===================================================================
@@ -0,0 +1,37 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2009 coresystems GmbH
+ * Copyright (C) 2009 Libra Li <libra.li@technexion.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* AMD Chipset */
+#define AMD_RS690_INT15 0x4E08
+
+typedef struct __rs690_int15_regs__
+{
+ u8 fun00_panel_id; // Callback Sub-Function 00h - Get LCD Panel ID
+ u8 fun05_tv_standard; // Callback Sub-Function 05h - Select Boot-up TV Standard
+}rs690_int15_regs;
+
+typedef struct __rs690_vbios_regs__
+{
+ rs690_int15_regs int15_regs;
+}rs690_vbios_regs;
+
+/* Initialization VBIOS function */
+extern void vgabios_init(rs690_vbios_regs *vbios_regs);
===================================================================
@@ -33,6 +33,7 @@
obj-y += tn_post_code.o
obj-y += speaker.o
+obj-y += vgabios.o
# This is part of the conversion to init-obj and away from included code.
===================================================================
@@ -145,20 +145,6 @@
}
#endif /* CONFIG_USE_FALLBACK_IMAGE == 1 */
-/* Early mainboard specific GPIO setup. */
-static void mb_gpio_init(void)
-{
- /* Init Super I/O GPIOs. Done early. */
- it8712f_enter_conf();
- outb(IT8712F_CONFIG_REG_LDN, SIO_INDEX);
- outb(IT8712F_GPIO, SIO_DATA);
- outb(0x62, SIO_INDEX); // set Simple I/O Base Address 0x200
- outb(0x02, SIO_DATA);
- outb(0x63, SIO_INDEX);
- outb(0x00, SIO_DATA);
- it8712f_exit_conf();
-}
-
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
@@ -191,7 +177,6 @@
/* it8712f_enable_serial does not use its 1st parameter. */
it8712f_enable_serial(0, CONFIG_TTYS0_BASE);
- mb_gpio_init();
it8712f_kill_watchdog();
uart_init();
console_init();
===================================================================
@@ -0,0 +1,83 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2009 coresystems GmbH
+ * Copyright (C) 2009 Libra Li <libra.li@technexion.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <stdlib.h>
+#include <console/console.h>
+#include <arch/interrupt.h>
+#include "vgabios.h"
+
+
+int tim5690_int15_handler(struct eregs *regs);
+
+static rs690_vbios_regs vbios_regs_local;
+
+/* Initialization interrupt function */
+static void vbios_fun_init(rs690_vbios_regs *vbios_regs)
+{
+ vbios_regs_local.int15_regs.fun00_panel_id = vbios_regs->int15_regs.fun00_panel_id;
+ vbios_regs_local.int15_regs.fun05_tv_standard = vbios_regs->int15_regs.fun05_tv_standard;
+}
+/* BIOS int15 function */
+int tim5690_int15_handler(struct eregs *regs)
+{
+ int res = -1;
+
+ printk(BIOS_DEBUG, "tim5690_int15_handler: \n");
+
+ switch (regs->eax & 0xffff) {
+ case AMD_RS690_INT15:
+ switch (regs->ebx & 0xff) {
+ case 0x00:
+ regs->eax &= ~(0xff);
+ regs->ebx = (regs->ebx & ~(0xff)) | vbios_regs_local.int15_regs.fun00_panel_id;
+ res = 0;
+ break;
+ case 0x05:
+ regs->eax &= ~(0xff);
+ regs->ebx = (regs->ebx & ~(0xff)) | vbios_regs_local.int15_regs.fun05_tv_standard;
+ res = 0;
+ break;
+ }
+ break;
+ default:
+ printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n",
+ regs->eax & 0xffff);
+ break;
+ }
+
+ return res;
+}
+
+/* Initialization VBIOS function */
+void vgabios_init(rs690_vbios_regs *vbios_regs)
+{
+ interrupt_handlers intXX_func={NULL};
+
+ printk(BIOS_DEBUG, "vgabios_init: \n");
+
+ /* int15 */
+ intXX_func.mask[0x15] = 1;
+ intXX_func.intXX_handler[0x15] = &tim5690_int15_handler;
+
+ mainboard_interrupt_handlers(&intXX_func);
+ vbios_fun_init(vbios_regs);
+}
===================================================================
@@ -26,13 +26,56 @@
#include <cpu/amd/mtrr.h>
#include <device/pci_def.h>
#include <../southbridge/amd/sb600/sb600.h>
+#include <../superio/ite/it8712f/it8712f.h>
#include "chip.h"
#include "tn_post_code.h"
+#include "vgabios.h"
#define ADT7461_ADDRESS 0x4C
#define ARA_ADDRESS 0x0C /* Alert Response Address */
#define SMBUS_IO_BASE 0x1000
+
+/* Video BIOS Function Extensions Specification
+ */
+//Callback Sub-Function 00h - Get LCD Panel ID
+#define LCD_PANEL_ID_NO 0x00 /* No LCD */
