << 4;
+		spi_cntl |= writearr[0] << 8;
+	} else {
+		uint32_t wr_data = 0xffffffff;
+		switch (writecnt) {
+		case 8:
+			wr_data = (writearr[7] << 24) | (writearr[6] << 16) | (writearr[5] << 8) | writearr[4];
+			break;
+		case 7:
+			wr_data = (writearr[6] << 16) | (writearr[5] << 8) | writearr[4];
+			break;
+		case 6:
+			wr_data = (writearr[5] << 8) | writearr[4];
+			break;
+		case 5:
+			wr_data = (writearr[4] << 24) | (writearr[3] << 16) | (writearr[2] << 8) | writearr[1];
+			break;
+		case 4:
+			wr_data = (writearr[3] << 16) | (writearr[2] << 8) | writearr[1];
+			break;
+		case 3:
+			wr_data = (writearr[2] << 8) | writearr[1];
+			break;
+		case 2:
+			wr_data = writearr[1];
+			break;
+		case 1:
+			/* Only a command, no data. */
+			break;
+		}
+		if (writecnt >= 6) {
+			/* Have to use the address field. */
+			spi_cntl |= MV94XX_SPI_ADDR_PHASE;
+			pci_mmio_writel((writearr[1] << 16) | (writearr[2] << 8) | writearr[3],
+					mv_bar + MV94XX_SPI_ADDRESS);
+			spi_cntl |= (writecnt - 3) << 4;
+		} else {
+			spi_cntl |= writecnt << 4;
+		}
+		pci_mmio_writel(wr_data, mv_bar + MV94XX_SPI_WRITE_DATA);
+		spi_cntl |= writearr[0] << 8;
+	}
+
+	pci_mmio_writel(spi_cntl, mv_bar + MV94XX_SPI_CONTROL);
+	pci_mmio_writel(spi_cntl | MV94XX_SPI_START, mv_bar + MV94XX_SPI_CONTROL);
+			
+	do {
+		tmp = pci_mmio_readl(mv_bar + MV94XX_SPI_CONTROL);
+		msg_pspew("SPI Flash Control during busy wait (while loop 1): 0x%08x\n", tmp);
+		tmp &= 0x1;
+	} while (tmp);
+
+
+	if (readcnt > 0) {
+		tmp = pci_mmio_readl(mv_bar + MV94XX_SPI_READ_DATA);
+		for (i = 0; i < readcnt; i++)
+			readarr[i] = (tmp >> (i * 8)) & 0xff;
+	}
+
+	msg_pspew("SPI Flash Control End: 0x%08x\n", pci_mmio_readl(mv_bar + MV94XX_SPI_CONTROL));
+
+	return 0;
+}
+
 #else
 #error PCI port I/O access is not supported on this architecture yet.
 #endif
Index: flashrom-satamv_spi_mv94xx/programmer.h
===================================================================
--- flashrom-satamv_spi_mv94xx/programmer.h	(Revision 1780)
+++ flashrom-satamv_spi_mv94xx/programmer.h	(Arbeitskopie)
@@ -527,6 +527,9 @@ 
 #if CONFIG_USBBLASTER_SPI == 1
 	SPI_CONTROLLER_USBBLASTER,
 #endif
+#if CONFIG_SATAMV == 1
+	SPI_CONTROLLER_SATAMV,
+#endif
 };
 
 #define MAX_DATA_UNSPECIFIED 0