===================================================================
@@ -176,7 +176,7 @@ define CONFIG_USE_INIT
comment "Use stage 1 initialization code"
end
-define COREBOOT_V2
+define CONFIG_COREBOOT_V2
default 1
export always
comment "This is used by code to determine v2 vs v3"
===================================================================
@@ -36,7 +36,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
#include <arch/io.h>
#include <console/console.h>
#else
===================================================================
@@ -35,7 +35,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
#include <console/console.h>
#else
#include <console.h>
@@ -65,7 +65,7 @@ int pcibios_handler(void)
break;
case FIND_PCI_DEVICE:
/* FixME: support SI != 0 */
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
dev = dev_find_device(X86_DX, X86_CX, dev);
#else
dev = dev_find_pci_device(X86_DX, X86_CX, dev);
===================================================================
@@ -23,7 +23,7 @@
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <string.h>
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
#include <console/console.h>
#include <arch/io.h>
#define printk(x...) do_printk(x)
@@ -87,7 +87,7 @@ int int1a_handler(struct eregs *regs)
vendorid = regs->edx;
devindex = regs->esi;
dev = 0;
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
while ((dev = dev_find_device(vendorid, devid, dev))) {
#else
while ((dev = dev_find_pci_device(vendorid, devid, dev))) {
===================================================================
@@ -20,7 +20,7 @@
#include <device/pci.h>
#include <string.h>
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
#include <arch/io.h>
#include <console/console.h>
#define printk(x...) do_printk(x)
===================================================================
@@ -46,7 +46,7 @@
#include "debug.h"
#include "prim_ops.h"
#if 1 /* Coreboot needs to map prinkf to printk. */
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
#include "arch/io.h"
#else
#include "io.h"
===================================================================
@@ -14,7 +14,7 @@
#include <string.h>
#include <types.h>
-#ifndef COREBOOT_V2
+#ifndef CONFIG_COREBOOT_V2
#include <cpu.h>
#endif
@@ -22,7 +22,7 @@
#include <x86emu/x86emu.h>
#include <x86emu/regs.h>
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
#include "../x86emu/prim_ops.h"
#else
#include <x86emu/prim_ops.h> // for push_word
@@ -35,7 +35,7 @@
#include "device.h"
#include "pmm.h"
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
#include "compat/rtas.h"
#else
#include <rtas.h>
===================================================================
@@ -14,7 +14,7 @@
*/
#include <types.h>
-#ifndef COREBOOT_V2
+#ifndef CONFIG_COREBOOT_V2
#include <config.h>
#endif
#include <device/device.h>
===================================================================
@@ -11,7 +11,7 @@
* IBM Corporation - initial implementation
*****************************************************************************/
-#ifndef COREBOOT_V2
+#ifndef CONFIG_COREBOOT_V2
#include <cpu.h>
#endif
===================================================================
@@ -20,7 +20,7 @@ extern u32 debug_flags;
extern void x86emu_dump_xregs(void);
/* printf is not available in coreboot... use printk */
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
#include <console/console.h>
#else
#include <console.h>
===================================================================
@@ -13,7 +13,7 @@
#include "device.h"
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
#include "compat/rtas.h"
#else
#include "rtas.h"
@@ -397,7 +397,7 @@ biosemu_dev_init(struct device * device)
{
u8 rval = 0;
//init bios_device struct
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
DEBUG_PRINTF("%s\n", __func__);
#else
DEBUG_PRINTF("%s(%s)\n", __func__, device->dtsname);
===================================================================
@@ -15,7 +15,7 @@
#define DEVICE_LIB_H
#include <types.h>
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
#include <arch/byteorder.h>
#include "compat/of.h"
#else
===================================================================
@@ -11,7 +11,7 @@
* IBM Corporation - initial implementation
*****************************************************************************/
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
#include "compat/rtas.h"
#else
#include <rtas.h>
@@ -24,7 +24,7 @@
#include "pmm.h"
#include <x86emu/x86emu.h>
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
#include "../x86emu/prim_ops.h"
#else
#include <x86emu/prim_ops.h>
@@ -350,7 +350,7 @@ handleInt1a(void)
__func__, M.x86.R_AX);
/* FixME: support SI != 0 */
#if defined(CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES) && CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES==1
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
dev = dev_find_device(M.x86.R_DX, M.x86.R_CX, 0);
#else
dev = dev_find_pci_device(M.x86.R_DX, M.x86.R_CX, 0);
===================================================================
@@ -12,7 +12,7 @@
*****************************************************************************/
#include <types.h>
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
#include "compat/rtas.h"
#include "compat/time.h"
#else
===================================================================
@@ -12,14 +12,14 @@
*****************************************************************************/
#include <types.h>
-#ifndef COREBOOT_V2
+#ifndef CONFIG_COREBOOT_V2
#include <cpu.h>
#endif
#include "debug.h"
#include "device.h"
#include "x86emu/x86emu.h"
#include "biosemu.h"
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
#include "compat/time.h"
#else
#include <time.h>
===================================================================
@@ -10,7 +10,7 @@
****************************************************************************/
#include <x86emu/x86emu.h>
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
#include "../x86emu/prim_ops.h"
#else
#include <x86emu/prim_ops.h>
===================================================================
@@ -13,7 +13,7 @@
#include <string.h>
#include <types.h>
-#ifndef COREBOOT_V2
+#ifndef CONFIG_COREBOOT_V2
#include <cpu.h>
#endif
@@ -21,7 +21,7 @@
#include <x86emu/x86emu.h>
#include <x86emu/regs.h>
-#ifdef COREBOOT_V2
+#ifdef CONFIG_COREBOOT_V2
#include "../x86emu/prim_ops.h"
#else
#include <x86emu/prim_ops.h> // for push_word
Hi, another patch to prepare for kconfig. This one renames COREBOOT_V2 to CONFIG_COREBOOT_V2 and adapts its user (x86emu) to match. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>