+#define LCD_PANEL_ID_01 0x01 /* 1024x768, 24 bits, 1 channel */
+#define LCD_PANEL_ID_02 0x02 /* 1280x1024, 24 bits, 2 channels */
+#define LCD_PANEL_ID_03 0x03 /* 1440x900, 24 bits, 2 channels */
+#define LCD_PANEL_ID_04 0x04 /* 1680x1050, 24 bits, 2 channels */
+#define LCD_PANEL_ID_05 0x05 /* 1920x1200, 24 bits, 2 channels */
+#define LCD_PANEL_ID_06 0x06 /* 1920x1080, 24 bits, 2 channels */
+//Callback Sub-Function 05h – Select Boot-up TV Standard
+#define TV_MODE_00 0x00 /* NTSC */
+#define TV_MODE_01 0x01 /* PAL */
+#define TV_MODE_02 0x02 /* PALM */
+#define TV_MODE_03 0x03 /* PAL60 */
+#define TV_MODE_04 0x04 /* NTSCJ */
+#define TV_MODE_05 0x05 /* PALCN */
+#define TV_MODE_06 0x06 /* PALN */
+#define TV_MODE_09 0x09 /* SCART-RGB */
+#define TV_MODE_NO 0xff /* No TV Support */
+
+
+/* The base address is 0x2e or 0x4e, depending on config bytes. */
+#define SIO_BASE 0x2e
+#define SIO_INDEX SIO_BASE
+#define SIO_DATA SIO_BASE+1
+
+/* Global configuration registers. */
+#define IT8712F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */
+#define IT8712F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */
+#define IT8712F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */
+#define IT8712F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */
+#define IT8712F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend, Flash I/F. */
+#define IT8712F_CONFIG_REG_MFC 0x2a /* Multi-function control */
+#define IT8712F_CONFIG_REG_WATCHDOG 0x72 /* Watchdog control. */
+
+#define IT8712F_CONFIGURATION_PORT 0x2e /* Write-only. */
+#define IT8712F_SIMPLE_IO_BASE 0x200 /* Simple I/O base address */
+
+
extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address);
extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address,
u8 val);
@@ -54,6 +97,36 @@
uint64_t uma_memory_base, uma_memory_size;
+/* The content of IT8712F_CONFIG_REG_LDN (index 0x07) must be set to the
+ LDN the register belongs to, before you can access the register. */
+static void it8712f_sio_write(uint8_t ldn, uint8_t index, uint8_t value)
+{
+ outb(IT8712F_CONFIG_REG_LDN, SIO_BASE);
+ outb(ldn, SIO_DATA);
+ outb(index, SIO_BASE);
+ outb(value, SIO_DATA);
+}
+
+static void it8712f_enter_conf(void)
+{
+ /* Enter the configuration state (MB PnP mode). */
+
+ /* Perform MB PnP setup to put the SIO chip at 0x2e. */
+ /* Base address 0x2e: 0x87 0x01 0x55 0x55. */
+ /* Base address 0x4e: 0x87 0x01 0x55 0xaa. */
+ outb(0x87, IT8712F_CONFIGURATION_PORT);
+ outb(0x01, IT8712F_CONFIGURATION_PORT);
+ outb(0x55, IT8712F_CONFIGURATION_PORT);
+ outb(0x55, IT8712F_CONFIGURATION_PORT);
+}
+
+static void it8712f_exit_conf(void)
+{
+ /* Exit the configuration state (MB PnP mode). */
+ it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CC, 0x02);
+}
+
+
/* set thermal config
*/
static void set_thermal_config(void)
@@ -117,6 +190,48 @@
*/
}
+/* Mainboard specific GPIO setup. */
+void mb_gpio_init(u16 *iobase)
+{
+ /* Init Super I/O GPIOs. */
+ it8712f_enter_conf();
+ outb(IT8712F_CONFIG_REG_LDN, SIO_INDEX);
+ outb(IT8712F_GPIO, SIO_DATA);
+ outb(0x62, SIO_INDEX);
+ outb((*iobase >> 8), SIO_DATA);
+ outb(0x63, SIO_INDEX);
+ outb((*iobase & 0xff), SIO_DATA);
+ it8712f_exit_conf();
+}
+
+/* The LCD's panel id seletion. */
+void lcd_panel_id(rs690_vbios_regs *vbios_regs, u8 num_id)
+{
+ switch (num_id) {
+ case 0x1:
+ vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_01;
+ break;
+ case 0x2:
+ vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_02;
+ break;
+ case 0x3:
+ vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_03;
+ break;
+ case 0x4:
+ vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_04;
+ break;
+ case 0x5:
+ vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_05;
+ break;
+ case 0x6:
+ vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_06;
+ break;
+ default:
+ vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_NO;
+ break;
+ }
+}
+
/*************************************************
* enable the dedicated function in tim5690 board.
* This function called early than rs690_enable.
@@ -126,8 +241,21 @@
struct mainboard_config *mainboard =
(struct mainboard_config *)dev->chip_info;
+ rs690_vbios_regs vbios_regs;
+ u16 gpio_base = IT8712F_SIMPLE_IO_BASE;
+ u8 port2;
+
printk_info("Mainboard tim5690 Enable. dev=0x%p\n", dev);
+ mb_gpio_init(&gpio_base);
+
+ /* The LCD's panel id seletion by switch. */
+ port2 = inb(gpio_base+1);
+ lcd_panel_id(&vbios_regs, ((~port2) & 0xf));
+ /* No support TV */
+ vbios_regs.int15_regs.fun05_tv_standard = TV_MODE_NO;
+ vgabios_init(&vbios_regs);
+
#if (CONFIG_GFXUMA == 1)
msr_t msr, msr2;
===================================================================
@@ -0,0 +1,29 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2009 coresystems GmbH
+ * Copyright (C) 2009 Libra Li <libra.li@technexion.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "registers.h"
+
+typedef struct {
+ int mask[256];
+ int (*intXX_handler[256])(struct eregs *regs);
+}interrupt_handlers;
+
+extern void mainboard_interrupt_handlers(interrupt_handlers * intXX_func);
===================================================================
@@ -29,6 +29,8 @@
#include <console.h>
#endif
+#include <arch/interrupt.h>
+
#define REALMODE_BASE ((void *)0x600)
struct realmode_idt {
@@ -64,6 +66,27 @@
return -1;
}
+/* setup interrupt handlers for mainboard */
+void mainboard_interrupt_handlers(interrupt_handlers * intXX_func)
+{
+ int i;
+
+ /* The first 16 intXX functions are not BIOS services,
+ * but the CPU-generated exceptions ("hardware interrupts").
+ */
+ for (i = 0; i < 0x10; i++)
+ intXX_handler[i] = &intXX_exception_handler;
+
+ /* Mark all other intXX calls as unknown if no specific function */
+ for (i = 0x10; i < 0x100; i++)
+ {
+ if(!intXX_func->mask[i])
+ intXX_handler[i] = &intXX_unknown_handler;
+ else
+ intXX_handler[i] = intXX_func->intXX_handler[i];
+ }
+}
+
int int12_handler(struct eregs *regs);
int int15_handler(struct eregs *regs);
int int1a_handler(struct eregs *regs);
@@ -127,10 +150,13 @@
{
/* clear vga bios data area */
memset((void *)0x400, 0, 0x200);
-
- /* Set up C interrupt handlers */
- setup_interrupt_handlers();
+ if(!(*intXX_handler))
+ {
+ /* Set up C interrupt handlers */
+ setup_interrupt_handlers();
+ }
+
/* Setting up realmode IDT */
setup_realmode_idt();
Hi, The VGA BIOS is through int15 getting LCD panel ID. Then the VBIOS call int15's "Get LCD panel ID". The panel ID is selection by switch. This function is reference "AMD RS690 ASIC Family BIOS Developer's Guide". Thanks. Signed-off-by: Libra Li <libra.li@technexion.com>